The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

The Niti-S Esophageal Stent intended for use in esophageal strictures caused by intrinsic and/or extrinsic malignant tumors. The Niti-S Esophageal Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible, expandable tubular device woven from one or two continuous pieces of Nitinol wire to avoid sharp edges. At each end, the stent has a larger diameter resulting in a “dumbbell” shaped stent when viewed from an axial cross-section. The Niti-S Esophageal Stent is provided in three configurations: the Uncovered type, the Full Covered type and the Both Bare type. The Uncovered-type stent is available in two diameters (6, 8mm), and five lengths (60, 80, 100, 120, and 150mm). The Full Covered-type and the Both Bare-type stents are available in three diameters (6, 8, 10mm), and five lengths (60, 80, 100, 120, and 150mm). It has 10 radiopaque markers. This device also includes a disposable introducer. Upon deployment, the stent imparts an outward radial force on the luminal surface esophagus to establish patency. The introducer system consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The usable lengths of the introducer is 70cm. Other information: The shelf-life of Niti-S Esophageal Stent is 3 years.The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.038 inch (0.97mm). Do not use if package is damaged. Do not reuse or resterilize.

Fully Covered Esophageal Stent System

Fully Covered Esophageal Stent System

Partially Covered Esophageal Stent System

Fully Covered Esophageal Stent System

Partially Covered Esophageal Stent System

Fully Covered Esophageal Stent System

Partially Covered Esophageal Stent System