OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a fixed anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a stable anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a stable anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a stable anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a fixed anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a fixed anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a fixed anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a fixed anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a fixed anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a fixed anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a fixed anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a fixed anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a fixed anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a fixed anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a fixed anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a fixed anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a fixed anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a fixed anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a fixed anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a fixed anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a fixed anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a fixed anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a stable anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a stable anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a stable anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a stable anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a stable anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a stable anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a stable anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a stable anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a stable anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a stable anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a stable anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

OBS Anchorage Screw consists of stainless steel (ISO 5832-1:2007/ASTM F138-13) and titanium alloy (ISO 5832-3:1996/ASTM F136-13) self-tapping screw with various sizes for applications in the orthodontic field. It is intended to serve as a stable anchorage point for the attachment of orthodontic and pre-prosthetics appliances, in order to facilitate the orthodontic movement of teeth.OBS Anchorage Screw is available in the following diameter and length.• Diameter ( Ø1.5 mm ) x Length ( 8 / 10 / 12 mm )• Diameter ( Ø2.0 mm ) x Length ( 8 / 10 / 12 / 14 mm ) There are three types of OBS Anchorage Screw.• Square collar mushroom head none hole• Square collar mushroom head round hole• Square collar mushroom head slot holeOBS Anchorage Screw and associated accessories are supplied non-sterile and should be sterilized before use.The sterilization recommendations documented in the instructions for use (IFU) are according to “AAMI / ANSI ST79 Comprehensive Guide To Steam Sterilization And Sterility Assurance In Health Care Facilities” have been validated.Use a pre-vacuum sterilization method minimum 4 minutes at a temperature of 132°C (270°F). Drying time is 30 minutes.The devices are used temporarily with the intention to be removed after orthodontic treatment. Screws are intended for single use only.

quattro RH micro Schraube 1.3 x 8mm ster

quattro RH mini Schraube 1.6x7.5mm steri

quattro RH mini Schraube 1.6x10mm steril

quattro BH mini plus Schr 1.6x7.5mm ster

quattro BH mini plus Schr 1.6x10mm steri

quattro BH mini Schraube 1.5x7mm steril

quattro BH mini Schraube 1.5x9mm steril

quattro BH mini Schraube 1.5x11mm steril

quattro BH mini Schraube 2.0x7mm steril

quattro BH mini Schraube 2.0x9mm steril

quattro BH mini Schraube 2.0x11mm steril

quattro BH mini Schraube 2.0x13mm steril

quattro plusV steril 2.0x11mm 22/28"

quattro plusV steril 2.0x13mm 22/28"

quattro plusV Notf steril 2.3x9mm 22/28"

BENEfit Schraube steril 2.0x 5mm