Integra® Ti6®The TS-series drill guide is used for precision and accuracy when drilling 2.0 and 2.5mm screws.

Integra® Ti6®The TS-series drill guide is used for precision and accuracy when drilling 3.0 and 4.0mm screws.

Integra® Ti6®The Ti6 CounterSink is used to add space or clearance for the head of a TS-Series 2.0 or 2.5mm screw.

Integra® Ti6®The Ti6 CounterSink is used to add space or clearance for the head of a TS-Series 2.0 or 2.5mm screw with AO.

Integra® Ti6®The Ti6 CounterSink is used to add space or clearance for the head of a TS-Series 3.0 or 4.0mm screw.

Integra® Ti6®The Ti6 CounterSink is used to add space or clearance for the head of a TS-Series 3.0 or 4.0mm screw with AO.

Integra® Ti6®The Ti6 cannulated CounterSink is used to add space or clearance for the head of a TC-Series 2.0 or 2.5mm screw with AO.

Integra® Ti6®The Ti6 cannulated CounterSink is used to add space or clearance for the head of a TC-Series 3.0 or 4.0mm screw.

Integra® Ti6®The cannulated driver shaft is used to create holes in conjunction with the Ti6 TC-series 2.0/2.5mm screws.

Integra® Ti6®The cannulated driver shaft is used to create holes in conjunction with the Ti6 TC-series 3.0/4.0mm screws.

Integra® Ti6®The combination cannulated Countersink and Depth Gauge allows for precise measurement. This tool is used with the TC-series 2.0/2.5mm screws.

Integra® Ti6®The combination cannulated Countersink and Depth Gauge allows for precise measurement. This tool is used with the TC-series 3.0/4.0mm screws.

Integra® Ti6®The cannulated drill is used with the TC-series 2.0/2.5 mm screws.

Integra® Ti6®The cannulated overdrill is used with the TC-series 3.0/4.0 mm screws.

Integra® Ti6®The cannulated driver shaft is used to create holes in conjunction with the Ti6 TH-series screws.

Integra® Ti6®The TH-Series cannulated depth gauge is a tool used to measure the depth of a drilled hole.

Integra® Ti6®The cannulated relief drill is used with the TH-series screws.

Integra® Ti6®The removal driver shaft is used in conjunction with the Ti6 TH-series screws.

Integra® Ti6®The 3-prong driver shaft is used to create holes in conjunction with the Ti6 TQ-series quick snap screws.

Surgical Instruments Slotted Mallet

Surgical Instruments Driver Handle w/SM AO

Integra®Surgical InstrumentsThe T-handle is provided with a large AO adaptor.

Integra®Surgical InstrumentsThe torque limiter is used during assembly and implantation of devices.

Titan™ Total Shoulder SystemThe head cutting depth gauge can be used to assess the cutting plane.

Titan™ Total Shoulder SystemThe guide pin assists with the placement of implants in the total shoulder system.

Movement® Great Toe SystemThe guide pin assists with the placement of implants in the great toe system.

Integra®Surgical InstrumentsThe Guide Pin is used in conjunction with the cup and cone reamers.

Titan™ Total Shoulder SystemMini Glenoid Guide Pin Guide Round

Titan™ Total Shoulder SystemMini Glenoid Pin Guide Oval Sz. Small

Titan™ Total Shoulder SystemMini Glenoid Pin Guide Oval Sz. Large

Construct® Ankle Fusion Plate System The Smith Peterson straight osteotome is used for cutting bone.

Construct® Ankle Fusion Plate System The AO to Trinkle adaptor is used for conversion.

Construct® Ankle Fusion Plate System The forceps are used for screw holding in the Construct Ankle Fusion Plating System.

Construct® Ankle Fusion Plate System The targeting base knob is used in the Construct Ankle Fusion Plate System.

Construct® Ankle Fusion Plate System The left guide pin targeting base is used in the Construct Ankle Fusion Plate System.

Construct® Ankle Fusion Plate System The right guide pin targeting base is used in the Construct Ankle Fusion Plate System.

Construct® Ankle Fusion Plate System The guide pin targeting sleeve is attached to the guide pin targeting base in the Construct Ankle Fusion Plate System.

Titan™ Reverse Shoulder SystemThe glenoid wire guide is concentric with a lip and is used to determine proper guide pin positioning.

Titan™ Reverse Shoulder SystemThe glenoid wire guide is eccentric with a lip and is used to determine proper guide pin positioning.

Titan™ Reverse Shoulder SystemThe glenoid wire guide is used to determine proper guide pin positioning.

Titan™ Total Shoulder SystemThe stem trial handle is used to assist with the placement of the stem trial.

Titan™ Total Shoulder SystemThe anti-rotation peg holder is used to assist with the placement of the anti-rotation peg in the Titan Total Shoulder system.

Titan™ Total Shoulder SystemThe glenoid drill shaft is used with the total shoulder system.

Titan™ Reverse Shoulder SystemThe handle is used to remove glenospheres.

Total Shoulder System Glenoid Holder

Titan™ Total Shoulder SystemThe humeral depth stop is used for precise measurement.

Integra® BioMotion® Cannulated Hemi SystemBioMotion Slide BroachThe BioMotion Slide Broach is used to prepare a cavity that provides a press fit for the implant.

Integra® BioMotion® Cannulated Hemi SystemThe slide hammer is used to assist with implant placement into the bone.

Integra® BioMotion® Cannulated Hemi SystemThe BioMotion hemi rasp is a coarse file to remove bone.

Integra® BioMotion® Cannulated Hemi SystemThe BioMotion Hemi Sterilization Tray is designed to contain, secure, and protect system devices.