RevMed
Home/Brands/BIOCOMPOSITES LTD

BIOCOMPOSITES LTD

101 Results
Results Per Page
  • 50
  • 100
  • 250
Catalog #
Available
Starting At
Name
Company Name
Description
0
-
Genex®
BIOCOMPOSITES LTD
Genex® Bone Graft Substitute is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible.The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe. When injected the mixture sets to form Genex® Bone Graft Substitute a hard but resorbable matrix. Genex® Bone Graft Substitute is supplied sterile.
0
-
Genex®
BIOCOMPOSITES LTD
Genex® Bone Graft Substitute is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible.The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe. When injected the mixture sets to form Genex® Bone Graft Substiute, a hard but resorbable matrix. Genex® Bone Graft Substitute is supplied sterile.
0
-
Stimulan Bullet Mat & Introducer
BIOCOMPOSITES LTD
The STIMULAN® Bullet Mat and Introducer is a surgical instrument whcih includes a mat for preparation of the STIMULAN® bullets, a 7mm introducer, a 9mm introducer and an obturator for hard to reach defects. To be used with 20cc Stimulan Rapid Cure
0
-
geneX® ds
BIOCOMPOSITES LTD
geneX® is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible. One component of the matrix prevents soft tissue in-growth until it is resorbed and replaced by new bony tissue. Another component has been shown to act as a scaffold through which new bone grows. The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe. When injected the mixture sets to form geneX®; a hard but resorbable matrix.
0
-
geneX® ds
BIOCOMPOSITES LTD
geneX® is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible. One component of the matrix prevents soft tissue in-growth until it is resorbed and replaced by new bony tissue. Another component has been shown to act as a scaffold through which new bone grows. The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe. When injected the mixture sets to form geneX®; a hard but resorbable matrix.
0
-
Stimulan® DS
BIOCOMPOSITES LTD
Stimulan® DS Calcium Sulfate Bone Void Filler is provided sterile for single patient use. The kit contains calcium sulfate powder and mixing solution in pre-measured quantities so that when mixed together, the resultant paste is to be injected or digitally packed into open bone/gap to cure insitu. The biodegradable, radiopaque mixture is resorbed in approximately 30-60 days when used in accordance with the device labelling. Stimulan® is manufactured from synthetic implant grade calcium sulfate dihydrate (CaS04, 2H20) that resporbs and is replaced with bone during the healing process. Also as the bone void filler is biodegradable and biocompatible; it may be used at an infected site.
0
-
Stimulan® Rapid Cure
BIOCOMPOSITES LTD
STIMULAN® Rapid Cure provided sterile for single patient use. STIMULAN® Rapid Cure contains calcium sulfate powder and mixing solution in pre-measured quantities so that when mixed together in a sterile mixing bowl, the resultant paste is to be digitally packed into open bone void/gap to set insitu or placed into the mould provided, the mixture sets to form beads. The biodegradable, radiopaque beads are resorbed in approximately 30 – 60 days when used in accordance with the device labelling. STIMULAN® Rapid Cure is manufactured from synthetic implant grade calcium sulfate dihydrate(CaSO4.2H2O) that resorbs and is replaced with bone during the healing process. Also, as the bone void filler beads are biodegradable and biocompatible, they may be used at an infected site.
0
-
Stimulan® Rapid Cure
BIOCOMPOSITES LTD
STIMULAN® Rapid Cure provided sterile for single patient use. STIMULAN® Rapid Cure contains calcium sulfate powder and mixing solution in pre-measured quantities so that when mixed together in a sterile mixing bowl, the resultant paste is to be digitally packed into open bone void/gap to set insitu or placed into the mould provided, the mixture sets to form beads. The biodegradable, radiopaque beads are resorbed in approximately 30 – 60 days when used in accordance with the device labelling. STIMULAN® Rapid Cure is manufactured from synthetic implant grade calcium sulfate dihydrate(CaSO4.2H2O) that resorbs and is replaced with bone during the healing process. Also, as the bone void filler beads are biodegradable and biocompatible, they may be used at an infected site.
0
-
Stimulan® Rapid Cure
BIOCOMPOSITES LTD
STIMULAN® Rapid Cure provided sterile for single patient use. STIMULAN® Rapid Cure contains calcium sulfate powder and mixing solution in pre-measured quantities so that when mixed together in a sterile mixing bowl, the resultant paste is to be digitally packed into open bone void/gap to set insitu or placed into the mould provided, the mixture sets to form beads. The biodegradable, radiopaque beads are resorbed in approximately 30 – 60 days when used in accordance with the device labelling. STIMULAN® Rapid Cure is manufactured from synthetic implant grade calcium sulfate dihydrate(CaSO4.2H2O) that resorbs and is replaced with bone during the healing process. Also, as the bone void filler beads are biodegradable and biocompatible, they may be used at an infected site.
0
-
geneX® ds
BIOCOMPOSITES LTD
geneX® is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible. One component of the matrix prevents soft tissue in-growth until it is resorbed and replaced by new bony tissue. Another component has been shown to act as a scaffold through which new bone grows. The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe.When injected the mixture sets to form geneX®; a hard but resorbable matrix.
0
-
geneX® ds
BIOCOMPOSITES LTD
geneX® is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible. One component of the matrix prevents soft tissue in-growth until it is resorbed and replaced by new bony tissue. Another component has been shown to act as a scaffold through which new bone grows. The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe.When injected the mixture sets to form geneX®; a hard but resorbable matrix.
0
-
Bilok® Screw
BIOCOMPOSITES LTD
The Bilok® Tapered Screw is a cannulated, sterile, single-use bone screw made of an absorbable Poly (L-lactic) acid and calcium phosphate which will gradually be absorbed into the body over a period of 24 months. This function however is patient dependant. The Bilok° Screw provides an interference fixation during femoral and/or tibial fixation in ACL reconstruction that resorbs and is replaced with bone during the healing process. Bilok® Screws are biodegradable and biocompatible.
0
-
Bilok® Screw
BIOCOMPOSITES LTD
The Bilok® Tapered Screw is a cannulated, sterile, single-use bone screw made of an absorbable Poly (L-lactic) acid and calcium phosphate which will gradually be absorbed into the body over a period of 24 months. This function however is patient dependant. The Bilok° Screw provides an interference fixation during femoral and/or tibial fixation in ACL reconstruction that resorbs and is replaced with bone during the healing process. Bilok® Screws are biodegradable and biocompatible.
0
-
Bilok® Screw
BIOCOMPOSITES LTD
The Bilok® Tapered Screw is a cannulated, sterile, single-use bone screw made of an absorbable Poly (L-lactic) acid and calcium phosphate which will gradually be absorbed into the body over a period of 24 months. This function however is patient dependant. The Bilok° Screw provides an interference fixation during femoral and/or tibial fixation in ACL reconstruction that resorbs and is replaced with bone during the healing process. Bilok® Screws are biodegradable and biocompatible.
0
-
Bilok® Screw
BIOCOMPOSITES LTD
The Bilok® Tapered Screw is a cannulated, sterile, single-use bone screw made of an absorbable Poly (L-lactic) acid and calcium phosphate which will gradually be absorbed into the body over a period of 24 months. This function however is patient dependant. The Bilok° Screw provides an interference fixation during femoral and/or tibial fixation in ACL reconstruction that resorbs and is replaced with bone during the healing process. Bilok® Screws are biodegradable and biocompatible.
0
-
Bilok® Screw
BIOCOMPOSITES LTD
The Bilok® Tapered Screw is a cannulated, sterile, single-use bone screw made of an absorbable Poly (L-lactic) acid and calcium phosphate which will gradually be absorbed into the body over a period of 24 months. This function however is patient dependant. The Bilok° Screw provides an interference fixation during femoral and/or tibial fixation in ACL reconstruction that resorbs and is replaced with bone during the healing process. Bilok® Screws are biodegradable and biocompatible.
0
-
Bilok® Screw
BIOCOMPOSITES LTD
The Bilok® Tapered Screw is a cannulated, sterile, single-use bone screw made of an absorbable Poly (L-lactic) acid and calcium phosphate which will gradually be absorbed into the body over a period of 24 months. This function however is patient dependant. The Bilok° Screw provides an interference fixation during femoral and/or tibial fixation in ACL reconstruction that resorbs and is replaced with bone during the healing process. Bilok® Screws are biodegradable and biocompatible.
0
-
Bilok® Screw
BIOCOMPOSITES LTD
The Bilok® Tapered Screw is a cannulated, sterile, single-use bone screw made of an absorbable Poly (L-lactic) acid and calcium phosphate which will gradually be absorbed into the body over a period of 24 months. This function however is patient dependant. The Bilok° Screw provides an interference fixation during femoral and/or tibial fixation in ACL reconstruction that resorbs and is replaced with bone during the healing process. Bilok® Screws are biodegradable and biocompatible.
0
-
Bilok® Screw
BIOCOMPOSITES LTD
The Bilok® Tapered Screw is a cannulated, sterile, single-use bone screw made of an absorbable Poly (L-lactic) acid and calcium phosphate which will gradually be absorbed into the body over a period of 24 months. This function however is patient dependant. The Bilok° Screw provides an interference fixation during femoral and/or tibial fixation in ACL reconstruction that resorbs and is replaced with bone during the healing process. Bilok® Screws are biodegradable and biocompatible and should not be used at an infected site.
0
-
Bilok® ST Screw
BIOCOMPOSITES LTD
The Bilok® ST Screw is a cannulated, sterile, single-use bone screw made of an absorbable Poly (L-lactic) acid and calcium phosphate which will gradually be absorbed into the body over a period of 24 months. This function however is patient dependant. The Bilok® ST Screw is for use as a fixation screw in cruciate ligament surgery. It provides a combination of suspension and compression fixation that resorbs and it is subsequently replaced with bone during the healing process. Bilok® ST Screw is biodegradable and biocompatible.
0
-
Bilok® ST Screw
BIOCOMPOSITES LTD
The Bilok® ST Screw is a cannulated, sterile, single-use bone screw made of an absorbable Poly (L-lactic) acid and calcium phosphate which will gradually be absorbed into the body over a period of 24 months. This function however is patient dependant. The Bilok® ST Screw is for use as a fixation screw in cruciate ligament surgery. It provides a combination of suspension and compression fixation that resorbs and it is subsequently replaced with bone during the healing process. Bilok® ST Screw is biodegradable and biocompatible.
0
-
fortoss® VITAL
BIOCOMPOSITES LTD
fortoss® VITAL is a simple to use, synthetic, resorbable material containing pure ß Tri-Calcium Phosphate (ß TCP) and Calcium Sulfate. When mixed with the solution the ß TCP/Calcium Sulfate matrix produces a mouldable cohesive paste. ß Tri-Calcium Phosphate act as a scaffold through which new bone grows. The Calcium Sulfate hinders soft tissue ingrowth. Its resorption provides a calcium source early in the regenerative process. The product does not contain any animal tissue
0
-
fortoss® VITAL
BIOCOMPOSITES LTD
fortoss® VITAL is a simple to use, synthetic, resorbable material containing pure ß Tri-Calcium Phosphate (ß TCP) and Calcium Sulfate. When mixed with the solution the ß TCP/Calcium Sulfate matrix produces a mouldable cohesive paste. ß Tri-Calcium Phosphate act as a scaffold through which new bone grows. The Calcium Sulfate hinders soft tissue ingrowth. Its resorption provides a calcium source early in the regenerative process. The product does not contain any animal tissue
0
-
geneX® putty
BIOCOMPOSITES LTD
geneX® Putty consists of an inorganic framework of calcium based ions. geneX® Putty has been bioengineered to mimic human bone. It is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible. geneX® Putty is a non-setting putty and is supplied sterile.
0
-
geneX® Putty
BIOCOMPOSITES LTD
geneX® putty consists of an inorganic framework of calcium based ions. geneX® Putty has been bioengineered to mimic human bone. It is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible. geneX® Putty is a non-setting putty and is supplied sterile.
0
-
geneX® putty
BIOCOMPOSITES LTD
geneX® Putty consists of an inorganic framework of calcium based ions. geneX® Putty has been bioengineered to mimic human bone. It is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible. geneX® Putty is a non-setting putty and is supplied sterile.
0
-
geneX®
BIOCOMPOSITES LTD
geneX® is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible.The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe. When injected the mixture sets to form geneX® a hard but resorbable matrix. geneX® is supplied sterile
0
-
geneX®
BIOCOMPOSITES LTD
geneX® is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible.The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe. When injected the mixture sets to form geneX® a hard but resorbable matrix. geneX® is supplied sterile
0
-
Stimulan® Kit
BIOCOMPOSITES LTD
STIMULAN® Kit - provided sterile for single patient use. STIMULAN® Kit contains calcium sulfate powder and mixing solution in pre-measured quantities so that when mixed together in a sterile mixing bowl, the resultant paste is to be injected or digitally packed into open bone void/gap to set in situ or placed into the mould provided, the mixture sets to form beads. The biodegradable, radiopaque beads are resorbed in approximately 30 – 60 days when used in accordance with the device labelling. STIMULAN® Kit is manufactured from synthetic implant grade calcium sulfate dihydrate (CaSO4.2H2O) that resorbs and is replaced with bone during the healing process. Also as the bone void filler beads are biodegradable and biocompatible, they may be used at an infected site.
0
-
Stimulan® Kit
BIOCOMPOSITES LTD
STIMULAN® Kit - provided sterile for single patient use. STIMULAN® Kit contains calcium sulfate powder and mixing solution in pre-measured quantities so that when mixed together in a sterile mixing bowl, the resultant paste is to be injected or digitally packed into open bone void/gap to set in situ or placed into the mould provided, the mixture sets to form beads. The biodegradable, radiopaque beads are resorbed in approximately 30 – 60 days when used in accordance with the device labelling. STIMULAN® Kit is manufactured from synthetic implant grade calcium sulfate dihydrate (CaSO4.2H2O) that resorbs and is replaced with bone during the healing process. Also as the bone void filler beads are biodegradable and biocompatible, they may be used at an infected site.
0
-
Stimulan® Dispenser
BIOCOMPOSITES LTD
Stimulan® Calcium Sulfate Bone Void Filler pellets are provided sterile for single patient use. The biodegradable, radiopaque pellets are resorbed in approximately 30-60 days when used in accordance with the device labelling. Calcium Sulfate Bone Filler is manufactured from medical grade calcium sulfate dihydrate (CaSO4 2H20) and stearic acid that resorbs and is replaced with bone during the healing process. Also as the bone void filler pellets are biodegradable and biocompatible, they may be used at an infected site.
0
-
Stimulan® Pellets
BIOCOMPOSITES LTD
Stimulan® Calcium Sulfate Bone Void Filler pellets are provided sterile for single patient use. The biodegradable, radiopaque pellets are resorbed in approximately 30-60 days when used in accordance with the device labelling. Calcium Sulfate Bone Filler is manufactured from medical grade calcium sulfate dihydrate (CaSO4 2H20) and stearic acid that resorbs and is replaced with bone during the healing process. Also as the bone void filler pellets are biodegradable and biocompatible, they may be used at an infected site.
0
-
Stimulan® Pellets
BIOCOMPOSITES LTD
Stimulan® Calcium Sulfate Bone Void Filler pellets are provided sterile for single patient use. The biodegradable, radiopaque pellets are resorbed in approximately 30-60 days when used in accordance with the device labelling. Calcium Sulfate Bone Filler is manufactured from medical grade calcium sulfate dihydrate (CaSO4 2H20) and stearic acid that resorbs and is replaced with bone during the healing process. Also as the bone void filler pellets are biodegradable and biocompatible, they may be used at an infected site.
0
-
Allogran-R®
BIOCOMPOSITES LTD
Allogran-R® Tri-Calcium Phosphate Bone Graft Substitute is provided sterile for single patient use. The biodegradable, radiopaque granules/blocks are resorbed in approximately 6-12 months when used in accordance with the device labelling. Biocomposites Tri-Calcium Phosphate Bone Graft Substitute is manufactured from medical grade Tri-Calcium Phosphate. Numerous bone graft operations are undertaken every year to repair bone defects caused by surgery, tumours, trauma, infections and other damage. Allogran-R® Tri-Calcium Phosphate Bone Graft Substitute is intended for use in clinical situations where the use of autologous grafts or other bone graft substitutes maybe undesirable, due either to the risk of associated infection or unavailability. Allogran-R® resorbs and is replaced with bone during the healing process.
0
-
Allogran-R®
BIOCOMPOSITES LTD
Allogran-R® Tri-Calcium Phosphate Bone Graft Substitute is provided sterile for single patient use. The biodegradable, radiopaque granules/blocks are resorbed in approximately 6-12 months when used in accordance with the device labelling. Biocomposites Tri-Calcium Phosphate Bone Graft Substitute is manufactured from medical grade Tri-Calcium Phosphate. Numerous bone graft operations are undertaken every year to repair bone defects caused by surgery, tumours, trauma, infections and other damage. Allogran-R® Tri-Calcium Phosphate Bone Graft Substitute is intended for use in clinical situations where the use of autologous grafts or other bone graft substitutes maybe undesirable, due either to the risk of associated infection or unavailability. Allogran-R® resorbs and is replaced with bone during the healing process.
0
-
Allogran-R®
BIOCOMPOSITES LTD
Allogran-R® Tri-Calcium Phosphate Bone Graft Substitute is provided sterile for single patient use. The biodegradable, radiopaque granules/blocks are resorbed in approximately 6-12 months when used in accordance with the device labelling. Biocomposites Tri-Calcium Phosphate Bone Graft Substitute is manufactured from medical grade Tri-Calcium Phosphate. Numerous bone graft operations are undertaken every year to repair bone defects caused by surgery, tumours, trauma, infections and other damage. Allogran-R® Tri-Calcium Phosphate Bone Graft Substitute is intended for use in clinical situations where the use of autologous grafts or other bone graft substitutes maybe undesirable, due either to the risk of associated infection or unavailability. Allogran-R® resorbs and is replaced with bone during the healing process.
0
-
Stimulan Kit 10cc (CHINA ONLY)
BIOCOMPOSITES LTD
(CHINA ONLY) Stimulan® Calcium Sulphate Kit is provided sterile for single patient use. The Kit contains calcium sulphate powder. When the powder is mixed with sterile water in a sterile mixing bowl, the resultant paste is to be injected, digitally packed into open bone void/gap to cure in situ or placed into a mould, the mixture sets to form Stimulan® pellets. The biodegradable, radiopaque pellets are resorbed in approximately 30 - 60 days when used in accordance with the device labelling.
0
-
Stimulan Kit 5cc (CHINA ONLY)
BIOCOMPOSITES LTD
(CHINA ONLY) Stimulan® Calcium Sulphate Kit is provided sterile for single patient use. The Kit contains calcium sulphate powder. When the powder is mixed with sterile water in a sterile mixing bowl, the resultant paste is to be injected, digitally packed into open bone void/gap to cure in situ or placed into a mould, the mixture sets to form Stimulan® pellets. The biodegradable, radiopaque pellets are resorbed in approximately 30 - 60 days when used in accordance with the device labelling.
0
-
Stimulan Rapid Cure 20cc (CHINA ONLY)
BIOCOMPOSITES LTD
(CHINA ONLY) Stimulan® Calcium Sulphate (Stimulan® Rapid Cure) is provided sterile for single patient use The pack contains calcium sulphate powder and water. When the powder is mixed with sterile water in a sterile mixing bowl, the resultant paste is to be digitally packed into open bone void/gap to cure in situ or placed into a mould, the mixture sets to form Stimulan® pellets. The biodegradable, radiopaque pellets are resorbed in approximately 30 - 60 days.
0
-
Stimulan Rapid Cure 10cc (CHINA ONLY)
BIOCOMPOSITES LTD
(CHINA ONLY) Stimulan® Calcium Sulphate (Stimulan® Rapid Cure) is provided sterile for single patient use The pack contains calcium sulphate powder and water. When the powder is mixed with sterile water in a sterile mixing bowl, the resultant paste is to be digitally packed into open bone void/gap to cure in situ or placed into a mould, the mixture sets to form Stimulan® pellets. The biodegradable, radiopaque pellets are resorbed in approximately 30 - 60 days.
0
-
Stimulan Rapid Cure 5cc (CHINA ONLY)
BIOCOMPOSITES LTD
(CHINA ONLY) Stimulan® Calcium Sulphate (Stimulan® Rapid Cure) is provided sterile for single patient use The pack contains calcium sulphate powder and water. When the powder is mixed with sterile water in a sterile mixing bowl, the resultant paste is to be digitally packed into open bone void/gap to cure in situ or placed into a mould, the mixture sets to form Stimulan® pellets. The biodegradable, radiopaque pellets are resorbed in approximately 30 - 60 days.
0
-
Genex Bone Graft Substitute
BIOCOMPOSITES LTD
genex® Bone Graft Substitute is a simple to use synthetic absorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible. The kit contains a powder filled syringe and mixing solution which, when combined, provides a mouldablecohesive paste which may be implanted into open voids/gaps of the musculoskeletal system to set insitu or placed in the bead mould mat provided to form beads for implantation. When injected the mixturesets to form genex® Bone Graft substitute a hard but absorbable matrix. genex® Bone Graft Substituteis supplied sterile. genex® Bone Graft Substitute , accessories and packaging are not made from natural rubber latex.genex® Bone Graft Substitute is MR safe.
0
-
Genex Bone Graft Substitute
BIOCOMPOSITES LTD
genex® Bone Graft Substitute is a simple to use synthetic absorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible. The kit contains a powder filled syringe and mixing solution which, when combined, provides a mouldablecohesive paste which may be implanted into open voids/gaps of the musculoskeletal system to set insitu or placed in the bead mould mat provided to form beads for implantation. When injected the mixturesets to form genex® Bone Graft substitute a hard but absorbable matrix. genex® Bone Graft Substituteis supplied sterile. genex® Bone Graft Substitute , accessories and packaging are not made from natural rubber latex.genex® Bone Graft Substitute is MR safe.
0
-
Genex Bone Graft Substitute
BIOCOMPOSITES LTD
genex® Bone Graft Substitute is a simple to use synthetic absorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible. The kit contains a powder filled syringe and mixing solution which, when combined, provides a mouldablecohesive paste which may be implanted into open voids/gaps of the musculoskeletal system to set in situ or placed in the bead mould mat provided to form beads for implantation. When injected the mixture sets to form genex® Bone Graft substitute a hard but absorbable matrix. genex® Bone Graft Substituteis supplied sterile. genex® Bone Graft Substitute , accessories and packaging are not made from natural rubber latex. genex® Bone Graft Substitute is MR safe.
0
-
Stimulan® Rapid Cure
BIOCOMPOSITES LTD
STIMULAN® Rapid Cure provided sterile for single patient use. STIMULAN® Rapid Cure contains calcium sulfate powder and mixing solution in pre-measured quantities so that when mixed together in a sterile mixing bowl, the resultant paste is to be digitally packed into open bone void/gap to set insitu or placed into the mould provided, the mixture sets to form beads. The biodegradable, radiopaque beads are resorbed in approximately 30 – 60 days when used in accordance with the device labelling. STIMULAN® Rapid Cure is manufactured from synthetic implant grade calcium sulfate dihydrate(CaSO4.2H2O) that resorbs and is replaced with bone during the healing process. Also, as the bone void filler beads are biodegradable and biocompatible, they may be used at an infected site.
0
-
Genex®
BIOCOMPOSITES LTD
Genex® Bone Graft Substitute is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible.The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe. When injected the mixture sets to form Genex® Bone Graft Substitute a hard but resorbable matrix. Genex® Bone Graft Substitute is supplied sterile.
0
-
Genex®
BIOCOMPOSITES LTD
Genex® Bone Graft Substitute is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible.The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe. When injected the mixture sets to form Genex® Bone Graft Substiute, a hard but resorbable matrix. Genex® Bone Graft Substitute is supplied sterile.
0
-
Stimulan Bullet Mat & Introducer
BIOCOMPOSITES LTD
The STIMULAN® Bullet Mat and Introducer is a surgical instrument whcih includes a mat for preparation of the STIMULAN® bullets, a 7mm introducer, a 9mm introducer and an obturator for hard to reach defects. To be used with 20cc Stimulan Rapid Cure
0
-
Biosteon® Screw
BIOCOMPOSITES LTD
The Biosteon® ACL Screw is a cannulated single-use bone screw made of a resorbable Poly (l-lactic) Acid and Calcium Phosphate, which will be gradually resorbed into the body, this function however, is patient dependant.
0
-
Biosteon® Screw
BIOCOMPOSITES LTD
The Biosteon® ACL Screw is a cannulated single-use bone screw made of a resorbable Poly (l-lactic) Acid and Calcium Phosphate, which will be gradually resorbed into the body, this function however, is patient dependant.
  1. 1
  2. 2
  3. 3