OptiFuse BA is a bone void filler consisting of a collagen matrix mineralized with hydroxyapatite (HA) – tri-calcium phosphate (TCP) granules and 45S5 bioactive glass granules. The bovine fibrillar collagen component is biocompatible and the 45S5 glass particles are bioactive.OptiFuse BA is indicated for use in bony voids or gaps of the skeletal system (i.e. extremities, pelvis and posterolateral spine). These osseous defects are surgically created or result from traumatic injury to the bone and are not intrinsic to the stability of the bony structure. The graft resorbs and is replaced by the growth of new bone during the healing process. OptiFuse BA must be used with autogenous bone marrow aspirate and autograft in the posterolateral spine.

OptiFuse BA is a bone void filler consisting of a collagen matrix mineralized with hydroxyapatite (HA) – tri-calcium phosphate (TCP) granules and 45S5 bioactive glass granules. The bovine fibrillar collagen component is biocompatible and the 45S5 glass particles are bioactive.OptiFuse BA is indicated for use in bony voids or gaps of the skeletal system (i.e. extremities, pelvis and posterolateral spine). These osseous defects are surgically created or result from traumatic injury to the bone and are not intrinsic to the stability of the bony structure. The graft resorbs and is replaced by the growth of new bone during the healing process. OptiFuse BA must be used with autogenous bone marrow aspirate and autograft in the posterolateral spine.

Bi-Ostetic Bioactive Glass Foam is a bone void filler consisting of a collagen matrix mineralized with hydroxyapatite (HA) – tri-calcium phosphate (TCP) granules and 45S5 bioactive glass granules. The bovine fibrillar collagen component is biocompatible and the 45S5 glass particles are bioactive.Bi-Ostetic Bioactive Glass Foam is indicated for use in bony voids or gaps of the skeletal system (i.e. extremities, pelvis and posterolateral spine). These osseous defects are surgically created or result from traumatic injury to the bone and are not intrinsic to the stability of the bony structure. The graft resorbs and is replaced by the growth of new bone during the healing process. Bi-Ostetic Bioactive Glass Foam must be used with autogenous bone marrow aspirate and autograft in the posterolateral spine.

Bi-Ostetic Bioactive Glass Foam is a bone void filler consisting of a collagen matrix mineralized with hydroxyapatite (HA) – tri-calcium phosphate (TCP) granules and 45S5 bioactive glass granules. The bovine fibrillar collagen component is biocompatible and the 45S5 glass particles are bioactive.Bi-Ostetic Bioactive Glass Foam is indicated for use in bony voids or gaps of the skeletal system (i.e. extremities, pelvis and posterolateral spine). These osseous defects are surgically created or result from traumatic injury to the bone and are not intrinsic to the stability of the bony structure. The graft resorbs and is replaced by the growth of new bone during the healing process. Bi-Ostetic Bioactive Glass Foam must be used with autogenous bone marrow aspirate and autograft in the posterolateral spine.

Bi-Ostetic Bioactive Glass Foam is a bone void filler consisting of a collagen matrix mineralized with hydroxyapatite (HA) – tri-calcium phosphate (TCP) granules and 45S5 bioactive glass granules. The bovine fibrillar collagen component is biocompatible and the 45S5 glass particles are bioactive.Bi-Ostetic Bioactive Glass Foam is indicated for use in bony voids or gaps of the skeletal system (i.e. extremities, pelvis and posterolateral spine). These osseous defects are surgically created or result from traumatic injury to the bone and are not intrinsic to the stability of the bony structure. The graft resorbs and is replaced by the growth of new bone during the healing process. Bi-Ostetic Bioactive Glass Foam must be used with autogenous bone marrow aspirate and autograft in the posterolateral spine.

Bi-Ostetic Bioactive Glass Foam is a bone void filler consisting of a collagen matrix mineralized with hydroxyapatite (HA) – tri-calcium phosphate (TCP) granules and 45S5 bioactive glass granules. The bovine fibrillar collagen component is biocompatible and the 45S5 glass particles are bioactive.Bi-Ostetic Bioactive Glass Foam is indicated for use in bony voids or gaps of the skeletal system (i.e. extremities, pelvis and posterolateral spine). These osseous defects are surgically created or result from traumatic injury to the bone and are not intrinsic to the stability of the bony structure. The graft resorbs and is replaced by the growth of new bone during the healing process. Bi-Ostetic Bioactive Glass Foam must be used with autogenous bone marrow aspirate and autograft in the posterolateral spine.

Bi-Ostetic Bioactive Glass Foam is a bone void filler consisting of a collagen matrix mineralized with hydroxyapatite (HA) – tri-calcium phosphate (TCP) granules and 45S5 bioactive glass granules. The bovine fibrillar collagen component is biocompatible and the 45S5 glass particles are bioactive.Bi-Ostetic Bioactive Glass Foam is indicated for use in bony voids or gaps of the skeletal system (i.e. extremities, pelvis and posterolateral spine). These osseous defects are surgically created or result from traumatic injury to the bone and are not intrinsic to the stability of the bony structure. The graft resorbs and is replaced by the growth of new bone during the healing process. Bi-Ostetic Bioactive Glass Foam must be used with autogenous bone marrow aspirate and autograft in the posterolateral spine.

Bi-Ostetic Bioactive Glass Foam is a bone void filler consisting of a collagen matrix mineralized with hydroxyapatite (HA) – tri-calcium phosphate (TCP) granules and 45S5 bioactive glass granules. The bovine fibrillar collagen component is biocompatible and the 45S5 glass particles are bioactive.Bi-Ostetic Bioactive Glass Foam is indicated for use in bony voids or gaps of the skeletal system (i.e. extremities, pelvis and posterolateral spine). These osseous defects are surgically created or result from traumatic injury to the bone and are not intrinsic to the stability of the bony structure. The graft resorbs and is replaced by the growth of new bone during the healing process. Bi-Ostetic Bioactive Glass Foam must be used with autogenous bone marrow aspirate and autograft in the posterolateral spine.

Bi-Ostetic Bioactive Glass Foam is a bone void filler consisting of a collagen matrix mineralized with hydroxyapatite (HA) – tri-calcium phosphate (TCP) granules and 45S5 bioactive glass granules. The bovine fibrillar collagen component is biocompatible and the 45S5 glass particles are bioactive.Bi-Ostetic Bioactive Glass Foam is indicated for use in bony voids or gaps of the skeletal system (i.e. extremities, pelvis and posterolateral spine). These osseous defects are surgically created or result from traumatic injury to the bone and are not intrinsic to the stability of the bony structure. The graft resorbs and is replaced by the growth of new bone during the healing process. Bi-Ostetic Bioactive Glass Foam must be used with autogenous bone marrow aspirate and autograft in the posterolateral spine.

Bi-Ostetic Bioactive Glass Foam is a bone void filler consisting of a collagen matrix mineralized with hydroxyapatite (HA) – tri-calcium phosphate (TCP) granules and 45S5 bioactive glass granules. The bovine fibrillar collagen component is biocompatible and the 45S5 glass particles are bioactive.Bi-Ostetic Bioactive Glass Foam is indicated for use in bony voids or gaps of the skeletal system (i.e. extremities, pelvis and posterolateral spine). These osseous defects are surgically created or result from traumatic injury to the bone and are not intrinsic to the stability of the bony structure. The graft resorbs and is replaced by the growth of new bone during the healing process. Bi-Ostetic Bioactive Glass Foam must be used with autogenous bone marrow aspirate and autograft in the posterolateral spine.

Bi-Ostetic Bioactive Glass Foam is a bone void filler consisting of a collagen matrix mineralized with hydroxyapatite (HA) – tri-calcium phosphate (TCP) granules and 45S5 bioactive glass granules. The bovine fibrillar collagen component is biocompatible and the 45S5 glass particles are bioactive.Bi-Ostetic Bioactive Glass Foam is indicated for use in bony voids or gaps of the skeletal system (i.e. extremities, pelvis and posterolateral spine). These osseous defects are surgically created or result from traumatic injury to the bone and are not intrinsic to the stability of the bony structure. The graft resorbs and is replaced by the growth of new bone during the healing process. Bi-Ostetic Bioactive Glass Foam must be used with autogenous bone marrow aspirate and autograft in the posterolateral spine.

Bi-Ostetic Bioactive Glass Foam is a bone void filler consisting of a collagen matrix mineralized with hydroxyapatite (HA) – tri-calcium phosphate (TCP) granules and 45S5 bioactive glass granules. The bovine fibrillar collagen component is biocompatible and the 45S5 glass particles are bioactive.Bi-Ostetic Bioactive Glass Foam is indicated for use in bony voids or gaps of the skeletal system (i.e. extremities, pelvis and posterolateral spine). These osseous defects are surgically created or result from traumatic injury to the bone and are not intrinsic to the stability of the bony structure. The graft resorbs and is replaced by the growth of new bone during the healing process. Bi-Ostetic Bioactive Glass Foam must be used with autogenous bone marrow aspirate and autograft in the posterolateral spine.

Bi-Ostetic Bioactive Glass Foam is a bone void filler consisting of a collagen matrix mineralized with hydroxyapatite (HA) – tri-calcium phosphate (TCP) granules and 45S5 bioactive glass granules. The bovine fibrillar collagen component is biocompatible and the 45S5 glass particles are bioactive.Bi-Ostetic Bioactive Glass Foam is indicated for use in bony voids or gaps of the skeletal system (i.e. extremities, pelvis and posterolateral spine). These osseous defects are surgically created or result from traumatic injury to the bone and are not intrinsic to the stability of the bony structure. The graft resorbs and is replaced by the growth of new bone during the healing process. Bi-Ostetic Bioactive Glass Foam must be used with autogenous bone marrow aspirate and autograft in the posterolateral spine.

HA-TCP Sponge is a sterile bone graft composed of purified fibrillar Type I collagen and Bi-Ostetic (60% hydroxyapatite - 40% tricalcium phosphate) resorbable granules. This device is safe and has excellent biocompatibility. After it is implanted, the graft resorbs and is later replaced by natural bone.HA-TCP Sponge is indicated for use in bony voids or gaps that are not intrinsic to the stability of the bony structure. The product should be gently packed into bony voids or gaps of the skeletal system (i.e., the extremities, posterolateral spine and pelvis). These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. The product provides a bone void filler that resorbs and is replaced by the growth of new bone during the healing process. In weight bearing situations, the graft is to be used in conjunction with internal or external fixation devices. The fracture defect treated should not exceed 30 ml.

HA-TCP-Bioglass Sponge is a bone void filler consisting of a collagen matrix mineralized with hydroxyapatite (HA) – tri-calcium phosphate (TCP) granules and 45S5 bioactive glass granules. The bovine fibrillar collagen component is biocompatible and the 45S5 glass particles are bioactive.HA-TCP-Bioglass Sponge is indicated for use in bony voids or gaps of the skeletal system (i.e. extremities, pelvis and posterolateral spine). These osseous defects are surgically created or result from traumatic injury to the bone and are not intrinsic to the stability of the bony structure. The graft resorbs and is replaced by the growth of new bone during the healing process. HA-TCP-Bioglass Sponge must be used with autogenous bone marrow aspirate and autograft in the posterolateral spine.

STRATOFUSE is a sterile bone graft composed of purified fibrillar type I collagen and 60% hydroxyapatite - 40% tricalcium phosphate resorbable granules. This device, formulated as a block (strip), is safe and has excellent biocompatibility. After it is implanted, the graft resorbs and is later replaced by natural bone.STRATOFUSE is indicated for use in bony voids or gaps that are not intrinsic to the stability of the bony structure. The product should be gently packed into bony voids or gaps of the skeletal system (i.e., the extremities, posterolateral spine and pelvis). These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. The product provides a bone void filler that resorbs and is replaced by the growth of new bone during the healing process. In weight bearing situations, the graft is to be used in conjunction with internal or external fixation devices. The fracture defect treated should not exceed 30ml.

STRATOFUSE is a sterile bone graft composed of purified fibrillar type I collagen and 60% hydroxyapatite - 40% tricalcium phosphate resorbable granules. This device, formulated as a block (strip), is safe and has excellent biocompatibility. After it is implanted, the graft resorbs and is later replaced by natural bone.STRATOFUSE is indicated for use in bony voids or gaps that are not intrinsic to the stability of the bony structure. The product should be gently packed into bony voids or gaps of the skeletal system (i.e., the extremities, posterolateral spine and pelvis). These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. The product provides a bone void filler that resorbs and is replaced by the growth of new bone during the healing process. In weight bearing situations, the graft is to be used in conjunction with internal or external fixation devices. The fracture defect treated should not exceed 30ml.

STRATOFUSE is a sterile bone graft composed of purified fibrillar type I collagen and 60% hydroxyapatite - 40% tricalcium phosphate resorbable granules. This device, formulated as a block (strip), is safe and has excellent biocompatibility. After it is implanted, the graft resorbs and is later replaced by natural bone.STRATOFUSE is indicated for use in bony voids or gaps that are not intrinsic to the stability of the bony structure. The product should be gently packed into bony voids or gaps of the skeletal system (i.e., the extremities, posterolateral spine and pelvis). These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. The product provides a bone void filler that resorbs and is replaced by the growth of new bone during the healing process. In weight bearing situations, the graft is to be used in conjunction with internal or external fixation devices. The fracture defect treated should not exceed 30ml.

STRATOFUSE is a sterile bone graft composed of purified fibrillar type I collagen and 60% hydroxyapatite - 40% tricalcium phosphate resorbable granules. This device, formulated as a putty, is safe and has excellent biocompatibility. After it is implanted, the graft resorbs and is later replaced by natural bone.STRATOFUSE is indicated for use in bony voids or gaps that are not intrinsic to the stability of the bony structure. The product should be gently packed into bony voids or gaps of the skeletal system (i.e., the extremities, posterolateral spine and pelvis). These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. The product provides a bone void filler that resorbs and is replaced by the growth of new bone during the healing process. In weight bearing situations, the graft is to be used in conjunction with internal or external fixation devices. The fracture defect treated should not exceed 30ml.

STRATOFUSE is a sterile bone graft composed of purified fibrillar type I collagen and 60% hydroxyapatite - 40% tricalcium phosphate resorbable granules. This device, formulated as a putty, is safe and has excellent biocompatibility. After it is implanted, the graft resorbs and is later replaced by natural bone.STRATOFUSE is indicated for use in bony voids or gaps that are not intrinsic to the stability of the bony structure. The product should be gently packed into bony voids or gaps of the skeletal system (i.e., the extremities, posterolateral spine and pelvis). These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. The product provides a bone void filler that resorbs and is replaced by the growth of new bone during the healing process. In weight bearing situations, the graft is to be used in conjunction with internal or external fixation devices. The fracture defect treated should not exceed 30ml.

STRATOFUSE is a sterile bone graft composed of purified fibrillar type I collagen and 60% hydroxyapatite - 40% tricalcium phosphate resorbable granules. This device, formulated as a putty, is safe and has excellent biocompatibility. After it is implanted, the graft resorbs and is later replaced by natural bone.STRATOFUSE is indicated for use in bony voids or gaps that are not intrinsic to the stability of the bony structure. The product should be gently packed into bony voids or gaps of the skeletal system (i.e., the extremities, posterolateral spine and pelvis). These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. The product provides a bone void filler that resorbs and is replaced by the growth of new bone during the healing process. In weight bearing situations, the graft is to be used in conjunction with internal or external fixation devices. The fracture defect treated should not exceed 30ml.

Bi-Ostetic Foam Putty is a sterile bone graft composed of purified fibrillar Type I collagen and Bi-Ostetic (60% hydroxyapatite - 40% tricalcium phosphate) resorbable granules. This device is safe and has excellent biocompatibility. After it is implanted, the graft resorbs and is later replaced by natural bone.Bi-Ostetic Foam Putty is indicated for use in bony voids or gaps that are not intrinsic to the stability of the bony structure. The product should be gently packed into bony voids or gaps of the skeletal system (i.e., the extremities, posterolateral spine and pelvis). These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. The product provides a bone void filler that resorbs and is replaced by the growth of new bone during the healing process. In weight bearing situations, the graft is to be used in conjunction with internal or external fixation devices. The fracture defect treated should not exceed 30 ml.

Bi-Ostetic Foam Strip is a sterile bone graft composed of purified fibrillar Type I collagen and Bi-Ostetic (60% hydroxyapatite - 40% tricalcium phosphate) resorbable granules. This device is safe and has excellent biocompatibility. After it is implanted, the graft resorbs and is later replaced by natural bone.Bi-Ostetic Foam Strip is indicated for use in bony voids or gaps that are not intrinsic to the stability of the bony structure. The product should be gently packed into bony voids or gaps of the skeletal system (i.e., the extremities, posterolateral spine and pelvis). These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. The product provides a bone void filler that resorbs and is replaced by the growth of new bone during the healing process. In weight bearing situations, the graft is to be used in conjunction with internal or external fixation devices. The fracture defect treated should not exceed 30 ml.

Bi-Ostetic Foam Strip is a sterile bone graft composed of purified fibrillar Type I collagen and Bi-Ostetic (60% hydroxyapatite - 40% tricalcium phosphate) resorbable granules. This device is safe and has excellent biocompatibility. After it is implanted, the graft resorbs and is later replaced by natural bone.Bi-Ostetic Foam Strip is indicated for use in bony voids or gaps that are not intrinsic to the stability of the bony structure. The product should be gently packed into bony voids or gaps of the skeletal system (i.e., the extremities, posterolateral spine and pelvis). These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. The product provides a bone void filler that resorbs and is replaced by the growth of new bone during the healing process. In weight bearing situations, the graft is to be used in conjunction with internal or external fixation devices. The fracture defect treated should not exceed 30 ml.

i2b™ Rapid Set is a bio-engineered mixture of calcium-based inorganic compounds. After it is implanted, i2b™ Rapid Set resorbs and is later replaced by natural bone. It provides a safe alternative to human or animal cadaver bone that completely eliminates the potential for disease transmission.i2b™ Rapid Set is an osteoconductive putty that is intended to be used to fill voids and gaps that are not intrinsic to the stability of the bone structure. These gaps or voids may be located in the extremities, spine, pelvis, or cranium. The putty may be shaped and pressed into the void by hand or inserted into a syringe and injected into the surgical site. The paste set in situ or ex situ provides a void filler that can augment hardware to support bone fragments during the surgical procedure. The set putty acts as a temporary support medium and is not intended to provide structural support during the healing process. The implant is radio-opaque. It is biocompatible and resorbs in the body as bone in-growth occurs.

i2b™ Rapid Set is a bio-engineered mixture of calcium-based inorganic compounds. After it is implanted, i2b™ Rapid Set resorbs and is later replaced by natural bone. It provides a safe alternative to human or animal cadaver bone that completely eliminates the potential for disease transmission.i2b™ Rapid Set is an osteoconductive putty that is intended to be used to fill voids and gaps that are not intrinsic to the stability of the bone structure. These gaps or voids may be located in the extremities, spine, pelvis, or cranium. The putty may be shaped and pressed into the void by hand or inserted into a syringe and injected into the surgical site. The paste set in situ or ex situ provides a void filler that can augment hardware to support bone fragments during the surgical procedure. The set putty acts as a temporary support medium and is not intended to provide structural support during the healing process. The implant is radio-opaque. It is biocompatible and resorbs in the body as bone in-growth occurs.

Tribio® DP Wedge is a bone void filler consisting of 60% hydroxyapatite (HA) and 40% beta-tri-calcium phosphate (TCP). These materials have been the topic of extensive clinical studies for several decades. The device provides a scaffold around which new bone can grow. A series of surface reactions on the particles results in the formation of a calcium phosphate layer that is substantially equivalent in composition and structure to the hydroxyapatite found in bone mineral. After implantation, the device resorbs and is later replaced by natural bone.

Tribio® DP Wedge is a bone void filler consisting of 60% hydroxyapatite (HA) and 40% beta-tri-calcium phosphate (TCP). These materials have been the topic of extensive clinical studies for several decades. The device provides a scaffold around which new bone can grow. A series of surface reactions on the particles results in the formation of a calcium phosphate layer that is substantially equivalent in composition and structure to the hydroxyapatite found in bone mineral. After implantation, the device resorbs and is later replaced by natural bone.

Tribio® DP Wedge is a bone void filler consisting of 60% hydroxyapatite (HA) and 40% beta-tri-calcium phosphate (TCP). These materials have been the topic of extensive clinical studies for several decades. The device provides a scaffold around which new bone can grow. A series of surface reactions on the particles results in the formation of a calcium phosphate layer that is substantially equivalent in composition and structure to the hydroxyapatite found in bone mineral. After implantation, the device resorbs and is later replaced by natural bone.

Tribio® DP Wedge is a bone void filler consisting of 60% hydroxyapatite (HA) and 40% beta-tri-calcium phosphate (TCP). These materials have been the topic of extensive clinical studies for several decades. The device provides a scaffold around which new bone can grow. A series of surface reactions on the particles results in the formation of a calcium phosphate layer that is substantially equivalent in composition and structure to the hydroxyapatite found in bone mineral. After implantation, the device resorbs and is later replaced by natural bone.

Tribio® DP Wedge is a bone void filler consisting of 60% hydroxyapatite (HA) and 40% beta-tri-calcium phosphate (TCP). These materials have been the topic of extensive clinical studies for several decades. The device provides a scaffold around which new bone can grow. A series of surface reactions on the particles results in the formation of a calcium phosphate layer that is substantially equivalent in composition and structure to the hydroxyapatite found in bone mineral. After implantation, the device resorbs and is later replaced by natural bone.

Tribio® DP Wedge is a bone void filler consisting of 60% hydroxyapatite (HA) and 40% beta-tri-calcium phosphate (TCP). These materials have been the topic of extensive clinical studies for several decades. The device provides a scaffold around which new bone can grow. A series of surface reactions on the particles results in the formation of a calcium phosphate layer that is substantially equivalent in composition and structure to the hydroxyapatite found in bone mineral. After implantation, the device resorbs and is later replaced by natural bone.

Tribio® DP Wedge is a bone void filler consisting of 60% hydroxyapatite (HA) and 40% beta-tri-calcium phosphate (TCP). These materials have been the topic of extensive clinical studies for several decades. The device provides a scaffold around which new bone can grow. A series of surface reactions on the particles results in the formation of a calcium phosphate layer that is substantially equivalent in composition and structure to the hydroxyapatite found in bone mineral. After implantation, the device resorbs and is later replaced by natural bone.

Tribio® DP Wedge is a bone void filler consisting of 60% hydroxyapatite (HA) and 40% beta-tri-calcium phosphate (TCP). These materials have been the topic of extensive clinical studies for several decades. The device provides a scaffold around which new bone can grow. A series of surface reactions on the particles results in the formation of a calcium phosphate layer that is substantially equivalent in composition and structure to the hydroxyapatite found in bone mineral. After implantation, the device resorbs and is later replaced by natural bone.

Tribio™ Implant is a bone void filler consisting of a collagen matrix mineralized with hydroxyapatite (HA) – tri-calcium phosphate (TCP) granules and 45S5 bioactive glass granules. The bovine fibrillar collagen component is biocompatible. The 45S5 glass particles are bioactive. The device is available in the form of granules, strips, and putty. The composition of the granules is 60 wt% HA and 40 wt% TCP. The amount of 45S5 granules in the graft is 20 wt%. The device provides a scaffold around which new bone can grow. A series of surface reactions on the particles results in the formation of a calcium phosphate layer that is substantially equivalent in composition and structure to the hydroxyapatite found in bone mineral. This apatite layer on the 45S5 granules and hydroxyapatite-tri-calcium phosphate granules provide an osteoconductive scaffold onto which the patient’s new bone will grow. During healing, the graft particulate is absorbed and remodeled into new bone.

Tribio™ Implant is a bone void filler consisting of a collagen matrix mineralized with hydroxyapatite (HA) – tri-calcium phosphate (TCP) granules and 45S5 bioactive glass granules. The bovine fibrillar collagen component is biocompatible. The 45S5 glass particles are bioactive. The device is available in the form of granules, strips, and putty. The composition of the granules is 60 wt% HA and 40 wt% TCP. The amount of 45S5 granules in the graft is 20 wt%. The device provides a scaffold around which new bone can grow. A series of surface reactions on the particles results in the formation of a calcium phosphate layer that is substantially equivalent in composition and structure to the hydroxyapatite found in bone mineral. This apatite layer on the 45S5 granules and hydroxyapatite-tri-calcium phosphate granules provide an osteoconductive scaffold onto which the patient’s new bone will grow. During healing, the graft particulate is absorbed and remodeled into new bone.

OsteoBoost Select is a bio-engineered mixture of calcium-based inorganic compounds. After it is implanted, OsteoBoost Select resorbs and is later replaced by natural bone. It provides a safe alternative to human or animal cadaver bone that completely eliminates the potential for disease transmission.OsteoBoost Select is an osteoconductive putty that is intended to be used to fill voids and gaps that are not intrinsic to the stability of the bone structure. These gaps or voids may be located in the extremities, spine, pelvis, or cranium.The putty may be shaped and pressed into the void by hand or inserted into a syringe and injected into the surgical site. The paste set in situ or ex situ provides a void filler that can augment hardware to support bone fragments during the surgical procedure. The set putty acts as a temporary support medium and is not intended to provide structural support during the healing process. The implant is radio-opaque. It is biocompatible and resorbs in the body as bone in-growth occurs.

OsteoBoost is a bio-engineered mixture of calcium-based inorganic compounds. After it is implanted, OsteoBoost resorbs and is later replaced by natural bone. It provides a safe alternative to human or animal cadaver bone that completely eliminates the potential for disease transmission.OsteoBoost is an osteoconductive putty that is intended to be used to fill voids and gaps that are not intrinsic to the stability of the bone structure. These gaps or voids may be located in the extremities, spine, pelvis, or cranium.The putty may be shaped and pressed into the void by hand or inserted into a syringe and injected into the surgical site. The paste set in situ or ex situ provides a void filler that can augment hardware to support bone fragments during the surgical procedure. The set putty acts as a temporary support medium and is not intended to provide structural support during the healing process. The implant is radio-opaque. It is biocompatible and resorbs in the body as bone in-growth occurs.

OsteoBoost Select is a bio-engineered mixture of calcium-based inorganic compounds. After it is implanted, OsteoBoost Select resorbs and is later replaced by natural bone. It provides a safe alternative to human or animal cadaver bone that completely eliminates the potential for disease transmission.OsteoBoost Select is an osteoconductive putty that is intended to be used to fill voids and gaps that are not intrinsic to the stability of the bone structure. These gaps or voids may be located in the extremities, spine, pelvis, or cranium.The putty may be shaped and pressed into the void by hand or inserted into a syringe and injected into the surgical site. The paste set in situ or ex situ provides a void filler that can augment hardware to support bone fragments during the surgical procedure. The set putty acts as a temporary support medium and is not intended to provide structural support during the healing process. The implant is radio-opaque. It is biocompatible and resorbs in the body as bone in-growth occurs.

OsteoBoost is a bio-engineered mixture of calcium-based inorganic compounds. After it is implanted, OsteoBoost resorbs and is later replaced by natural bone. It provides a safe alternative to human or animal cadaver bone that completely eliminates the potential for disease transmission.OsteoBoost is an osteoconductive putty that is intended to be used to fill voids and gaps that are not intrinsic to the stability of the bone structure. These gaps or voids may be located in the extremities, spine, pelvis, or cranium.The putty may be shaped and pressed into the void by hand or inserted into a syringe and injected into the surgical site. The paste set in situ or ex situ provides a void filler that can augment hardware to support bone fragments during the surgical procedure. The set putty acts as a temporary support medium and is not intended to provide structural support during the healing process. The implant is radio-opaque. It is biocompatible and resorbs in the body as bone in-growth occurs.

R-GENIN is a bone void filler consisting of purified bovine collagen, hydroxyapatite, tri-calcium phosphate, and demineralized bone matrix (DBM). The collagen component is biocompatible. After it is implanted, it resorbs and is later replaced by natural bone.R-GENIN is indicated for use in bony voids or gaps that are not intrinsic to the stability of the bony structure. The product should be gently packed into bony voids or gaps of the skeletal system (i.e., the extremities, posterolateral spine, and pelvis). These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. The product provides a bone void filler that resorbs and is replaced by the growth of new bone during the healing process. The bone graft can be mixed with autogenous blood prior to use at the physician's discretion.

R-GENIN is a bone void filler consisting of purified bovine collagen, hydroxyapatite, tri-calcium phosphate, and demineralized bone matrix (DBM). The collagen component is biocompatible. After it is implanted, it resorbs and is later replaced by natural bone.R-GENIN is indicated for use in bony voids or gaps that are not intrinsic to the stability of the bony structure. The product should be gently packed into bony voids or gaps of the skeletal system (i.e., the extremities, posterolateral spine, and pelvis). These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. The product provides a bone void filler that resorbs and is replaced by the growth of new bone during the healing process. The bone graft can be mixed with autogenous blood prior to use at the physician's discretion.

R-GENIN is a bone void filler consisting of purified bovine collagen, hydroxyapatite, tri-calcium phosphate, and demineralized bone matrix (DBM). The collagen component is biocompatible. After it is implanted, it resorbs and is later replaced by natural bone.R-GENIN is indicated for use in bony voids or gaps that are not intrinsic to the stability of the bony structure. The product should be gently packed into bony voids or gaps of the skeletal system (i.e., the extremities, posterolateral spine, and pelvis). These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. The product provides a bone void filler that resorbs and is replaced by the growth of new bone during the healing process. The bone graft can be mixed with autogenous blood prior to use at the physician's discretion.

R-GENIN is a bone void filler consisting of purified bovine collagen, hydroxyapatite, tri-calcium phosphate, and demineralized bone matrix (DBM). The collagen component is biocompatible. After it is implanted, it resorbs and is later replaced by natural bone.R-GENIN is indicated for use in bony voids or gaps that are not intrinsic to the stability of the bony structure. The product should be gently packed into bony voids or gaps of the skeletal system (i.e., the extremities, posterolateral spine, and pelvis). These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. The product provides a bone void filler that resorbs and is replaced by the growth of new bone during the healing process. The bone graft can be mixed with autogenous blood prior to use at the physician's discretion.

R-GENIN is a bone void filler consisting of purified bovine collagen, hydroxyapatite, tri-calcium phosphate, and demineralized bone matrix (DBM). The collagen component is biocompatible. After it is implanted, it resorbs and is later replaced by natural bone.R-GENIN is indicated for use in bony voids or gaps that are not intrinsic to the stability of the bony structure. The product should be gently packed into bony voids or gaps of the skeletal system (i.e., the extremities, posterolateral spine, and pelvis). These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. The product provides a bone void filler that resorbs and is replaced by the growth of new bone during the healing process. The bone graft can be mixed with autogenous blood prior to use at the physician's discretion.

R-GENIN is a bone void filler consisting of purified bovine collagen, hydroxyapatite, tri-calcium phosphate, and demineralized bone matrix (DBM). The collagen component is biocompatible. After it is implanted, it resorbs and is later replaced by natural bone.R-GENIN is indicated for use in bony voids or gaps that are not intrinsic to the stability of the bony structure. The product should be gently packed into bony voids or gaps of the skeletal system (i.e., the extremities, posterolateral spine, and pelvis). These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. The product provides a bone void filler that resorbs and is replaced by the growth of new bone during the healing process. The bone graft can be mixed with autogenous blood prior to use at the physician's discretion.

R-GENIN is a bone void filler consisting of purified bovine collagen, hydroxyapatite, tri-calcium phosphate, and demineralized bone matrix (DBM). The collagen component is biocompatible. After it is implanted, it resorbs and is later replaced by natural bone.R-GENIN is indicated for use in bony voids or gaps that are not intrinsic to the stability of the bony structure. The product should be gently packed into bony voids or gaps of the skeletal system (i.e., the extremities, posterolateral spine, and pelvis). These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. The product provides a bone void filler that resorbs and is replaced by the growth of new bone during the healing process. The bone graft can be mixed with autogenous blood prior to use at the physician's discretion.

R-GENIN is a bone void filler consisting of purified bovine collagen, hydroxyapatite, tri-calcium phosphate, and demineralized bone matrix (DBM). The collagen component is biocompatible. After it is implanted, it resorbs and is later replaced by natural bone.R-GENIN is indicated for use in bony voids or gaps that are not intrinsic to the stability of the bony structure. The product should be gently packed into bony voids or gaps of the skeletal system (i.e., the extremities, posterolateral spine, and pelvis). These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. The product provides a bone void filler that resorbs and is replaced by the growth of new bone during the healing process. The bone graft can be mixed with autogenous blood prior to use at the physician's discretion.

R-GENIN is a bone void filler consisting of purified bovine collagen, hydroxyapatite, tri-calcium phosphate, and demineralized bone matrix (DBM). The collagen component is biocompatible. After it is implanted, it resorbs and is later replaced by natural bone.R-GENIN is indicated for use in bony voids or gaps that are not intrinsic to the stability of the bony structure. The product should be gently packed into bony voids or gaps of the skeletal system (i.e., the extremities, posterolateral spine, and pelvis). These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. The product provides a bone void filler that resorbs and is replaced by the growth of new bone during the healing process. The bone graft can be mixed with autogenous blood prior to use at the physician's discretion.

R-GENIN is a bone void filler consisting of purified bovine collagen, hydroxyapatite, tri-calcium phosphate, and demineralized bone matrix (DBM). The collagen component is biocompatible. After it is implanted, it resorbs and is later replaced by natural bone.R-GENIN is indicated for use in bony voids or gaps that are not intrinsic to the stability of the bony structure. The product should be gently packed into bony voids or gaps of the skeletal system (i.e., the extremities, posterolateral spine, and pelvis). These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. The product provides a bone void filler that resorbs and is replaced by the growth of new bone during the healing process. The bone graft can be mixed with autogenous blood prior to use at the physician's discretion.