Interface Cable to interface Transducer to Monitor. It has a 8-pin monitor connector and the cable length is 150"

Interface Cable of length 150" with a rectangular shape, 11-pins monitor connector.

Interface Cable of length 100" with a rectangular shape, 11-pins monitor connector.

Interface Cable of length 150" with a round shape, 10-pins monitor connector.

Interface Cable to interface Transducer to Monitor. It has no monitor connector and the cable length is 150"

Interface Cable of length 150" with a round shape, 6-pins monitor connector.

Interface Cable of length 150" with a round shape, 5-pins monitor connector.

Interface Cable of length 150" with a round shape, 10-pins monitor connector.

Interface Cable of length 150" with a round shape, 12-pins monitor connector.

Interface Cable of length 150" with a round shape, 5-pins monitor connector.

Interface Cable of length 150" with a round shape, 6-pins monitor connector.

Interface Cable of length 150" with a round shape, 5-pins monitor connector.

Interface Cable of length 150" with a round shape, 5-pins monitor connector.

Interface Cable of length 150" with a round shape, 12-pins monitor connector.

Interface cable with cable length 425", without monitor connector

Interface Cable of length 150" with a round shape, 6-pins monitor connector.

Interface Cable of length 150" with a round shape, 5-pins monitor connector.

Interface Cable of length 150" with a round shape, 7-pins monitor connector.

Interface Cable of length 150" with a round shape, 8-pins monitor connector.

Interface Cable of length 150" with a round shape, 8-pins monitor connector.

Interface Cable of length 150" with a round shape, 8-pins monitor connector.

Interface Cable of length 150" with a round shape, 4-pins monitor connector.

Interface Cable of length 150" with a round shape, 6-pins monitor connector.

An adaptor for 2 transducers. Only applicable to Siemens monitor.

Interface Cable of length 85" with a round shape, 6-pins monitor connector.

Interface Cable of length 150" with a round shape, 14-pins monitor connector.

Interface Cable of length 150" with a round shape, 6-pins monitor connector.

Interface Cable of length 150" with a round shape, 12-pins monitor connector.

An adaptor for 2 transducers. Only applicable to Siemens monitor.

Interface cable with cable length 7", without monitor connector

Interface cable of 18" cable length with a round shape, 8-pins monitor connector.

Interface cable of 150" cable length with a round shape, 5-pins monitor connector.

Interface cable of 150" cable length with a round shape, 4-pins monitor connector.

Interface cable of 84" cable length with a round shape, 8-pins monitor connector.

Interface cable of 60" cable length with a round shape, 10-pins monitor connector.

Interface cable of 60" cable length with a round shape, 4-pins monitor connector.

Interface cable of 150" cable length with a round shape, 8-pins monitor connector.

Interface cable of 150" cable length with a round shape, 8-pins monitor connector.

Interface cable of 84" cable length with a round shape, 8-pins monitor connector.

A separate 20 drops, 60" tube Adset and a 6" pressure tube connected to a SP5045 device via 2x 3-way stopcocks. A 10cc control syringe with male luer taper is also incuded in the Kits Set.

4x 3cc transducers, each connects to a port of a 5-Gang Multiport. The middle port connects directly with a 20 drops, 60" Adset. The other 4 ports, each connects with a 6" Pressure Tubing with clamp. The 4 x 3cc transducers are individually connected to these tubings. The zeroing stopcock of transducer in port # 1 connects with a 12" Pressure tubing, with red tape for identification, It has a 60" &12" Pressure tubings connect to it via 2 separate 3-way red stopcocks. Port #2, transducer is connected with a 24" Pressure tubing identified with Yellow tape and a 3-Way yellow stopcock. Port # 4, with its transducer connects to a Blue taped 24" pressure tubing and a 3-Way blue stopcock. Port # 5 connects with a transducer.

A single 3cc transducer connected to a 20 drops, 60" tube AdSet. patient line is connected to a 12" Pressure Tube and a 72" Pressure tube via 3-way stopcock. It also includes a separately packed 3xmale & 1x Female fittings protective caps and a Label Set.

A single 3cc transducer connected to a 20 drops, 60" tube Adset. The patient line is connected with a 48" pressure tube and a 12" pressure tube via 3-way White stopcocks.

A single line 3cc transducer connected to a 20 drops, 60" tube Adset. The other end of the transducer is connected to a 12" pressure tubing via 3-way red stopcock.

A single 3cc transducer connected to a 20 drops, 60" Adset. The other side connected with a 48" Pressure tubing and a 3-way White stopcock

A 30 cc transducer connected with a 48" pressure tubing and a 3-Way White stopcock. It has a separately packed 2-xmale protective caps.

a 2-way Adset of tube lengths 60" with 1 line connected to a 3cc transducer and pressure tubing of lengths 72" and 12" and stopcocks. The other line is left open for other connection. It includes a separately packed 3xmale, 1x Female protective caps and a Colour Set

A single line 3cc transducer connected to a 72" Pressure tube and a 12" tube with stopcocks. It includes a separately packed 3x male & 1x female protective caps and a Colour Set.

A 3-way white stopcock connects to a 12" presure tubing. It includes a separately packed 2x male protective caps.

Single non-flushing transducer with stopcocks at either ends