A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder that is designed for oral insertion via the trachea and into a lung to maintain airway patency and/or to deliver anaesthetic inhalation agents or other medical gases, and secure ventilation. It is typically made of plastic, rubber, or silicone and may be packaged with a connector that attaches to a breathing circuit and is available in two basic configurations: 1) a double lumen tube with independent cuffs at the distal end for ventilation of the left or right bronchi; or 2) a twin lumen tube with independent cuffs for selective lung ventilation during thoracic surgery or postoperative care when independent lung ventilation is indicated. This is a single-use device.

A hollow cylinder that is designed for oral insertion via the trachea and into a lung to maintain airway patency and/or to deliver anaesthetic inhalation agents or other medical gases, and secure ventilation. It is typically made of plastic, rubber, or silicone and may be packaged with a connector that attaches to a breathing circuit and is available in two basic configurations: 1) a double lumen tube with independent cuffs at the distal end for ventilation of the left or right bronchi; or 2) a twin lumen tube with independent cuffs for selective lung ventilation during thoracic surgery or postoperative care when independent lung ventilation is indicated. This is a single-use device.

A hollow cylinder that is designed for oral insertion via the trachea and into a lung to maintain airway patency and/or to deliver anaesthetic inhalation agents or other medical gases, and secure ventilation. It is typically made of plastic, rubber, or silicone and may be packaged with a connector that attaches to a breathing circuit and is available in two basic configurations: 1) a double lumen tube with independent cuffs at the distal end for ventilation of the left or right bronchi; or 2) a twin lumen tube with independent cuffs for selective lung ventilation during thoracic surgery or postoperative care when independent lung ventilation is indicated. This is a single-use device.

A hollow cylinder that is designed for oral insertion via the trachea and into a lung to maintain airway patency and/or to deliver anaesthetic inhalation agents or other medical gases, and secure ventilation. It is typically made of plastic, rubber, or silicone and may be packaged with a connector that attaches to a breathing circuit and is available in two basic configurations: 1) a double lumen tube with independent cuffs at the distal end for ventilation of the left or right bronchi; or 2) a twin lumen tube with independent cuffs for selective lung ventilation during thoracic surgery or postoperative care when independent lung ventilation is indicated. This is a single-use device.

A hollow cylinder that is designed for oral insertion via the trachea and into a lung to maintain airway patency and/or to deliver anaesthetic inhalation agents or other medical gases, and secure ventilation. It is typically made of plastic, rubber, or silicone and may be packaged with a connector that attaches to a breathing circuit and is available in two basic configurations: 1) a double lumen tube with independent cuffs at the distal end for ventilation of the left or right bronchi; or 2) a twin lumen tube with independent cuffs for selective lung ventilation during thoracic surgery or postoperative care when independent lung ventilation is indicated. This is a single-use device.

A hollow cylinder that is designed for oral insertion via the trachea and into a lung to maintain airway patency and/or to deliver anaesthetic inhalation agents or other medical gases, and secure ventilation. It is typically made of plastic, rubber, or silicone and may be packaged with a connector that attaches to a breathing circuit and is available in two basic configurations: 1) a double lumen tube with independent cuffs at the distal end for ventilation of the left or right bronchi; or 2) a twin lumen tube with independent cuffs for selective lung ventilation during thoracic surgery or postoperative care when independent lung ventilation is indicated. This is a single-use device.

A hollow cylinder that is designed for oral insertion via the trachea and into a lung to maintain airway patency and/or to deliver anaesthetic inhalation agents or other medical gases, and secure ventilation. It is typically made of plastic, rubber, or silicone and may be packaged with a connector that attaches to a breathing circuit and is available in two basic configurations: 1) a double lumen tube with independent cuffs at the distal end for ventilation of the left or right bronchi; or 2) a twin lumen tube with independent cuffs for selective lung ventilation during thoracic surgery or postoperative care when independent lung ventilation is indicated. This is a single-use device.

A hollow cylinder that is designed for oral insertion via the trachea and into a lung to maintain airway patency and/or to deliver anaesthetic inhalation agents or other medical gases, and secure ventilation. It is typically made of plastic, rubber, or silicone and may be packaged with a connector that attaches to a breathing circuit and is available in two basic configurations: 1) a double lumen tube with independent cuffs at the distal end for ventilation of the left or right bronchi; or 2) a twin lumen tube with independent cuffs for selective lung ventilation during thoracic surgery or postoperative care when independent lung ventilation is indicated. This is a single-use device

A hollow cylinder that is designed for oral insertion via the trachea and into a lung to maintain airway patency and/or to deliver anaesthetic inhalation agents or other medical gases, and secure ventilation. It is typically made of plastic, rubber, or silicone and may be packaged with a connector that attaches to a breathing circuit and is available in two basic configurations: 1) a double lumen tube with independent cuffs at the distal end for ventilation of the left or right bronchi; or 2) a twin lumen tube with independent cuffs for selective lung ventilation during thoracic surgery or postoperative care when independent lung ventilation is indicated. This is a single-use device.

A hollow cylinder that is designed for oral insertion via the trachea and into a lung to maintain airway patency and/or to deliver anaesthetic inhalation agents or other medical gases, and secure ventilation. It is typically made of plastic, rubber, or silicone and may be packaged with a connector that attaches to a breathing circuit and is available in two basic configurations: 1) a double lumen tube with independent cuffs at the distal end for ventilation of the left or right bronchi; or 2) a twin lumen tube with independent cuffs for selective lung ventilation during thoracic surgery or postoperative care when independent lung ventilation is indicated. This is a single-use device.

A hollow cylinder that is designed for oral insertion via the trachea and into a lung to maintain airway patency and/or to deliver anaesthetic inhalation agents or other medical gases, and secure ventilation. It is typically made of plastic, rubber, or silicone and may be packaged with a connector that attaches to a breathing circuit and is available in two basic configurations: 1) a double lumen tube with independent cuffs at the distal end for ventilation of the left or right bronchi; or 2) a twin lumen tube with independent cuffs for selective lung ventilation during thoracic surgery or postoperative care when independent lung ventilation is indicated. This is a single-use device

A hollow cylinder that is designed for oral insertion via the trachea and into a lung to maintain airway patency and/or to deliver anaesthetic inhalation agents or other medical gases, and secure ventilation. It is typically made of plastic, rubber, or silicone and may be packaged with a connector that attaches to a breathing circuit and is available in two basic configurations: 1) a double lumen tube with independent cuffs at the distal end for ventilation of the left or right bronchi; or 2) a twin lumen tube with independent cuffs for selective lung ventilation during thoracic surgery or postoperative care when independent lung ventilation is indicated. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device

An armoured hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. It is wire reinforced to prevent kinking during patient movement and may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) have a built-in pilot balloon. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

An armoured hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. It is wire reinforced to prevent kinking during patient movement and may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) have a built-in pilot balloon. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

An armoured hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. It is wire reinforced to prevent kinking during patient movement and may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) have a built-in pilot balloon. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

An armoured hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. It is wire reinforced to prevent kinking during patient movement and may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) have a built-in pilot balloon. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

An armoured hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. It is wire reinforced to prevent kinking during patient movement and may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) have a built-in pilot balloon. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.

An armoured hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. It is wire reinforced to prevent kinking during patient movement and may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) have a built-in pilot balloon. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a single-use device.