WB corQC is incorporated as a set of run controls with blood sample testing for the daily quality control of blood bank reagents on automated instruments. A set of WB corQC is composed of four tubes of varying antigenic and antibody makeup. Each packaging of the WB corQC product contains a pair of each of the four tubes.

DAT Positive Control Cell is designed to be used only with the Immucor automated instruments. DAT Positive Control Cells are IgG-coated red blood cells used as a control to confirm the validity of the DAT assay and other assays utilizing the direct antiglobulin test on Immucor automated instruments. This product is the one (1) vial configuration.

DAT Positive Control Cell is designed to be used only with the Immucor automated instruments. DAT Positive Control Cells are IgG-coated red blood cells used as a control to confirm the validity of the DAT assay and other assays utilizing the direct antiglobulin test on Immucor automated instruments. This product is the four (4) vial configuration.

Capture-R Ready-Screen (I and II) is used in the detection of unexpected IgG antibodies to red blood cells by manual, semi-automated or automated solid phase red blood cell adherence methods. This product contains alternating wells coated with red blood cell membranes from one of two group O donors. Each strip consists of eight (8) individual wells to perform four (2-cell) antibody screens.

Capture-R Ready-Screen (Pooled Cells) is used in the detection of unexpected IgG antibodies to red blood cells (in blood donors) by manual, semi-automated or automated solid phase red blood cell adherence methods. Each test well is prepared from a pool of two (2) group O donors. Each microplate strip consists of eight (8) individual wells to perform eight (8) antibody screens. Each microplate is packaged into a pouch.

Capture-R Ready-ID is used in the detection and identification of unexpected IgG antibodies to red blood cells by manual, semi-automated or automated solid phase red blood cell adherence methods. This product is a double-strip configuration which carry the bound and dried membranes prepared from 14 group O donors. Each microplate contains six (6) double-strips, and the plate is sealed in a pouch.

Capture-CMV is an in vitro qualitative solid phase red cell adherence test system for the detection of antibodies (IgG plus IgM) to cytomegalovirus (CMV) in human serum or plasma. Capture-CMV is intended to be used in screening of donors or patients for serological evidence of previous infection by CMV. This is the one plate product.

Capture-R Ready-Screen (I and II) is intended for use in the detection of unexpected IgG antibodies to red blood cells by manual, semi-automated or automated solid phase red blood cell adherence methods. The product contains alternating wells coated with red blood cell membranes from one of two group O donors. Each strip consists of eight (8) individual wells to perform four (2-cell) antibody screens. This particular product code package configuration is made up of five (5) microplates of the identical product, and the identical lot number, placed into the one (1) single box.

Capture-R Ready-Screen (Pooled Cells) is used in the detection of unexpected IgG antibodies to red blood cells (in blood donors) by manual, semi-automated or automated solid phase red blood cell adherence methods. Each test well is prepared from a pool of two (2) group O donors. Each microplate strip consists of eight (8) individual wells to perform eight (8) antibody screens. Each microplate is packaged into a pouch. This particular product code package configuration is made up of five (5) microplates of the identical product, and the identical lot number, placed into the one (1) single box.

Capture-R Ready-ID is used in the detection and identification of unexpected IgG antibodies to red blood cells by manual, semi-automated or automated solid phase red blood cell adherence methods. This product is a double-strip configuration which carry the bound and dried membranes prepared from 14 group O donors. Each microplate contains six (6) double-strips, and the plate is sealed in a pouch. This particular product code package configuration is made up of five (5) microplates of the identical product, and the identical lot number, placed into the one (1) single box.

Capture-R Ready-Screen (I and II) is intended for use in the detection of unexpected IgG antibodies to red blood cells by manual, semi-automated or automated solid phase red blood cell adherence methods. This product contains alternating wells coated with red blood cell membranes from one of two group O donors. Each strip consists of eight (8) individual wells to perform four (2-cell) antibody screens. This particular product code package configuration is made up of five (5) microplates of the identical product, and the identical lot number, placed into the one (1) single box.

Capture LISS is for use as a low ionic strength potentiator and sample addition indicator in Capture solid phase tests for the detection of antibodies. This product is the 57 mL bottle version with six bottles packaged.

Capture-R Control set (Capture-R Positive Control Serum (Weak) and Capture-R Negative Control Serum) are run controls to be used in Capture-R solid phase assays. The Capture-R Positive Control Serum (Weak) contains antibodies to red blood cells. The Capture-R Negative Control Serum does not contain antibodies to red blood cells. This product configuration has one (1) vial of each control, at a volume of 11.5 mL each.

Capture-CMV Indicator Red Cells are part of the Capture-CMV test, and they are used to visualize the final reaction.

The Capture-CMV Control set is composed of both negative and weak positive control material to control the Capture-CMV test.

Capture-P Indicator Red Cells are part of both the Capture-P and Capture-P Ready-Screen tests, and they are used to visualize the final reaction.

Capture-P solid phase system is intended for use in the detection of antibodies to platelets. This is the single microplate product.

Capture-P Ready-Screen solid phase system is used to detect IgG HLA and platelet specific antibodies to platelets. This is a single microplate product.

The Capture-P Control set is composed of both negative and weak positive control material to control both the Capture-P and Capture-P Ready-Screen tests.

Capture-P solid phase system is intended for use in the detection of antibodies to platelets. This is the five (5) microplate product.

Capture-R Ready-Screen (Pooled Cells) is used in the detection of unexpected IgG antibodies to red blood cells (in blood donors) by manual, semi-automated or automated solid phase red blood cell adherence methods. Each test well is prepared from a pool of two (2) group O donors. Each microplate strip consists of eight (8) individual wells to perform eight (8) antibody screens. Each microplate is packaged into a pouch. This particular product code package configuration is made up of five (5) microplates of the identical product, and the identical lot number, placed into the one (1) single box.

corQC EXTEND Standard is intended for use in manual test tube and automated assays for quality control of routine Rh and Kell blood grouping reagents. It is a single vial product.

corQC EXTEND Complete is intended for use in manual test tube and automated assays for quality control of routine Rh and Kell blood grouping reagents. It is a five vial set.

This reagent is intended for use in slide, tube and microplate tests, for the detection of the Rh (D) antigen.

This reagent is used for the detection of the C antigen (Rhesus blood group system) on red blood cells by tube test. This product configuration is a single vial.

This reagent is intended for the detection of the E antigen on red blood cells. This E antigen is part of the Rhesus blood group system.

This reagent is used for the detection of the e antigen (Rhesus blood group system) on red blood cells by tube test. This product configuration is a single vial.

This reagent is used for the detection of the c antigen (Rhesus blood group system) on red blood cells by tube test. This product configuration is a single vial.

This reagent is used for the detection of the K antigen on red blood cells by tube test. This product configuration is a single vial.

Capture-R Ready-Screen (4) is used in the detection of unexpected IgG antibodies to red blood cells by manual, semi-automated or automated solid phase red blood cell adherence methods. This product contains four (4) test wells coated with red blood cell membranes. Each strip consists of two antibody screens, i.e. two (2) sets of four (4) wells. Each microplate contains twelve (12) strips. Each microplate is packaged into a pouch.

Capture-R Ready-Screen (3) is used in the detection of unexpected IgG antibodies to red blood cells by manual, semi-automated or automated solid phase red blood cell adherence methods. This product contains three (3) test wells coated with red blood cell membranes from three (3) group O donors, as well as a positive control well, which all make up one (1) test of four (4) wells. Each strip consists of two antibody screens, i.e. two (2) sets of four (4) wells. Each microplate contains twelve (12) strips. Each microplate is packaged into a pouch.

Capture-R Ready-Screen (3) is used in the detection of unexpected IgG antibodies to red blood cells by manual, semi-automated or automated solid phase red blood cell adherence methods. This product contains three (3) test wells coated with red blood cell membranes from three (3) group O donors, as well as a positive control well, which all make up one (1) test of four (4) wells. Each strip consists of two antibody screens, i.e. two (2) sets of four (4) wells. Each microplate contains twelve (12) strips. Each microplate is packaged into a pouch.

Capture-R Ready-Screen (4) is used in the detection of unexpected IgG antibodies to red blood cells by manual, semi-automated or automated solid phase red blood cell adherence methods. This product contains four (4) test wells coated with red blood cell membranes. Each strip consists of two antibody screens, i.e. two (2) sets of four (4) wells. Each microplate contains twelve (12) strips. Each microplate is packaged into a pouch. This particular product code package configuration is made up of five (5) microplates of the identical product, and the identical lot number, placed into the one (1) single box.

Capture-R Ready-Screen (3) is used in the detection of unexpected IgG antibodies to red blood cells by manual, semi-automated or automated solid phase red blood cell adherence methods. This product contains three (3) test wells coated with red blood cell membranes from three (3) group O donors, as well as a positive control well, which all make up one (1) test of four (4) wells. Each strip consists of two antibody screens, i.e. two (2) sets of four (4) wells. Each microplate contains twelve (12) strips. Each microplate is packaged into a pouch. This particular product code package configuration is made up of five (5) microplates of the identical product, and the identical lot number, placed into the one (1) single box.

Capture-R Ready-Screen (3) is used in the detection of unexpected IgG antibodies to red blood cells by manual, semi-automated or automated solid phase red blood cell adherence methods. This product contains three (3) test wells coated with red blood cell membranes from three (3) group O donors, as well as a positive control well, which all make up one (1) test of four (4) wells. Each strip consists of two antibody screens, i.e. two (2) sets of four (4) wells. Each microplate contains twelve (12) strips. Each microplate is packaged into a pouch. This particular product code package configuration is made up of five (5) microplates of the identical product, and the identical lot number, placed into the one (1) single box.

Capture-R Ready-Screen (3) is used in the detection of unexpected IgG antibodies to red blood cells by manual, semi-automated or automated solid phase red blood cell adherence methods. This product contains three (3) test wells coated with red blood cell membranes from three (3) group O donors, as well as a positive control well, which all make up one (1) test of four (4) wells. Each strip consists of two antibody screens, i.e. two (2) sets of four (4) wells. Each microplate contains twelve (12) strips. Each microplate is packaged into a pouch. This particular product code package configuration is made up of five (5) microplates of the identical product, and the identical lot number, placed into the one (1) single box.

TPHA Screen is used in the qualitative screening of blood donors for the detection of IgG and IgM antibodies to Treponema pallidum in human serum and EDTA plasma by passive hemagglutination using an automated Blood Bank system. The product configuration is ten (10) vials.

TPHA Screen Diluent is a ready for use isotonic saline solution used to dilute sample plasma or serum, and control material, when testing with the TPHA Screen on an automated Blood Bank system. The product configuration is ten (10) vials.

TPHA Screen Positive Control and TPHA Screen Negative Control are run controls used in the TPHA Screen on an automated Blood Bank system. The product configuration is one (1) vial of each control.

Referencells (Pooled Cells) are intended for use in tube and microplate ABO serum grouping tests.

Capture-R Ready-Screen (3) is intended for use in the detection of unexpected IgG antibodies to red blood cells by manual, semi-automated or automated solid phase red blood cell adherence methods.

Immucor’s Capture-R Positive Control Serum (Weak) and Capture-R Negative Control Serum are run controls to be used in Capture-R Solid Phase Assays, including Capture-R Select, Capture-R Ready-Screen and Capture-R Ready-ID. Capture-R Positive Control Serum (Weak) contains antibodies to red blood cells and sodium azide added as a preservative. Capture-R Negative Control Serum contains no antibodies to red blood cells; sodium azide is added as a preservative.

The Capture-R Select Solid Phase System provides modified microwells for the immobilization of human erythrocytes for use in solid phase assays for the detection of IgG red blood cell antibodies to corresponding red blood cell antigens (e.g., antibody screening, selected red blood cell panels, crossmatching, or antigen phenotyping).

Capture-P Solid Phase System is intended for use in the detection of antibodies to platelets. Capture-P Solid Phase System is designed to detect the unexpected antiplatelet antibodies (antibody screening test) in a patient or donor population.

Immucor’s Capture-P Positive Control Serum (Weak) and Capture-P Negative Control Serum are run controls to be used in the Capture-P and Capture-P Ready-Screen Solid Phase assays.

The Galileo Echo is a microprocessor-controlled instrument designed to fully automate immunohematology in vitro diagnostic testing of human blood. The Galileo Echo automates test processing, result interpretation, and data management functions. The Galileo Echo is designed to automate standard immunohematology assays using a microstrip-based platform. Assays include ABO and Rh (D) typing, detection/identification of IgG red blood cell antibodies, compatibility testing, and red blood cell phenotyping.

CMT Plates are intended to be used in hemagglutination assays on Immucor automated instruments. CMT Plates are composed of micro-wells coated to block the nonspecific adsorption of red blood cells or serum proteins to the plastic wells. CMT Plates are supplied in a plate format. Each plate has twelve strips on a support frame and each strip has eight micro-wells. Strips can be used individually or in multiples. This product configuration is forty (40) microplates.

This product is used in direct or indirect antiglobulin tests where the detection of IgG or C3 (as C3b or C3d) is required. This product contains a blend of murine monoclonal antibodies directed at the relevant human proteins, in proportions designed to achieve optimum proportions of anti-IgG, anti-C3d and anti-C3b. The package configuration for this product code is ten (10) vials of reagent. The color of the liquid reagent is clear.

This product is used in direct or indirect antiglobulin tests where the detection of IgG is required. This product contains a murine monoclonal antibodies directed at the relevant human proteins, in proportions designed to achieve optimum proportions of anti-IgG. The package configuration for this product code is ten (10) vials of reagent. The color of the liquid reagent is clear.

This product is used in direct or indirect antiglobulin tests where the detection of IgG is required. This product contains a murine monoclonal antibodies directed at the relevant human proteins, in proportions designed to achieve optimum proportions of anti-IgG. The package configuration for this product code is three (3) vials of reagent. The color of the liquid reagent is green.