The tips (H3, H4L/R) used with a push stroke without scraping are designed for :- sub-gingival scaling, - non-surgical treatment of deepand narrow pockets (>4-6mm), - open treatments (flap surgery). Diamond-coated tips (H1, H2L/R), used in the second step, are designed to remove calculus from very narrow inter-root spaces and furcations. They are used with very low pressure and are also recommended for the debridement of periodontal abscesses and for odontoplasty during non-surgical treatment.

Pack with NEWTRON 2 LED Handpiece

Fine condenser,length 40mm, taper 4%The SO4 tip is designed for lateralcondensation of gutta percha by heatingeffect. It is used dry, without irrigation

Retreatment tip,length 20mm, taper 6%The ET20 steel tip is used in the in the1st coronal third:• Extraction of filling material, silver points,broken instruments.• Removal of debris and the smear layer

Long retreatment tip,40mm, taper 4%The ET40 is a steel tip for rapid removal ofbroken instruments in the middle third of wide,straight canals

Diamond-coated retreatment tip,30 μm, length 20mm,taper 5%The ET20D tip in diamond-coated steel is usedin the 1st coronal third to remove very hardmaterials by brushing the walls

Long retreatment tip,40mm, diamond-coated 30 μm,taper 4%The ET40D is a diamond-coated steel tipfor retreatment of very hard materialin the middle third.

Diamond-coated steel tip 76μm,length 18mm, taper 5%The ET18D tip is a diamond-coated tip for:• Finishing the access cavity.• Removing dentine overhangs,calcifications and filling materials

Titanium-Niobium tip,length 20mm, taper 3%Suggested tip for retreatment in the middleand apical thirds and the extraction of brokeninstruments.

Loosening tip(post removal)Powerful steel tip for loosening posts and crowns.Used with irrigation, in contact with the prostheticelement to be loosened and at maximum power.

Diamond-coated ball tip,length 20mm, taper 5%Diamond-coated ball tip for searchingfor canals and locating calcified canals.

Short Titanium-Niobium tip,length 15mm, taper 4%The ET25S (short) tip is designedfor retreatment in the coronal thirdand the isthmuses.

Long Titanium-Niobium tip,25mm, taper 3%The ET25L (long) is suitable for retreatmentin the apical third and long, straight canals..

EndoSuccess Canal Access Prep Kitsupplied with CAP1, CAP2 and CAP3 tips, metal holder and autoclavable universal wrench...

Micro-blade tip length 12mm,taper 6%The CAP1 tip is used with the active lateralpart for:• Finishing walls and polishing.• Removing temporary cementand dentinal residues.• Removing dentin overhangs

Micro-blade tip, length 9mm,taper 5%The CAP2 tip has active lateral part andextremity and is used by sweeping methodto remove dentine bridges.• Location of the MB2 (2nd mesiobuccal canal)and search for hidden canals.• Preparation of the pulp chamber.• Removal of the dentine layer which may hidethe access to the MB2 canal.

Micro-blade tip, length 8mmtaper 6%The CAP3 tip has a very pointed extremityindicated for:• Locating and opening the calcified canals.• Fragmenting calcifications or pulp stonesin the pulp chamber.• Loosening fiber posts.• Locating accessory canals

The PAM MINILED AF is a curing light using second generation L.E.D technology. It's one of the only lights able to polymerize almost all types of composite material available today.

The PAM MINILED is a curing light using second generation L.E.D technology. It's one of the only lights able to polymerize almost all types of composite material available today.

The PAM MINILED is a curing light using second generation L.E.D technology. It's one of the only lights able to polymerize almost all types of composite material available today.

The MINILED OEM is a curing light using second generation L.E.D technology. It's one of the only lights able to polymerize almost all types of composite material available today.

The PAM MINILED is a curing light using second generation L.E.D technology. It's one of the only lights able to polymerize almost all types of composite material available today.

The PAM MINILED is a curing light using second generation L.E.D technology. It's one of the only lights able to polymerize almost all types of composite material available today.

The PAM MINILED is a curing light using second generation L.E.D technology. It's one of the only lights able to polymerize almost all types of composite material available today.

The PAM MINILED is a curing light using second generation L.E.D technology. It's one of the only lights able to polymerize almost all types of composite material available today.

The PAM MINILED is a curing light using second generation L.E.D technology. It's one of the only lights able to polymerize almost all types of composite material available today.

The PAM MINILED is a curing light using second generation L.E.D technology. It's one of the only lights able to polymerize almost all types of composite material available today.

The PAM MINILED AF is a curing light using second generation L.E.D technology. It's one of the only lights able to polymerize almost all types of composite material available today.

The PAM MINILED is a curing light using second generation L.E.D technology. It's one of the only lights able to polymerize almost all types of composite material available today.

The SCANWAVE OEM is a curing light using second generation L.E.D technology. It's one of the only lights able to polymerize almost all types of composite material available today.

Satelec Handpiece GII is an autoclavable handpiece that is designed for the P5 Newtron®, P Max Newtron XS™, and Prophy Max™ ultrasonic generators.

The SP Newtron module is a multi-clinic piezo-ultrasonic unit that drives four modes (Perio, Endo, Scaling and "Boost")

The SP Newtron module is a multi-clinic piezo-ultrasonic unit that drives four modes (Perio, Endo, Scaling and "Boost")

The SP Newtron module is a multi-clinic piezo-ultrasonic unit that drives four modes (Perio, Endo, Scaling and "Boost")

The SP Newtron module is a multi-clinic piezo-ultrasonic unit that drives four modes (Perio, Endo, Scaling and "Boost")

The SP Newtron LED module is a multi-clinic piezo-ultrasonic unit that drives four modes (Perio, Endo, Scaling and "Boost") and compatible with the new SATELEC Newtron LED handpiece

The SP Newtron LED module is a multi-clinic piezo-ultrasonic unit that drives four modes (Perio, Endo, Scaling and "Boost") and compatible with the new SATELEC Newtron LED handpiece

The SP Newtron LED module is a multi-clinic piezo-ultrasonic unit that drives four modes (Perio, Endo, Scaling and "Boost") and compatible with the new SATELEC Newtron LED handpiece

The SP Newtron LED module is a multi-clinic piezo-ultrasonic unit that drives four modes (Perio, Endo, Scaling and "Boost") and compatible with the new SATELEC Newtron LED handpiece

The patented technologies of our NEWTRON® ultrasonic generators, combined with our tips high quality, support you every day with the promise of the best possible care to patients: "I am caring"

Extension set ultrasonic for EndoPilot²:consisting of:Ultrasonic module,Ultrasonic handpiece Newtron/ Satelec,Ultrasonic handpiece cable, Satelec, (aprox. 180cm),Rinsing adapter,Universal wrench,and a half base plate.