MODULIFT VBR SZ.S 12X14MM 21-27MM 0°

MODULIFT VBR SZ.S 12X14MM 25-35MM 0°

MODULIFT VBR SZ.S 12X14MM 30-45MM 0°

MODULIFT VBR SZ.S 12X14MM 19-23MM 5°

MODULIFT VBR SZ.S 12X14MM 21-27MM 5°

MODULIFT VBR SZ.M FOOTPLATE D21MM 6°

MODULIFT VBR SZ.L FOOTPLATE D28MM 6°

MODULIFT VBR SZ.L FOOTPLATE D28MM 9°

MODULIFT VBR SZ.L FOOTPLATE D28MM 15°

MODULIFT VBR SZ.L FOOTPLATE 28X32MM 0°

MODULIFT VBR SZ.L FOOTPLATE 28X32MM 3°

MODULIFT VBR SZ.L FOOTPLATE 28X32MM 6°

MODULIFT VBR SZ.M 18.5-23.5MM 0°

MODULIFT VBR SZ.M 18.5-23.5MM LAT.6°

MODULIFT VBR SZ.M 18.5-23.5MM POST.6°KYP

MODULIFT VBR SZ.M 18.5-23.5MM LAT.9°

MODULIFT VBR SZ.M 18.5-23.5MM POST.9°KYP

MODULIFT VBR SZ.L FOOTPLATE 28X32MM 9°

MODULIFT VBR SZ.L FOOTPLATE 28X32MM 15°

MODULIFT VBR SZ.L 23.5-30.5MM 0°

MODULIFT VBR SZ.L 23.5-30.5MM LAT.6°

MODULIFT VBR SZ.L 23.5-30.5MM POST.6°KYP

MODULIFT VBR SZ.L 23.5-30.5MM LAT.9°

MODULIFT VBR SZ.L 23.5-30.5MM POST.9°KYP

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.

The basic shape of the NUBIC and RABEA devices is a rectangular frame. The upper and lower aspects of the implant are open with surface spikes which assist in the positive anchorage and seating between the superior and inferior vertebral bodies. The device is available in a variety of sizes enabling the surgeon to choose the size best suited to the individual pathology and anantomical condition. A connecting screw is available which permits attachment of the NUBIC (without strut) to the SIGNUS TOSCA II anterior cervical plate if the surgeon so chooses.