ANGLED T8 SCREWDRIVER ZERO-P WITH RIGHT HANDLE

ANGLED T8 SCREWDRIVER ZERO-P WITH LEFT HANDLE

UNIVERSAL JOINT ANGLED DRIVE HANDLE

2.0MM DRILL BIT WITH 12MM STOP UNIVERSAL JOINT

2.0MM DRILL BIT WITH 14MM STOP UNIVERSAL JOINT

2.0MM DRILL BIT WITH 16MM STOP UNIVERSAL JOINT

ANGLED DRILL GUIDE WITH HANDLE ZERO-P

2.0MM ANGLED AWL BEVEL TIP

2.0MM ANGLED AWL DOUBLE BEVEL TIP

ANGLED DRILL GUIDE WITH HANDLE ZERO-P VA

2.5MM ANGLED AWL BEVEL TIP

2.5MM ANGLED AWL DOUBLE BEVEL TIP

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).

The CYGNUS-C Standalone ACIF System cages are designed for restoring the height of the intervertebral space after resection of the disc while also providing biomechanical stability with the addition on an integrated plate. This integrated plate allows for theuser to bypass using an additional plate as seen with traditional ACIF spacers. The CYGNUS-C Standalone ACIF System devices consist of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The Subject device also contains supplementary fixation screw. The intervertebral body fusion devices are made of hydroxyapatite polyether-ether-ketone (HA PEEK OPTIMA LT1) body with a titanium alloy (Ti-6Al-4V) plate and X-ray (radioopaque) markers made of tantalum. The supplementary screws are made up of titanium alloy (Ti-6Al-4V).