The Integra External Fixation System k-wires are manufactured from stainless steel and are secured to the bone segment. They are intended for the treatment of bone conditions including leg lengthening, osteotomies, arthrodesis, fracture fixation, and other bone conditions amenable to treatment by use of external fixation.

The Integra External Fixation System k-wires are manufactured from stainless steel and are secured to the bone segment. They are intended for the treatment of bone conditions including leg lengthening, osteotomies, arthrodesis, fracture fixation, and other bone conditions amenable to treatment by use of external fixation. The olive wire is designed to include an oval area on the wire for alignment to a washer.

The Integra External Fixation System k-wires are manufactured from stainless steel and are secured to the bone segment. They are intended for the treatment of bone conditions including leg lengthening, osteotomies, arthrodesis, fracture fixation, and other bone conditions amenable to treatment by use of external fixation. The olive wire is designed to include an oval area on the wire for alignment to a washer.

The k-wire washer is used in conjunction with the Integra External Fixation System. It is made from stainless steel.

The Integra External Fixation System half pin bone screws are manufactured from stainless steel and are secured to the bone segment. The half pins come with both self-tapping and self-drilling design features. They are intended for the treatment of bone conditions including leg lengthening, osteotomies, arthrodesis, fracture fixation, and other bone conditions amenable to treatment by use of external fixation.

The Integra External Fixation System half pin bone screws are manufactured from stainless steel and are secured to the bone segment. The half pins come with both self-tapping and self-drilling design features. They are intended for the treatment of bone conditions including leg lengthening, osteotomies, arthrodesis, fracture fixation, and other bone conditions amenable to treatment by use of external fixation.

The Integra External Fixation System half pin bone screws are manufactured from stainless steel and are secured to the bone segment. The half pins come with both self-tapping and self-drilling design features. They are intended for the treatment of bone conditions including leg lengthening, osteotomies, arthrodesis, fracture fixation, and other bone conditions amenable to treatment by use of external fixation.

The Integra External Fixation System half pin bone screws are manufactured from stainless steel and are secured to the bone segment. The half pins come with both self-tapping and self-drilling design features. They are intended for the treatment of bone conditions including leg lengthening, osteotomies, arthrodesis, fracture fixation, and other bone conditions amenable to treatment by use of external fixation.

The Integra External Fixation System half pin bone screws are manufactured from stainless steel and are secured to the bone segment. The half pins come with both self-tapping and self-drilling design features. They are intended for the treatment of bone conditions including leg lengthening, osteotomies, arthrodesis, fracture fixation, and other bone conditions amenable to treatment by use of external fixation.

The Integra External Fixation System half pin bone screws are manufactured from stainless steel and are secured to the bone segment. The half pins come with both self-tapping and self-drilling design features. They are intended for the treatment of bone conditions including leg lengthening, osteotomies, arthrodesis, fracture fixation, and other bone conditions amenable to treatment by use of external fixation.

The Integra External Fixation System half pin bone screws are manufactured from stainless steel and are secured to the bone segment. The half pins come with both self-tapping and self-drilling design features. They are intended for the treatment of bone conditions including leg lengthening, osteotomies, arthrodesis, fracture fixation, and other bone conditions amenable to treatment by use of external fixation.

The Integra External Fixation System half pin bone screws are manufactured from stainless steel and are secured to the bone segment. The half pins come with both self-tapping and self-drilling design features. They are intended for the treatment of bone conditions including leg lengthening, osteotomies, arthrodesis, fracture fixation, and other bone conditions amenable to treatment by use of external fixation.

The Integra External Fixation System half pin bone screws are manufactured from stainless steel and are secured to the bone segment. The half pins come with both self-tapping and self-drilling design features. They are intended for the treatment of bone conditions including leg lengthening, osteotomies, arthrodesis, fracture fixation, and other bone conditions amenable to treatment by use of external fixation.

The Integra External Fixation System footplate is used for stability and structure. It is manufactured from aluminum. It is intended for the treatment of bone conditions including leg lengthening, osteotomies, arthrodesis, fracture fixation, and other bone conditions amenable to treatment by use of external fixation.

The washer is used in conjunction with the Integra External Fixation System. It is made from stainless steel and is rectangular in shape.

The washer is used in conjunction with the Integra External Fixation System. It is made from stainless steel and is rectangular in shape.

The Integra External Fixation System half pin caps are added to cover the cut end of the half pins.

The conical washer is used in conjunction with the Integra External Fixation System. It is made from stainless steel and is concave.

The conical washer is used in conjunction with the Integra External Fixation System. It is made from stainless steel and is convex.

The hex post is used to connect and support rings in the construct. The hex post is made from stainless steel.

The hex post is used to connect and support rings in the construct. The hex post is made from stainless steel.

The hex post is used to connect and support rings in the construct. The hex post is made from stainless steel.

The round speed nut is used for quick temporary stabilization of the strut to the ring.

The extended compression distraction nut is manufactured from stainless steel and is used to secure components in the Integra External Fixation System.

The Integra External Fixation System three-hole plate is manufactured from stainless steel. It is intended for the treatment of bone conditions including leg lengthening, osteotomies, arthrodesis, fracture fixation, and other bone conditions amenable to treatment by use of external fixation.

The Universal Wire Fixation Bolts are used to connect the wires to the rings. They are made from stainless steel.

The Universal Wire Fixation Bolts are used to connect the wires to the rings. They are made from stainless steel.

The rubber wire and half pin stopper coin is used in conjunction with the Integra External Fixation System.

The one hole cube is used to allow the fixation wire to be tensioned axially without deformation by the wire tensioner. The cube is manufactured from stainless steel.

The two hole cube is used to allow the fixation wire to be tensioned axially without deformation by the wire tensioner. The cube is manufactured from stainless steel.

The three hole cube is used to allow the fixation wire to be tensioned axially without deformation by the wire tensioner. The cube is manufactured from stainless steel.

The four hole cube is used to allow the fixation wire to be tensioned axially without deformation by the wire tensioner. The cube is manufactured from stainless steel.

The slotted post is used to achieve greater distances off the ring of the Integra External Fixation System. This allows not only greater distance for the wire off the ring, but for multiple degrees of freedom in wire placement that a standard fixation bolt does not permit.

The slotted post is used to achieve greater distances off the ring of the Integra External Fixation System. This allows not only greater distance for the wire off the ring, but for multiple degrees of freedom in wire placement that a standard fixation bolt does not permit.

The Integra External Fixation System plate is manufactured from stainless steel. It is intended for the treatment of bone conditions including leg lengthening, osteotomies, arthrodesis, fracture fixation, and other bone conditions amenable to treatment by use of external fixation.

The threaded rod is used to connect and support rings in the construct. The rod is made from stainless steel.

The threaded rod is used to connect and support rings in the construct. The rod is made from stainless steel.

The threaded rod is used to connect and support rings in the construct. The rod is made from stainless steel.

The threaded rod is used to connect and support rings in the construct. The rod is made from stainless steel.

The threaded rod is used to connect and support rings in the construct. The rod is made from stainless steel.

The threaded rod is used to connect and support rings in the construct. The rod is made from stainless steel.

The bolt is used to secure the construct and is manufactured from stainless steel.

The bolt is used to secure the construct and is manufactured from stainless steel.

The bolt is used to secure the construct and is manufactured from stainless steel.

The nut is made from stainless steel and is used to secure the strut into the ring.

The angular half pin fixation clamp is made from stainless steel and is used to connect half pins to the rings.

The strut is an adjustable component designed to facilitate building and maintaining frames, from initial surgery to follow-up care. This strut features a tightened mode which allows for fine adjustments in vertical translation; this enables surgeons to conveniently apply compression and distraction to the frame, both intra-operatively and post-operatively. The fully locked mode restricts translation and angular movement creating a rigid construct.

The strut is an adjustable component designed to facilitate building and maintaining frames, from initial surgery to follow-up care. This strut features an unlocked mode, where large adjustments may be made to the component’s vertical translation. It also features one distal end which is designed to enable construction of frames with offset rings or different diameter rings. The tightened mode allows for fine adjustments in vertical translation; this enables surgeons to conveniently apply compression and distraction to the frame, both intra-operatively and post-operatively. The fully locked mode restricts translation and angular movement creating a rigid construct.

The strut is an adjustable component designed to facilitate building and maintaining frames, from initial surgery to follow-up care. This strut features an unlocked mode, where large adjustments may be made to the component’s vertical translation. It also features two distal ends which are designed to enable construction of frames with offset rings or different diameter rings. The tightened mode allows for fine adjustments in vertical translation; this enables surgeons to conveniently apply compression and distraction to the frame, both intra-operatively and post-operatively. The fully locked mode restricts translation and angular movement creating a rigid construct.

The universal joint is made from stainless steel. It is used to aid in the assembly of the Integra External Fixation System.