Drill bit Ø1.5 mm, for 2.0 mm screws, quick coupling

Tap Ø2.0 mm, for 2.0 mm screws

Countersink, for 2.0 mm screws

Double drill sleeve Ø1.5/2.0 mm, for 2.0mm screws

Drill bit Ø2.0 mm, for 2.7 mm screws, quick coupling

Tap Ø2.7 mm, for 2.7 mm screws

Double drill sleeve Ø2.0/2.7 mm, for 2.7mm screws

Drill bit Ø2.5mm, for 3.5 mm screws, quick coupling

Tap Ø3.5 mm, for 3.5 mm screws

Holding sleeve, for 2.0/2.7/3.5mm screws

Countersink, for 2.7/3.5 mm screws

Double drill sleeve Ø2.5/3.5 mm, for 3.5mm screws

Drill bit Ø3.2 mm, for 4.5 mm screws up to length 90 mm, quick coupling

Tap Ø4.5 mm, for 4.5 mm screws up to length 90 mm

Holding sleeve, for 4.5mm screws

Countersink, for 4.5mm screws

Double drill sleeve Ø3.2/4.5 mm, for 4.5mm screws

Drill bit Ø3.2 mm, for 4.5 mm screws up to length 70 mm, quick coupling

Tap Ø4.5 mm, for 4.5 mm screws up to length 45 mm

Protection sheath

Sterilization tray, for ActivaScrew™ instruments

T-handle, quick coupling

Small handle, quick coupling

HEX shaft, for 2.0/2.7/3.5 mm screws

HEX shaft, for 4.5mm screws

ActivaScrew™ Cannulated Instrument Set

Drill bit Ø2.7 mm, for 3.5 mm cannulated screws, quick coupling

Tap Ø3.5 mm, for 3.5 mm cannulated screws

Direct driver, for 3.5 mm cannulated screws

Double drill sleeve Ø2.7/3.5 mm, for 3.5 mm cannulated screws

Drill bit Ø3.2 mm, for 4.0 mm cannulated screws, quick coupling

Tap Ø4.0 mm, for 4.0 mm cannulated screws

Drill bit Ø3.5 mm, for 4.5 mm cannulated screws, quick coupling

Tap Ø4.5 mm, for 4.5 mm cannulated screws

Direct driver, for 4.0/4.5 mm cannulated screws

Holding sleeve, for 4.0/4.5mm cannulated screws

Countersink, for cannulated screws

Double drill sleeve Ø4.5/3.5 mm, for 4.0/4.5 mm cannulated screws

Sterilization tray, for ActivaScrew™ Cannulated instruments

Large handle, cannulated, quick coupling

HEX shaft, for 3.5 mm cannulated screws

HEX shaft, for 4.0/4.5 mm cannulated screws

ActivaScrew™ Instrument Set

TorqLoc K-wire Ø0.8 mm, length 150 mm, blunt ends, for 4/5/6 mm interference screw

TorqLoc K-wire Ø0.8 mm, length 300 mm, blunt ends, for 4/5/6 mm interference screw

TorqLoc K-wire Ø1.6 mm, length 240 mm, blunt ends, for 7/8/9/10 mm interference screw

TorqLoc K-wire Ø1.6 mm, length 300 mm, blunt ends, for 7/8/9/10 mm interference screw

TorqLoc Drill bit Ø4.0 mm, cannulated, for 4 mm interference screws, quick coupling

TorqLoc Drill bit Ø5.0 mm, cannulated, for 5 mm interference screws, quick coupling

TorqLoc Notcher for 7/8/9/10 mm interference screw