K-wire Ø0.8mm, length 150 mm, blunt ends, for 4/5/6mm interference screw

K-wire Ø0.8 mm, length 300 mm, for 4/5/6 mm interference screw, blunt ends

K-wire Ø1.6 mm, length 240 mm, blunt ends, for 7/8/9/10 mm interference screw

K-wire Ø1.6 mm, length 300 mm, for 7/8/9/10 mm interference screw, blunt ends

Drill bit Ø4.0 mm, cannulated, for 4 mm interference screws, quick coupling

Drill bit Ø5.0 mm, cannulated, for 5 mm interference screws, quick coupling

Drill bit Ø6.0 mm, cannulated, for 6 mm interference screws, quick coupling

Notcher for 7/8/9/10 mm interference screw

Sterilization tray, for ActivaScrew™ Interference instruments

Torx driver, for 7/8/9/10 mm interference screws

Torx shaft for 4/5/6 mm interference screw with quick coupling

ActivaScrew™ Interference Instrument Set

Drill bit Ø1.5 mm, for 1.5 mm pins/nails, quick coupling

Drill bit Ø2.0 mm, for 2.0 mm pins/nails, quick coupling

Drill bit Ø2.7 mm, for 2.7 mm pins/nails, quick coupling

Drill bit Ø3.2 mm, for Ø3.2 mm pins/nails, with quick coupling

Instrument set, for ActivaPin™

DISPOSABLE, MANUALLY OPERATED BONE MILL THAT SAVES TIME, PRODUCES A BETTER AUTO GRAFT PASTE, AND ELIMINATES CLEANING/STERILIZING WORK IN HOSPITAL SETTING.

PLATFORM (RE-USABLE) TO WHICH 2 ORDOCK CUPS (Not INCLUDED) ARE ATTACHED TO HOLD INSTRUMENTS DURING A SURGICAL PROCEDURE, NEEDS TO BE STERILIZED PRIOR TO USE (SEE INSTRUCTIONS FOR AUTOCLAVE)

2 STERILE CUPS THAT ATTACH TO A PLATFORM (NOT INCLUDED) TO HOLD INSTRUMENTS DURING A SURGICAL PROCEDURE

A SINGLE, STERILE CUP THAT ATTACHES TO A PLATFORM (NOT INCLUDED) TO HOLD INSTRUMENTS DURING A SURGICAL PROCEDURE. THIS CUP IS SOLD SINGLY TO ACCOMMODATE HOSPITALS WHO WISH TO BUY IN BULK. HOWEVER TWO CUPS ARE REQUIRED TO BE ATTACHED TO THE PLATFORM WHEN IT IS BEING USED.

NuGraf Cotton Sizer, 5.5mm

NuGraf Cotton Sizer, 6.5mm

NuGraf Cotton Sizer, 7.5mm

NuGraf Cotton Sizer, 8.5mm

Carbon Fiber Facet Locator

Stainless Steel Facet Locator

Stainless Steel Facet Locator - Cannulated

Drill Guide

Drill Tube

4.5mm NuFix Drill Bit

4.5mm Drill Bit - Cannulated

Facet Sound

NuFix Inserter

Carbon Fiber Handle

5.0mm Drill Bit

Guide Pins

Drill Bushing Two Holes Rev. 01

Drill Bushing Center Hole

Drill Bushing Center Hole Rev. 01

Drill Bushing Two Holes

NuFix II Drill Guide

NuFix II Drill Guide Rev. 01

NuFix II Drill, 5.0mm Rev. 01

NuFix II Inserter

NuFix II Inserter Rev. 01

NuFix II Non-Cannulated Blade

NuFix II Cannulated Blade

NuFix II Cannulated Blade Rev. 01

Extension Assy, 4"