intraHEAL Proximal Hip Stabilizing Nail - Titanium, Dia. 12 mm, 220 mm Length

intraHEAL Proximal Hip Stabilizing Nail - Titanium, Dia. 12 mm, 200 mm Length

intraHEAL Proximal Hip Stabilizing Nail - Titanium, Dia. 12 mm, 180 mm Length

intraHEAL Proximal Hip Stabilizing Nail - Titanium, Dia. 11 mm, 220 mm Length

intraHEAL Proximal Hip Stabilizing Nail - Titanium, Dia. 11 mm, 200 mm Length

intraHEAL Proximal Hip Stabilizing Nail - Titanium, Dia. 11 mm, 180 mm Length

intraHEAL Proximal Hip Stabilizing Nail - Titanium, Dia. 10 mm, 220 mm Length

intraHEAL Proximal Hip Stabilizing Nail - Titanium, Dia. 10 mm, 200 mm Length

intraHEAL Proximal Hip Stabilizing Nail - Titanium, Dia. 10 mm, 180 mm Length

intraHEALProximal Hip Stabilizing Nail, Dia 10mm, Length 180 mm Length- S.S.

intraHEALProximal Hip Stabilizing Nail, Dia 10mm, Length 200 mm Length - S.S.

intraHEALProximal Hip Stabilizing Nail - Length 220 mm, S.S.

intraHEALProximal Hip Stabilizing Nail - S.S., Dia 11mm, 180 mm Length

intraHEALProximal Hip Stabilizing Nail - S.S., Dia. 11 mm, 200 mm Length

intraHEALProximal Hip Stabilizing Nail - S.S., Dia. 11 mm, 220 mm Length

intraHEALProximal Hip Stabilizing Nail - S.S., Dia. 12 mm, 220 mm Length

intraHEALProximal Hip Stabilizing Nail - S.S., Dia. 12 mm, 200 mm Length

intraHEALProximal Hip Stabilizing Nail - S.S., Dia. 12 mm, 220 mm Length

intraHEAL Proximal Hip Stabilizing Nail, Long - S.S. - Left, Dia. 10 mm, 340 mm Length

intraHEAL Proximal Hip Stabilizing Nail, Long - S.S. - Left, ILBS59L-10, 320 mm Length

intraHEAL Proximal Hip Stabilizing Nail, Long - S.S. - Left, Dia. 10 mm, 300 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 11 mm, 320 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 11 mm, 300 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 11 mm, 280 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 10 mm, 460 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 10 mm, 440 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 10 mm, 420 mm Length.

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 10 mm, 400 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 10 mm, 380 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 10 mm, 360 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 10 mm, 340 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 10 mm, 320 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 10 mm, 300 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 10 mm, 280 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left,Dia. 9 mm, 460 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 9 mm 440 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 9 mm, 420 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 9 mm, 400 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 9 mm, 380 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 9 mm, 360 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 9 mm, 340 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 9 mm, 320 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 9 mm, 300 mm Length

intraHEALMulti Angle Femoral Nail - S.S. - Left, Dia. 9 mm, 280 mm Length

The SACRONAIL system provides a sustained, stable restoration of dorsal pelvic fractures and sacral fractures through its intraosseous location and its direct, bi-iliac symmetric anchorage. The implant consists of a nail of various lengths from135mm to 194mm with a constant diameter of 8mm and 2 locking screws in different lengths. This variation ensures adaptation to the respective anatomy of the patient. The intersections of the screw axes to the implant axis have a distance of 15mm to the respective end face of the nail. This ensures a solid support on the lateral cortex of the Ilia. The angle of the screw axes to the implant axis corresponds to the anatomical conditions and is 70°. The locking screw ensures a stable connection of the components. The tips of the locking screws are rounded to facilitate insertion into the nail while the dorsal ends of locking screws are a hexagon. The caps serve to close the instrument connection of the nail. The implants are made from the Titanium alloy (Ti6Al4V) according to ASTM F 136 / ISO 5832-3, with a Type II anodization according to AMS 2488. There are Instruments which are specific to the implantation of the SACRONAIL device. These include, but are not limited to, the Guide Frame, the Guide Bracket, the Fixation Bracket, various Instrument Guides, various dilators and drills, screwdrivers as well as the specific tools for revision of the device.

The SACRONAIL system provides a sustained, stable restoration of dorsal pelvic fractures and sacral fractures through its intraosseous location and its direct, bi-iliac symmetric anchorage. The implant consists of a nail of various lengths from135mm to 194mm with a constant diameter of 8mm and 2 locking screws in different lengths. This variation ensures adaptation to the respective anatomy of the patient. The intersections of the screw axes to the implant axis have a distance of 15mm to the respective end face of the nail. This ensures a solid support on the lateral cortex of the Ilia. The angle of the screw axes to the implant axis corresponds to the anatomical conditions and is 70°. The locking screw ensures a stable connection of the components. The tips of the locking screws are rounded to facilitate insertion into the nail while the dorsal ends of locking screws are a hexagon. The caps serve to close the instrument connection of the nail. The implants are made from the Titanium alloy (Ti6Al4V) according to ASTM F 136 / ISO 5832-3, with a Type II anodization according to AMS 2488. There are Instruments which are specific to the implantation of the SACRONAIL device. These include, but are not limited to, the Guide Frame, the Guide Bracket, the Fixation Bracket, various Instrument Guides, various dilators and drills, screwdrivers as well as the specific tools for revision of the device.

The SACRONAIL system provides a sustained, stable restoration of dorsal pelvic fractures and sacral fractures through its intraosseous location and its direct, bi-iliac symmetric anchorage. The implant consists of a nail of various lengths from135mm to 194mm with a constant diameter of 8mm and 2 locking screws in different lengths. This variation ensures adaptation to the respective anatomy of the patient. The intersections of the screw axes to the implant axis have a distance of 15mm to the respective end face of the nail. This ensures a solid support on the lateral cortex of the Ilia. The angle of the screw axes to the implant axis corresponds to the anatomical conditions and is 70°. The locking screw ensures a stable connection of the components. The tips of the locking screws are rounded to facilitate insertion into the nail while the dorsal ends of locking screws are a hexagon. The caps serve to close the instrument connection of the nail. The implants are made from the Titanium alloy (Ti6Al4V) according to ASTM F 136 / ISO 5832-3, with a Type II anodization according to AMS 2488. There are Instruments which are specific to the implantation of the SACRONAIL device. These include, but are not limited to, the Guide Frame, the Guide Bracket, the Fixation Bracket, various Instrument Guides, various dilators and drills, screwdrivers as well as the specific tools for revision of the device.

The SACRONAIL system provides a sustained, stable restoration of dorsal pelvic fractures and sacral fractures through its intraosseous location and its direct, bi-iliac symmetric anchorage. The implant consists of a nail of various lengths from135mm to 194mm with a constant diameter of 8mm and 2 locking screws in different lengths. This variation ensures adaptation to the respective anatomy of the patient. The intersections of the screw axes to the implant axis have a distance of 15mm to the respective end face of the nail. This ensures a solid support on the lateral cortex of the Ilia. The angle of the screw axes to the implant axis corresponds to the anatomical conditions and is 70°. The locking screw ensures a stable connection of the components. The tips of the locking screws are rounded to facilitate insertion into the nail while the dorsal ends of locking screws are a hexagon. The caps serve to close the instrument connection of the nail. The implants are made from the Titanium alloy (Ti6Al4V) according to ASTM F 136 / ISO 5832-3, with a Type II anodization according to AMS 2488. There are Instruments which are specific to the implantation of the SACRONAIL device. These include, but are not limited to, the Guide Frame, the Guide Bracket, the Fixation Bracket, various Instrument Guides, various dilators and drills, screwdrivers as well as the specific tools for revision of the device.

The SACRONAIL system provides a sustained, stable restoration of dorsal pelvic fractures and sacral fractures through its intraosseous location and its direct, bi-iliac symmetric anchorage. The implant consists of a nail of various lengths from135mm to 194mm with a constant diameter of 8mm and 2 locking screws in different lengths. This variation ensures adaptation to the respective anatomy of the patient. The intersections of the screw axes to the implant axis have a distance of 15mm to the respective end face of the nail. This ensures a solid support on the lateral cortex of the Ilia. The angle of the screw axes to the implant axis corresponds to the anatomical conditions and is 70°. The locking screw ensures a stable connection of the components. The tips of the locking screws are rounded to facilitate insertion into the nail while the dorsal ends of locking screws are a hexagon. The caps serve to close the instrument connection of the nail. The implants are made from the Titanium alloy (Ti6Al4V) according to ASTM F 136 / ISO 5832-3, with a Type II anodization according to AMS 2488. There are Instruments which are specific to the implantation of the SACRONAIL device. These include, but are not limited to, the Guide Frame, the Guide Bracket, the Fixation Bracket, various Instrument Guides, various dilators and drills, screwdrivers as well as the specific tools for revision of the device.

The SACRONAIL system provides a sustained, stable restoration of dorsal pelvic fractures and sacral fractures through its intraosseous location and its direct, bi-iliac symmetric anchorage. The implant consists of a nail of various lengths from135mm to 194mm with a constant diameter of 8mm and 2 locking screws in different lengths. This variation ensures adaptation to the respective anatomy of the patient. The intersections of the screw axes to the implant axis have a distance of 15mm to the respective end face of the nail. This ensures a solid support on the lateral cortex of the Ilia. The angle of the screw axes to the implant axis corresponds to the anatomical conditions and is 70°. The locking screw ensures a stable connection of the components. The tips of the locking screws are rounded to facilitate insertion into the nail while the dorsal ends of locking screws are a hexagon. The caps serve to close the instrument connection of the nail. The implants are made from the Titanium alloy (Ti6Al4V) according to ASTM F 136 / ISO 5832-3, with a Type II anodization according to AMS 2488. There are Instruments which are specific to the implantation of the SACRONAIL device. These include, but are not limited to, the Guide Frame, the Guide Bracket, the Fixation Bracket, various Instrument Guides, various dilators and drills, screwdrivers as well as the specific tools for revision of the device.