Bar implant analog for bar abutments Ø 3.3/3.8/4.3 mm

Bar implant analog for bar abutments Ø 5.0/6.0 mm

Plaster cutter, for univ. holder, incl. guide pin Ø 3.3 mm

Plaster cutter, for univ. holder, incl. guide pinØ 3.8 mm

Plaster cutter, for univ. holder, incl. guide pin Ø 4.3 mm

Plaster cutter, for univ. holder, incl. guide pin Ø 5.0 mm

Plaster cutter, for univ. holder, incl. guide pin Ø 6.0 mm

Universal holder incl. abutment collects Ø 3.3/3.8/4.3/5.0/6.0 mm

Universal holder

Abutment collect for universal holder Ø 3.3 mm

Abutment collect for universal holder Ø 3.8 mm

Abutment collect for universal holder, Ø 4.3 mm

Abutment collect for universal holder Ø 5.0 mm

Abutment collect for universal holder Ø 6.0 mm

Reworking reamer, for base for bar abutment, plane surface/cone seat, burn-out Ø 3.3/3.8/4.3 mm

Reworking reamer, for base for bar abutment, plane surface/cone seat, burn-out Ø 5.0/6.0 mm

Reworking reamer, for base for bar abutment, screw seat, burn-out Ø 3.3/3.8/4.3 mm

Reworking reamer, for base for bar abutment, screw seat, burn-out Ø 5.0/6.0 mm

Collect for zirconium oxide sleeve (PEEK) for universal holder Ø 3.3/3.8/4.3 mm

Collect for zirconium oxide sleeve (PEEK) for universal holder Ø 5.0/6.0 mm

Guide Template drill Ø 3.3 mm,

Guide Template drill Ø 3.8/4.3 mm

Template drill CAMLOG® Guide Ø 3.8/4.3 mm

Guide Setting tool for Guiding sleeve Ø 3.3 mm

Guide Setting tool for Guiding sleeve Ø 3.8/4.3 mm

Guide Setting tool PL for Guiding sleeve, d 3.3 mm

Guide Setting tool PL for Guiding sleeve, d 3.8/4.3 mm

Guide Setting tool PL for Guiding Sleeve, d 5.0 mm

Guide Template drill d 3.3 mm

Guide Template drill d 3.8/4.3 mm

Guide Guiding sleeve, height 3 mm, Titanium Ø 3.3 mm

Guide Guiding sleeve, height 3 mm, Titanium Ø 3.8 mm

Guide Guiding sleeve, height 3 mm, Titanium Ø 4.3 mm

Guide Template drill d 5.0 mm

Guide Guiding Sleeve, PL, d 5.0 mm, 2 units

Guide Guiding Sleeve, PL, d 5.0 mm, 50 units

CAMLOG® Lab screw reduced head M1.6

CAMLOG® Lab screw reduced head M2.0

CAMLOG® Lab screw, hex, for CAMLOG® Vario SR abutment, 20deg/30deg angled Ø 3.8/4.3 mm, thread M 1.6

CAMLOG® Lab screw, hex, for CAMLOG® Vario SR abutment, 20deg/30deg angled Ø 5.0/6.0 mm, thread M 2.0.

CAMLOG® Vario SR Lab screw Ø 3.8/4.3 mm, hex, thread M 1.6

CAMLOG® Vario SR Lab screw Ø 5.0/6.0 mm, hex, thread M 2.0

CAMLOG® Bonding aid Ø 3.3/3.8/4.3 mm

CAMLOG® Bonding aid Ø 5.0/6.0 mm

Lab prosthetic screw M1.6

Lab prosthetic screw M2.0

Adapter, ISO shaft for angled hand piece

Cleaning needle for drills with internal irrigation

Cleaning cannula for drills with internal irrigation

Spiral drill reverse action for CAMLOG® and CONELOG® Re-Set, Ø 0.82 mm,