830 NM GANTRY FINAL WITH NEW ROTOR - MDR CE

StarGuide NM GANTRY MDR FINAL

MyoSPECT GANTRY

MyoSPECT ES GANTRY

MyoSPECT MDR GANTRY

MyoSPECT ES MDR GANTRY

MyoSPECT ES to MyoSPECT Upgrade kit

D630 to D670 DR NM GANTRY UPGRADE KIT

StarGuide SW and Labels Upgrade

870 DR NM GANTRY FINAL WITH NEW ROTOR - MDR CE

UFC GANTRY FINAL ASSEMBLY

STARGATE NM GANTRY FINAL

OMNI GANTRY 24-30 INCL. ELECTRONICS ASSY

OMNI GANTRY 24-30 INCL. ELECTRONICS ASSY

OMNI GANTRY 24-30 INCL. ELECTRONICS ASSY - WSO

OMNI GANTRY ELECTRONICS ASSY, MEA

PET DMI Gen2 Image System Asm, No Detectors Installed, Common Weld Gantry, Manufacturing Make

CareMiBrain is a Positron Emission Tomography system for brain imaging in neurological and oncological applications. It has two main parts: the detection and acquisition system and the Control Unit.

Affinity is a software application for nuclear medicine and radiology. Based on user input, Affinity processes, displays and analyzes nuclear medicine and radiology imaging data and presents the results to the user. The results can be stored for future analysis. The software application can be configured based on user needs. The investigation of physiological or pathological states using measurement and analysis functionality provided by Affinity is not intended to replace visual assessment. The information obtained from viewing and/or performing quantitative analysis on the images is used, in conjunction with other patient related data, to inform clinical management.

Leg Extension with Cutout

Lithotomy AirShuttle Leg Extension B with Cut Out

Lithotomy AirShuttle Leg Extension D with Cut Out

Applicator Clamp Holder, Rail Mounted

Applicator Clamp Bracket, Post Mounted

The Radialis PET Imager (or Radialis PET Camera) is a high spatial resolution, small field-of-view PET imaging camera specifically developed for close-range, organ-targeted (i.e., limited field) imaging. The Radialis PET Camera is a partial-ring planar PET camera, equipped with lutetium-containing gamma-ray detectors, which collect gamma rays emitted by injected positron-emitting radiopharmaceuticals, and generates images corresponding to the relative concentrations of these radiopharmaceuticals in the body. The Radialis PET Camera is designed to collect gamma rays emitted by the injected radiopharmaceutical in a patient’s body part with high efficiency.

Single Photon Emission Computed Tomography System combined with a Computed Tomography (CT) system for x-ray imaging.

Single Photon Emission Computed Tomography System combined with a Computed Tomography (CT) system for x-ray imaging.

Single Photon Emission Computed Tomography System combined with a Computed Tomography (CT) system for x-ray imaging.

Single Photon Emission Computed Tomography System combined with a Computed Tomography (CT) system for x-ray imaging.

Single Photon Emission Computed Tomography System WITH ‘TOTAL BODY’ ACQUISITION

Single Photon Emission Computed Tomography System WITH ‘TOTAL BODY’ ACQUISITION

The Emory Cardiac Toolbox™ 4.0 is used to display gated wall motion and for quantifying parameters of left-ventricular perfusion and function from gated SPECT & PET myocardial perfusion studies and for the evaluation of dynamic PET studies. These parameters are: perfusion, ejection fraction, end-diastolic volume, end-systolic volume, myocardial mass, transient ischemic dilatation (TID), analysis of coronary blood flow and coronary flow reserve, and assessment of cardiac mechanic dyssynchrony. In addition, the program offers the capability of providing the following diagnostic information: computer assisted visual scoring, prognostic information, and expert system image interpretation. The program can also be used for the 3D alignment of coronary artery models from CT coronary angiography onto the left ventricular 3D epicardial surface and for generation of the short axis, vertical, and horizontal long axis tomograms from the SPECT raw data using either filtered backprojection (FBP) or iterative reconstruction (MLEM/OSEM). The Emory Cardiac Toolbox can be used with any of the following Myocardial SPECT Protocols: Same Day and Two Day Sestamibi, Dual-Isotope (Tc-99m/Tl-201), Tetrofosmin, and Thallium, Rubidium-82, Rubidium-82 with CT-based attenuation correction, N-13-ammonia, FDG protocols, and user defined normal databases. This program was developed to run in the .NET operating system environment which can be executed on any PC, any nuclear medicine computer system, or through a web browser. In addition, the program can be used for the decision support in interpretation and automatic structured reporting of the study. The program processes the studies automatically, however, user verification of output is required and manual processing capability is provided.

The Emory Cardiac Toolbox™ 4.0 is used to display gated wall motion and for quantifying parameters of left-ventricular perfusion and function from gated SPECT & PET myocardial perfusion studies and for the evaluation of dynamic PET studies. These parameters are: perfusion, ejection fraction, end-diastolic volume, end-systolic volume, myocardial mass, transient ischemic dilatation (TID), analysis of coronary blood flow and coronary flow reserve, and assessment of cardiac mechanic dyssynchrony. In addition, the program offers the capability of providing the following diagnostic information: computer assisted visual scoring, prognostic information, and expert system image interpretation. The program can also be used for the 3D alignment of coronary artery models from CT coronary angiography onto the left ventricular 3D epicardial surface and for generation of the short axis, vertical, and horizontal long axis tomograms from the SPECT raw data using either filtered backprojection (FBP) or iterative reconstruction (MLEM/OSEM). The Emory Cardiac Toolbox can be used with any of the following Myocardial SPECT Protocols: Same Day and Two Day Sestamibi, Dual-Isotope (Tc-99m/Tl-201), Tetrofosmin, and Thallium, Rubidium-82, Rubidium-82 with CT-based attenuation correction, N-13-ammonia, FDG protocols, and user defined normal databases. This program was developed to run in the .NET operating system environment which can be executed on any PC, any nuclear medicine computer system, or through a web browser. In addition, the program can be used for the decision support in interpretation and automatic structured reporting of the study. The program processes the studies automatically, however, user verification of output is required and manual processing capability is provided.

The Emory Cardiac Toolbox™ 4.0 is used to display gated wall motion and for quantifying parameters of left-ventricular perfusion and function from gated SPECT & PET myocardial perfusion studies and for the evaluation of dynamic PET studies. These parameters are: perfusion, ejection fraction, end-diastolic volume, end-systolic volume, myocardial mass, transient ischemic dilatation (TID), analysis of coronary blood flow and coronary flow reserve, and assessment of cardiac mechanic dyssynchrony. In addition, the program offers the capability of providing the following diagnostic information: computer assisted visual scoring, prognostic information, and expert system image interpretation. The program can also be used for the 3D alignment of coronary artery models from CT coronary angiography onto the left ventricular 3D epicardial surface and for generation of the short axis, vertical, and horizontal long axis tomograms from the SPECT raw data using either filtered backprojection (FBP) or iterative reconstruction (MLEM/OSEM). The Emory Cardiac Toolbox can be used with any of the following Myocardial SPECT Protocols: Same Day and Two Day Sestamibi, Dual-Isotope (Tc-99m/Tl-201), Tetrofosmin, and Thallium, Rubidium-82, Rubidium-82 with CT-based attenuation correction, N-13-ammonia, FDG protocols, and user defined normal databases. This program was developed to run in the .NET operating system environment which can be executed on any PC, any nuclear medicine computer system, or through a web browser. In addition, the program can be used for the decision support in interpretation and automatic structured reporting of the study. The program processes the studies automatically, however, user verification of output is required and manual processing capability is provided.

The uMI 550 PET/CT is a diagnostic imaging system that combines two existing imaging modalities - PET and CT. This system is intended to be operated by qualified healthcare professionals.

The uMI 550 PET/CT is a diagnostic imaging system that combines two existing imaging modalities - PET and CT. This system is intended to be operated by qualified healthcare professionals.