A hollow cylinder that is designed for oral insertion via the trachea and into a lung to maintain airway patency and/or to deliver anaesthetic inhalation agents or other medical gases, and secure ventilation. It is typically made of plastic, rubber, or silicone and may be packaged with a connector that attaches to a breathing circuit and is available in two basic configurations: 1) a double lumen tube with independent cuffs at the distal end for ventilation of the left or right bronchi; or 2) a twin lumen tube with independent cuffs for selective lung ventilation during thoracic surgery or postoperative care when independent lung ventilation is indicated. This is a single-use device.

A hollow cylinder that is designed for oral insertion via the trachea and into a lung to maintain airway patency and/or to deliver anaesthetic inhalation agents or other medical gases, and secure ventilation. It is typically made of plastic, rubber, or silicone and may be packaged with a connector that attaches to a breathing circuit and is available in two basic configurations: 1) a double lumen tube with independent cuffs at the distal end for ventilation of the left or right bronchi; or 2) a twin lumen tube with independent cuffs for selective lung ventilation during thoracic surgery or postoperative care when independent lung ventilation is indicated. This is a single-use device.

A hollow cylinder that is designed for oral insertion via the trachea and into a lung to maintain airway patency and/or to deliver anaesthetic inhalation agents or other medical gases, and secure ventilation. It is typically made of plastic, rubber, or silicone and may be packaged with a connector that attaches to a breathing circuit and is available in two basic configurations: 1) a double lumen tube with independent cuffs at the distal end for ventilation of the left or right bronchi; or 2) a twin lumen tube with independent cuffs for selective lung ventilation during thoracic surgery or postoperative care when independent lung ventilation is indicated. This is a single-use device.

A hollow cylinder that is designed for oral insertion via the trachea and into a lung to maintain airway patency and/or to deliver anaesthetic inhalation agents or other medical gases, and secure ventilation. It is typically made of plastic, rubber, or silicone and may be packaged with a connector that attaches to a breathing circuit and is available in two basic configurations: 1) a double lumen tube with independent cuffs at the distal end for ventilation of the left or right bronchi; or 2) a twin lumen tube with independent cuffs for selective lung ventilation during thoracic surgery or postoperative care when independent lung ventilation is indicated. This is a single-use device.

A hollow cylinder that is designed for oral insertion via the trachea and into a lung to maintain airway patency and/or to deliver anaesthetic inhalation agents or other medical gases, and secure ventilation. It is typically made of plastic, rubber, or silicone and may be packaged with a connector that attaches to a breathing circuit and is available in two basic configurations: 1) a double lumen tube with independent cuffs at the distal end for ventilation of the left or right bronchi; or 2) a twin lumen tube with independent cuffs for selective lung ventilation during thoracic surgery or postoperative care when independent lung ventilation is indicated. This is a single-use device.

A hollow cylinder that is designed for oral insertion via the trachea and into a lung to maintain airway patency and/or to deliver anaesthetic inhalation agents or other medical gases, and secure ventilation. It is typically made of plastic, rubber, or silicone and may be packaged with a connector that attaches to a breathing circuit and is available in two basic configurations: 1) a double lumen tube with independent cuffs at the distal end for ventilation of the left or right bronchi; or 2) a twin lumen tube with independent cuffs for selective lung ventilation during thoracic surgery or postoperative care when independent lung ventilation is indicated. This is a single-use device.

A hollow cylinder that is designed for oral insertion via the trachea and into a lung to maintain airway patency and/or to deliver anaesthetic inhalation agents or other medical gases, and secure ventilation. It is typically made of plastic, rubber, or silicone and may be packaged with a connector that attaches to a breathing circuit and is available in two basic configurations: 1) a double lumen tube with independent cuffs at the distal end for ventilation of the left or right bronchi; or 2) a twin lumen tube with independent cuffs for selective lung ventilation during thoracic surgery or postoperative care when independent lung ventilation is indicated. This is a single-use device.

SILBRONCHO Tube is intended for use in airway management of surgical patients to perform one-lung ventilation in thoracic surgery, lung resection, VATS, lobectomy and etc.

SILBRONCHO Tube is intended for use in airway management of surgical patients to perform one-lung ventilation in thoracic surgery, lung resection, VATS, lobectomy and etc.

The Chartis Catheter is a single use, sterile, disposable device designed to be inserted into a 2.8mm working channel of a standard video bronchoscope during a diagnostic bronchoscopy procedure. The Chartis Catheter is a hollow catheter shaft made of medical-grade PEBAX. The Chartis Catheter is 169 cm in length with a working length of 72 cm and a 2.7 mm outer diameter. The distal end of the catheter employs an inflatable balloon made from a compliant elastomeric material. The catheter has two lumens: the main lumen allows air flow from the isolated lung compartment to the Console, and the second smaller lumen allows balloon inflation. The proximal end of the catheter has two ports, a balloon inflation port to inflate the distal balloon, and an obturator port with a luer fitting for connection to the Chartis Console via the Connector Set. A custom obturator inserted into the main lumen of the catheter is used for both pushability and to clear mucus that may obstruct the lumen during catheter manipulation in the airways. The only portion of the device that comes into bodily contact is the distal tip of the catheter, which is made from medical grade PEBAX (shaft) and a compliant elastomeric material (balloon). No medicinal substances are eluted from the catheter.

Parker Endo-Bronch with Flex-Tip (Left Double-lumen Endobronchial Tube), PFTDL , 28 Fr, O.D 9.0mm, I.D 3.2mmParker Original DID: 10749065061324.

Parker Endo-Bronch with Flex-Tip (Left Double-lumen Endobronchial Tube), PFTDL , 32 Fr, O.D 10.0mm, I.D 3.8mmParker Original DID: 10749065061386.

Parker Endo-Bronch with Flex-Tip (Left Double-lumen Endobronchial Tube), PFTDL , 35 Fr, O.D 10.0mm, I.D 4.0mmParker Original DID: 10749065061409.

Parker Endo-Bronch with Flex-Tip (Left Double-lumen Endobronchial Tube), PFTDL , 37 Fr, O.D 11.5mm, I.D 4.4mmParker Original DID: 10749065061447.

Parker Endo-Bronch with Flex-Tip (Left Double-lumen Endobronchial Tube), PFTDL , 39 Fr, O.D 11.5mm, I.D 4.6mmParker Original DID: 10749065061461.

Parker Endo-Bronch with Flex-Tip (Left Double-lumen Endobronchial Tube), PFTDL , 41 Fr, O.D 12.0mm, I.D 5.0mmParker Original DID: 10749065061508.

Parker Endo-Bronch with Standard Tip (Left Double-lumen Endobronchial Tube), PSTDL, 28 Fr, O.D 9.0mm, I.D 3.2mmParker Original DID: 10749065851321.

Parker Endo-Bronch with Standard Tip (Left Double-lumen Endobronchial Tube), PSTDL, 32 Fr, O.D 10.0mm, I.D 3.8mmParker Original DID: 10749065851383.

Parker Endo-Bronch with Standard Tip (Left Double-lumen Endobronchial Tube), PSTDL, 35 Fr, O.D 10.5mm, I.D 4.0mmParker Original DID: 10749065851406.

Parker Endo-Bronch with Standard Tip (Left Double-lumen Endobronchial Tube), PSTDL, 37 Fr, O.D 11.5mm, I.D 4.4mmParker Original DID: 10749065851444.

Parker Endo-Bronch with Standard Tip (Left Double-lumen Endobronchial Tube), PSTDL, 39 Fr, O.D 11.5mm, I.D 4.6mmParker Original DID: 10749065851468.

Parker Endo-Bronch with Standard Tip (Left Double-lumen Endobronchial Tube), PSTDL, 41 Fr, O.D 12.0mm, I.D 5.0mmParker Original DID: 10749065851505.

Parker Endo-Bronch with Standard Tip (Right Double-lumen Endobronchial Tube), PSTDR, 28 FrParker Original DID: 10749065861320.

Parker Endo-Bronch with Standard Tip (Right Double-lumen Endobronchial Tube), PSTDR, 32 Fr Parker Original DID: 10749065861382.

Parker Endo-Bronch with Standard Tip (Right Double-lumen Endobronchial Tube), PSTDR, 35 Fr Parker Original DID: 10749065861405.

Parker Endo-Bronch with Standard Tip (Right Double-lumen Endobronchial Tube), PSTDR, 37 Fr Parker Original DID: 10749065861443.

Parker Endo-Bronch with Standard Tip (Right Double-lumen Endobronchial Tube), PSTDR, 39 Fr Parker Original DID: 10749065861467.

ET TUBE, SHER-I-BRONCH, LS, 28 FR

ET TUBE, SHER-I-BRONCH, LS, 35 FR

ET TUBE, SHER-I-BRONCH, LS, 37 FR

ET TUBE, SHER-I-BRONCH, LS, 39 FR

ET TUBE, SHER-I-BRONCH, LS, 41 FR

ET TUBE, SHER-I-BRONCH, RS, 28 FR

ET TUBE, SHER-I-BRONCH, RS, 35 FR

ET TUBE, SHER-I-BRONCH, RS, 37 FR

ET TUBE, SHER-I-BRONCH, RS, 39 FR

ET TUBE, SHER-I-BRONCH, RS, 41 FR

EZ-Blocker(TM)

left Fr28

left Fr32

left Fr35

left Fr37

left Fr39

left Fr41

right Fr28

right Fr32

right Fr35

right Fr37

right Fr39

right Fr41