WECK LAPAROSCOPIC CLIP APPLIER; 5MM X 33CM MED/LG POLYMER CLIPS (GREEN)

THORASCOPIC FOERSTER CLAMP W/RATCHET CURVED LEFT 20MM OVAL RING JAWS 13.25"

10mm, 7.5cm Olympus Style Thoracic Trocar

10mm, 7.5cm Olympus Style Thoracic Cannula

12mm, 7.5cm Olympus Style Thoracic Trocar

12mm, 7.5cm Olympus Style Thoracic Cannula

5MM DIA., 30CM WORKING LENGTH, VATS / MIS ELMED STYLE KNOT PUSHER, 45 DEG., UPWARDS SINGLE ACTION JAW, ERGONOMIC AXIAL HANDLE WITH FLUSHPORT

METZENBAUM SUPER CUT SCISSORS, CURVED WIDE BLADES BLUNT TIPS 3.5MM BLADE LENGTH, 10MM SHAFT, 7 3/4" (19.5CM) WORKING LENGTH, 11 1/2" (29CM) OVERALL LENGTH

FOERESTER LUNG CLAMP / RIGHT / RATCHET

PUSH ROD; 4.75MM X 42CM OVERALL LENGTH, 39CM WORKING LENGTH

5MM 28.5CM OAL & 26.5 WL, IRRIGATION/ SUCTION TUBE WITH 11MM HUB (CHRISTMAS TREE), VENTED, AUTOCLAVABLE STAINLESS STEEL

3MM, 20CM, PYLORIC GRASPER, DOUBLE ACTION JAES, INSERT AND SHAFT

PALPATION PROBE, ROUND ENDS, 5 MM DIA., 34 CM LONG, with CM Marking.

NEEDLE EXTENDER 3"

NEEDLE EXTENDER 4"

10 MM DIA., 33 CM MIXTER GRASPER/DISSECTOR, OFF-SET RIGHT ANGLE, STAINLESS STEEL SHAFT, STAINLESS PISTOL GRIP HANDLE (TYPE 20 HANDLE) RIGID-ONE PIECE

10MM DIA., 33CM, MEEKER LINVATEC STYLE DISSECTING FORCEPS, INSULATED SHAFT #14 INSULATED LINVATEC HANDLE WITH RF POST, ROTATABLE ONE PIECE WITH FLUSH PORT

10MM, 33CM, FENESTRATED GRASPER, 40MM JAW, ROTATABLE, ONE PIECE W/ FLUSHPORT, TYPE 3: NON-INSULATED , STAINLESS STEEL

10MM 33CM RIGHT ANGLE DISSECTOR/GRASPER OFFSET DOUBLE ACTION 15MM JAW, INSULATED SHAFT #14 INSULATED GREY LINVATEC STYLE HANDLE W/RF POST, ROTATABLE ONE PIECE W/FLUSH PORT.

10MM, 36CM, DUVAL GRASPER, 40 MM JAW, AXIAL SERRATIONS, ROTATABLE, ONE-PIECE W/ FLUSHPORT, "TYPE 4 NON-INSULATED STAINLESS-STEEL W/ RATCHET"

BIOPSY SPOON FORCEPS, SHORT, SINGLE-ACTION, 10MM X 36CM, ROTATABLE, ONE-PIECE W/ FLUSH PORT, LIGHTWEIGHT CARBON-FIBER HANDLE W/ RF POST, LARGE FINGER LOOPS

5MM DIA., 45CM, POOLE SUCTION CANNULA, ANGLED UP, WITH HOLE

5MM, 45CM PALPATION PROBE; M= REDUCED TIP 3MM DIA., 10CM WORKING LENGHT W/CM MARKINGS

INSERT / 5MM DIA., 45CM, DEBAKEY GRASPER, 20 MM JAW LENGTH

5MM DIA., 45CM, JOHAN FENESTRATED GRASPER, 22 MM SINGLE-ACTION FLATJAWS, INSULATED SHAFT, STAINLESS STEEL RING AXIAL HANDLE WITH RATCHET, #12, RIGID ONE PIECE

BULLET NOSE GRASPER TC 15MM JAW, MICRO DIAMOND JAW PATTERN (WITH TAPERED DUCKBILL OUTER PROFILE AND 7.5MM PLATFORM INNER JAW), 5MM, 45CM, ROTATABLE ONE PIECE, FLUSHPORT

3.5MM 45CM KLEPPINGER BIPOLAR LAPAROSCOPIC FORCEPS, SPRING HANDLE TYPE III, FLAT PADDLE TIP

CLAW GRASPER, 2 X 3 TEETH, W/ XTRA ROW OF TEETH

INSERT / 5MM DIA., 33CM, ENDO CLINCH FENESTRATED GRASPER

INSERT / 5MM DIA., 33CM, RETRACTION GRASPER, LONG RIDGED JAWS, 2 X 3 ATRAUMATIC TEETH, DOUBLE ACTION

INSERT / 5MM DIA., 33CM, KOCHER GRASPER, 1 X 2 TEETH, DOUBLE ACTION (WECK TYPE)

5MM, 33CM, SCHROEDER TEN. GRASPER, SINGLE TEETH w/ EXTRA GUIDE TOOTH, ROTATABLE, ONE PIECE W/ FLUSHPORT, TYPE 3: NON-INSULATED STAINLESS STEEL

TRIPLE FUNCTION SUCTION/IRRIGATION SHORT HANDLE WITH TWO 7 MM DIA., TRUMPET VALVE (WITHOUT CANNULA)

REUSABLE IRRIGATION/SUCTION SYSTEM WITH TWO-WAY LEVER VALVE AND CANNULA

REUSABLE IRRIGATION/SUCTION SYSTEM WITH DUAL TWO-WAY LEVER VALVES, PISTOL GRIP HANDLE, 5MM & 10MM DIA., 33CM CANNULA

3MM, 30CM, SUCTION TUBE FOR USE W/ 52500-25-00

5 MM DIA., 32 CM, HASSON GRASPER 3 PRONG STRAIGHT ALLIS TEETH, WITH SINGLE FINGER SPRING HANDLE

5MM 33CM OPEN SELF RIGHTING NEEDLE HOLDER, STAINLESS STEEL SHAFT, LIGHTWEIGHT STRAIGHT AXIAL HANDLE W/RATCHET, RIGID ONE PIECE W/ FLUSH PORT

5MM 33CM, NEEDLE HOLDER, CURVED LEFT TUNGSTEN CARBIDE TIP, ERGONOMIC ALUMINUM STRAIGHT SINGLE ACTION AXIAL HANDLE W/ RATCHET, FLUSHPORT

5 MM DIA., 45 CM, NEEDLE HOLDER CURVED RIGHT CROSS SERRATED TUNGSTEN CARBIDE JAW, SCISSOR STYLE RING AXIAL HANDLE WITH RATCHET, FLUSH PORT

5MM, 36CM, ESOPHAGEAL RETRACTOR-GASTRIC BAND MANIPULATOR, 90 DEG., ANGULATION, LIGHTWEIGHT THERMO-PLASTIC W/NO RF POST, W/ RATCHET (TYPE 24)

5MM DIA., 33CM LAP. CLIP APPLICATOR FOR MEDIUM ETHICON CLIPS, 3-PIECE SCREW-APART, FOR USE WITH 6MM DIA., TROCAR SLEEVE.

TYPE 26 REPLACEMENT HANDLE - ALUMINUM AXIAL HANDLE, CURVED DOWN W/RATCHET

5MM DIA., 33 CM, WAVE FUNDUS GRASPER, SINGLE ACTION, INSERT ONLY

5MM DIA., 24 CM, WAVE FUNDUS GRASPER, LONG BEVELED EDGE JAWS, FOR LARGE GRASP ON TISSUE, SINGLE-ACTION, INSULATED SHAFT, SLIDE-LOCK HANDLE, ROTATABLE ONE-PIECE (B)

5MM, 36CM, “JARIT STYLE” GRASPING FORCEPS DUAL CUP, ROTATABLE, ONE PIECE W/ FLUSHPORT SLIDE LOCK HANDLE

3.5MM, 30CM, PALPATION TACTILE PROBE W/ CM MARKING

3MM, 30CM, DOUBLE CUP FUNDUS GRASPER, TYPE 18 - REPLACEMENT LIGHTWEIGHT CARBON-FIBER W/ RF POST, RATCHET / RATCHET DEFEATING

STRAIGHT 8MM 30CM LENGTH TC TIP

SUTURE CONE FOR 54050-03