SELECTOR HANDPIECE STERILIZATION TRAY:The steriliser tray provides a convenient handling system for sterilisation of re-usable devices.

CUSA® Selector® 24KHz Standard Fine Tip

CUSA® Selector® 35KHz Standard Fine Tip

CUSA® Selector® 24KHz Extended Fine Tip

CUSA® Selector® 35KHz Extended Fine Tip

CUSA® Selector® 24kHz Laparascopic Flue (Pack of 10)

CUSA® Selector® 24KHz Angled Extension Shroud

CUSA® Selector® 24KHz Standard Flue (Pack of 20)

CUSA® Selector® 35KHzStandard Flue (Pack of 20)

Neurosurgical Long Extension Shroud: The shrouds are intended to direct the saline irrigation fluid to the site of operation. Shroud Black heat resistant shrouds that are interconnected by snap-in push fittings with the exception of the laparoscopic handpiece which has a screw thread joint. The shrouds cover one or two titanium alloy parts. All handpieces contain a tip. Angled handpieces also include an angled extension.

CUSA® Selector® 24KHz Neuro Short Flue (Pack of 20)

CUSA® Selector® 24KHz Neuro long Flue(Pack of 20)

CUSA® Selector® 24KHz Ultrafine Micro Tip Set

CUSA® Selector® 35KHz Ultrafine Micro Tip Set

CUSA® Selector® 35KHz Microsurgical Ultrafine Tip Set

CUSA® Selector® 24KHz Ultrafine MicroTip

Only use the CUSA Selector wrench set to tighten and loosen tips and extensions on the handpiece. Always secure the handle of the handpiece in the holder provided. Never assemble or disassemble the handpiece by holding the handle in your hand as damage may occur to the handpiece. The CUSA Selector Wrench Set is intended for use with Standard handpieces.

Selector Wrench Set : The Selector Wrench Set consists of a stainless steel holder and spanner, connected by a chain. The Wrench set is used to assemble the handpiece and tip, and to change tips in the sterile field. The Wrench Set is also used to disassemble the handpiece for cleaning and sterilization. The cut-outs in the holder are sized according to its use with specific handpieces.The wrench sets are required to ensure the tips are attached to the hand pieces correctly.

Selector Wrench Set : The Selector Wrench Set consists of a stainless steel holder and spanner, connected by a chain. The Wrench set is used to assemble the handpiece and tip, and to change tips in the sterile field. The Wrench Set is also used to disassemble the handpiece for cleaning and sterilization. The cut-outs in the holder are sized according to its use with specific handpieces.The wrench sets are required to ensure the tips are attached to the hand pieces correctly.

CUSA® Selector® 35KHz Ultrafine MicroTip

CUSA® Selector® 35KHz Ultrafine MicroTip Set

CUSA® Selector® 35KHz Neuro Flue (Pack of 5)

CUSA® Selector® 24kHz Neuro Short Sterile Tip Set

The Tips are machined hollow tubes with fittings at the distal end which connect to the handpiece. They are manufactured from titanium alloy. The Tips deliver the mechanical motion to ablate the tissues then aspirate the waste fluid and suspended tissue pieces. The Flues are hollow cones. The Flues are intended to direct the saline irrigation fluid to the site of operation. They are manufactured from clear plastic.

CUSA® Selector® 24kHz Neuro Long Sterile Tip Set

CUSA® Selector® 35kHz Neuro Sterile Tip Set

The Tips are machined hollow tubes with fittings at the distal end which connect to the handpiece. They are manufactured from titanium alloy. The Tips deliver the mechanical motion to ablate the tissues then aspirate the waste fluid and suspended tissue pieces. The Flues are hollow cones. The Flues are intended to direct the saline irrigation fluid to the site of operation. They are manufactured from clear plastic.

CUSA® Selector® 24KHz Microsurgical Extension Flue (Pack of 20)

CUSA® Selector® 24KHz Microsurgical Ultrafine Tip Set

CUSA® Selector® 24KHz Microsurgical Ultrafine Tip Set

CUSA® Selector® 24KHz Microsurgical Ultrafine Tip

CUSA® Selector® 24KHz Microsurgical Ultrafine Tip Set

CUSA® Selector® 24kHz Microsurgical Sterile Tip Set

The Tips are machined hollow tubes with fittings at the distal end which connect to the handpiece. They are manufactured from titanium alloy. The Tips deliver the mechanical motion to ablate the tissues then aspirate the waste fluid and suspended tissue pieces. The Flues are hollow cones. The Flues are intended to direct the saline irrigation fluid to the site of operation. They are manufactured from clear plastic.

Use only Integra-supplied 14.4 V lithium ion battery for LICOX and CAMINO monitors. Charge time = No more than 5 hours, while the monitor is plugged into an AC power outlet and the monitor is turned off. Operation time = 1.5 hours.

CUSA® Clarity Ultrasonic Surgical Aspirator System

CUSA® Clarity Custom Cart

CUSA® Clarity Footswitch

CUSA® Clarity Contamination Guard

CUSA® Clarity Handpiece, Cleaning Brush

CUSA® Clarity Sterilization Tray

CUSA® Clarity Quick Connect Cartridge and Tubing Set

CUSA® Clarity Quick Connect Cartridge and Tubing Set

CUSA® Clarity 36kHz Torque Wrench

CUSA® Clarity 36kHz Torque Wrench

Camino® USB-to-RS232 Adapter Cable

The Integra Camino Flex Adapter is designed as an accessory to connect the Integra Camino Flex Catheters (Integra LifeSciences Corporation) with the Camino Advanced Monitor (CAM01) for the direct and continuous measurement of intracranial pressure (ICP). It is a reusable device with an accessory holder which allows the Integra Camino Flex Adapter to be permanently attached to the Camino Advanced Monitor.

The Integra Camino Flex Extension Cable is used to connect the Integra Camino Flex Catheter to the Integra Camino ICP Monitor. It is an eight foot long silicone cable, with circular PEI (polyetherimide) connectors and a Ferrite clamp on suppressor.

Integra® Licox® PtO2 Monitor

Camino® 18 V DC, 1.67A, 30 W AC Power Adapter