The GS Medical AnyPlus PEEK Lumbar Cage device consists of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The implants are made of polyether-ether-ketone (PEEK OPTIMA LT1) (Manufacturer – INVIBIO) body (PEEK conforming to ASTM F2026) with the x-ray markers made of Tantulum (conforming to ASTM F560). The AnyPlus PEEK Lumbar Cage is indicated for use with autogenous bone graft in skeletally mature patients with degenerative disc disease ("DDD") at one or two contiguous spinal levels from L2-S1. DDD is defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies. These patients should have had six months of non-operative treatment. These DDD patients may have up to Grade 1 spondylolisthesis or retrolisthesis at the involved level(s). The AnyPlus PEEK Lumbar Cage is to be combined with internal supplemental fixation cleared for use in the lumbar spine.

The GS Medical AnyPlus PEEK Lumbar Cage device consists of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The implants are made of polyether-ether-ketone (PEEK OPTIMA LT1) (Manufacturer – INVIBIO) body (PEEK conforming to ASTM F2026) with the x-ray markers made of Tantulum (conforming to ASTM F560). The AnyPlus PEEK Lumbar Cage is indicated for use with autogenous bone graft in skeletally mature patients with degenerative disc disease ("DDD") at one or two contiguous spinal levels from L2-S1. DDD is defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies. These patients should have had six months of non-operative treatment. These DDD patients may have up to Grade 1 spondylolisthesis or retrolisthesis at the involved level(s). The AnyPlus PEEK Lumbar Cage is to be combined with internal supplemental fixation cleared for use in the lumbar spine.

The GS Medical AnyPlus PEEK Lumbar Cage device consists of implants available in various heights and lordotic configurations with an open architecture to accept packing of bone graft material. The implants are made of polyether-ether-ketone (PEEK OPTIMA LT1) (Manufacturer – INVIBIO) body (PEEK conforming to ASTM F2026) with the x-ray markers made of Tantulum (conforming to ASTM F560). The AnyPlus PEEK Lumbar Cage is indicated for use with autogenous bone graft in skeletally mature patients with degenerative disc disease ("DDD") at one or two contiguous spinal levels from L2-S1. DDD is defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies. These patients should have had six months of non-operative treatment. These DDD patients may have up to Grade 1 spondylolisthesis or retrolisthesis at the involved level(s). The AnyPlus PEEK Lumbar Cage is to be combined with internal supplemental fixation cleared for use in the lumbar spine.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The GSS Pedicle Screw System is a top-loading multiple component, posterior spinal fixation system which consists of pedicle screws, rods, locking spacer, and a transverse (cross) linking mechanism. The GSS Pedicle Screw System will allow surgeons to build a spinal implant construct to stabilize and promote spinal fusion. The GSS Pedicle Screw System implant components are supplied non-sterile, single use and fabricated from titanium alloy (Ti-6AI-4V ELI) that conforms to ASTM F136. Various sizes of these implants are available. Specialized instruments are available for the application and removal of the GSS Pedicle Screw System. The GSS Pedicle Screw System is a pedicle screw system indicated for the treatment of severe Spondylolisthesis (Grade 3 and 4) of the L5-SI vertebra in skeletally mature patients receiving fusion by autogenous bone graft having implants attached to the lumbar and sacral spine (L3 to sacrum) with removal of the implants after the attainment of a solid fusion.

The GSS Pedicle Screw System is a top-loading multiple component, posterior spinal fixation system which consists of pedicle screws, rods, locking spacer, and a transverse (cross) linking mechanism. The GSS Pedicle Screw System will allow surgeons to build a spinal implant construct to stabilize and promote spinal fusion. The GSS Pedicle Screw System implant components are supplied non-sterile, single use and fabricated from titanium alloy (Ti-6AI-4V ELI) that conforms to ASTM F136. Various sizes of these implants are available. Specialized instruments are available for the application and removal of the GSS Pedicle Screw System. The GSS Pedicle Screw System is a pedicle screw system indicated for the treatment of severe Spondylolisthesis (Grade 3 and 4) of the L5-SI vertebra in skeletally mature patients receiving fusion by autogenous bone graft having implants attached to the lumbar and sacral spine (L3 to sacrum) with removal of the implants after the attainment of a solid fusion.

The GSS Pedicle Screw System is a top-loading multiple component, posterior spinal fixation system which consists of pedicle screws, rods, locking spacer, and a transverse (cross) linking mechanism. The GSS Pedicle Screw System will allow surgeons to build a spinal implant construct to stabilize and promote spinal fusion. The GSS Pedicle Screw System implant components are supplied non-sterile, single use and fabricated from titanium alloy (Ti-6AI-4V ELI) that conforms to ASTM F136. Various sizes of these implants are available. Specialized instruments are available for the application and removal of the GSS Pedicle Screw System. The GSS Pedicle Screw System is a pedicle screw system indicated for the treatment of severe Spondylolisthesis (Grade 3 and 4) of the L5-SI vertebra in skeletally mature patients receiving fusion by autogenous bone graft having implants attached to the lumbar and sacral spine (L3 to sacrum) with removal of the implants after the attainment of a solid fusion.

Rasp, 12x14x5mm 0°

Rasp, 12x14x5mm 8°

Rasp, 12x14x5mm 12°

Trial, Universal, 12x14x9,10mm 8°

Trial, Universal, 12x14x11,12mm 8°

Trial, Universal, 12x14x5,6mm 12°

Trial, Universal, 12x14x7,8mm 12°

Trial, Universal, 12x14x9,10mm 12°

Trial, Universal, 12x14x11,12mm 12°

Trial, Universal, 14x16x5,6mm 0°

Trial, Universal, 14x16x7,8mm 0°

Trial, Universal, 14x16x9,10mm 0°

Trial, Universal, 14x16x11,12mm 0°

Trial, Universal, 14x16x5,6mm 8°

Trial, Universal, 14x16x7,8mm 8°

Trial, Universal, 14x16x9,10mm 8°

Trial, Universal, 14x16x11,12mm 8°

Trial, Universal, 14x16x5,6mm 12°

Trial, Universal, 14x16x7,8mm 12°

Trial, Universal, 14x16x9,10mm 12°

Trial, Universal, 14x16x11,12mm 12°

Trial, Universal, 16x18x5,6mm 0°

Trial, Universal, 16x18x7,8mm 0°

Trial, Universal, 16x18x9,10mm 0°

Trial, Universal, 16x18x11,12mm 0°

Trial, Universal, 16x18x5,6mm 8°

Trial, Universal, 16x18x7,8mm 8°

Trial, Universal, 16x18x9,10mm 8°

Trial, Universal, 16x18x11,12mm 8°

Trial, Universal, 16x18x5,6mm 12°

Trial, Universal, 16x18x7,8mm 12°

Trial, Universal, 16x18x9,10mm 12°

Trial, Universal, 16x18x11,12mm 12°