Integra® Surgical InstrumentsThe angled drill shaft is used to create holes when inserted into a driver handle.

Integra® Total Foot SystemThe drill bit is a cutting tool used to create cylindrical holes. This drill bit is made for a Stryker fitting.

Integra® Total Foot SystemThe drill bit is a cutting tool used to create cylindrical holes. This drill bit has an AO fitting.

Integra® Total Foot SystemThe forceps are used to hold plates and screws in conjunction with the Integra Total Foot System.

Integra® Total Foot SystemThe drill guide is used for precision and accuracy when drilling.

Integra® Total Foot SystemThe Bending Pliers are used to bend pre-countored plates to match specific patient anatomy.

Integra® Total Foot SystemThe Tarsalis Bending Iron is used to bend pre-countored tarsalis plates to match specific patient anatomy.

Integra® Total Foot SystemThe screwdriver is a tool for turning screws.

Integra® Humeral Resurfacing ArthroplastyK-Wire is used for temporary fixation.

Integra® Humeral Resurfacing ArthroplastyPartially Threaded K-Wire is used for temporary fixation.

Integra® Humeral Resurfacing ArthroplastyPartially Threaded K-Wire is used for temporary fixation.

Integra® Total Foot SystemThe Synthes Style Twist Drill is a drill with a twisted body and is used for making holes.

Integra® Total Foot SystemThe Synthes Style Twist Drill is a drill with a twisted body and is used for making holes.

Integra® Total Foot SystemThe Synthes Style Twist Drill is a drill with a twisted body and is used for making holes.

Integra® Surgical InstrumentsThe pin puller is used to slide over objects that have been drilled into the bone, such as k-wires, grasped and pulled out of the bone.

CAPTURE™ Cannulated Screw SystemThe combination Countersink and Depth Gauge allows for precise measurement. This tool is used with the DS-series screws.

CAPTURE™ Cannulated Screw SystemThe ratchet handle is used in conjunction with the Digital Fusion screws.

CAPTURE™ Cannulated Screw SystemThe cannulated driver is used in conjunction with the DS-series screws.

Titan™ Total Shoulder SystemTRIAL ADAPTOR TSSThe Trial Adaptor is used to evaluate the best fit adaptor in the Titan Modular Total Shoulder System.

Titan™ Total Shoulder SystemThe stem adaptor is used to evaluate the best fit adaptor in the Titan Total Shoulder system.

Humeral Resurfacing Arthroplasty

Humeral Resurfacing Arthroplasty

Humeral Resurfacing Arthroplasty

Titan™ Total Shoulder SystemThe Taper Adapter allows for preparation and retraction of the humerus for glenoid preparation.

Titan™ Total Shoulder SystemThe Taper Adapter allows for preparation and retraction of the humerus for glenoid preparation.

CAPTURE™ High Torque Screw SystemThe quick connect adaptor assists with any connection conversions.

CAPTURE™ Cannulated Screw SystemThe screw removal instrument is used in conjunction with the Capture Cannulated Screw System.

CAPTURE™ Cannulated Screw SystemThe overdrill is used with the TC-series 2.0/2.5 mm screws.

CAPTURE™ Cannulated Screw SystemThe overdrill is used with the TC-series 3.0/4.0 mm screws.

CAPTURE™ Cannulated Screw SystemThe Swivel Driver Handle offers a precise delicate feel and is useful for inserting small AQ-Series screws.

CAPTURE™ Cannulated Screw SystemThe ratchet handle is used in conjunction with the Capture Cannulated Screw System.

CAPTURE™ Cannulated Screw SystemThe forceps are used for screw pickup in the Capture Cannulated Screw System.

CAPTURE™ High Torque Screw SystemThe guide wire is used as a guide for placement or insertion of a device. The plain guide wires have a trocar tip.

CAPTURE™ Cannulated Screw SystemThe driver is used in conjunction with the TC-series 2.0/2.5mm screws.

CAPTURE™ Cannulated Screw SystemThe driver is used in conjunction with the TC-series 3.0/4.0mm screws.

CAPTURE™ High Torque Screw SystemThe combination Countersink and Depth Gauge allows for precise measurement. This tool is used with 2.5 & 3.0mm screws.

CAPTURE™ Cannulated Screw SystemThe combination Countersink and Depth Gauge allows for precise measurement. This tool is used with the TC-series 2.0/2.5mm screws.

CAPTURE™ Cannulated Screw SystemThe combination Countersink and Depth Gauge allows for precise measurement. This tool is used with the TC-series 3.0/4.0mm screws.

CAPTURE™ High Torque Screw SystemThe guide wire is used as a guide for placement or insertion of a device. The plain guide wires have a trocar tip.

CAPTURE™ High Torque Screw SystemThe guide wire is used as a guide for placement or insertion of a device. The plain guide wires have a trocar tip.

CAPTURE™ High Torque Screw SystemThe guide wire is used as a guide for placement or insertion of a device. The plain guide wires have a trocar tip.

CAPTURE™ High Torque Screw SystemThe cannula cleaning stylet is used to clean all cannulated instruments. This instrument is used with 4.0 and 5.0 mm instruments.

CAPTURE™ Cannulated Screw SystemThe cannulated driver is used in conjunction with the TH-series screws.

CAPTURE™ Cannulated Screw SystemThe TH cannulated depth gauge is used to measure the depth of a drilled hole.

CAPTURE™ Cannulated Screw SystemThe TH cannulated relief drill is used to create a pilot hole for the screw.

CAPTURE™ Cannulated Screw SystemThe solid removal driver is used in conjunction with the TH-series screws.

CAPTURE™ Cannulated Screw SystemThe TQ 3 Prong Driver Shaft is cannulated to accept the QuickSnap screw shank. It has 3 prongs that grasp the slots of both the screw shank as well as the screw head.

CAPTURE™ High Torque Screw SystemThe combination Countersink and Depth Gauge allows for precise measurement. This tool is used with 4.0/5.0mm screws.

CAPTURE™ High Torque Screw SystemThe cannula cleaning stylet is used to clean all cannulated instruments. This instrument is used with 2.5 and 3.0 mm instruments.

CAPTURE™ High Torque Screw SystemThe combination Countersink and Depth Gauge allows for precise measurement.