Intended for use as a device for holding adhesive brush tips or A2/C&C aligner attachment moulds.

Assure® Universal Bonding Resin is hydrophilic so the etched enamel can be dry or slightly contaminated with saliva. Assure® Universal Bonding Resindoes not require light activation (except on dentin). It can be used under any chemical, light cure or dual cure paste, regardless of manufacturer.This is the 4 gm volume..

Light Bond is intended for use as a light cure bracket and lingual retainer adhesive. Light Bond™ LIGHT CURE SEALANT AND BRACKET BONDING SYSTEM KIT WITH FLUORIDE PRODUCT FEATURES:SMOOTH, TACKY PASTE VISCOSITY: The viscosity of Light Bond™ Regular Paste is very tacky whichhelps prevent bracket flotation. NO MIXING - UNLIMITED WORKING TIME: Light Bond™ is a photo initiated adhesive that offers theoperator unlimited working time to position brackets and clean flash.BONDS TO METAL, CERAMIC & COMPOSITE SURFACES: Light Bond™ will bond to any enamel,porcelain, composite or metal surface, when properly conditioned.This is the two syringe kit configuration, NonFluoride

Light Bond is intended for use as a light cure bracket and lingual retainer adhesive. Light Bond™ LIGHT CURE SEALANT AND BRACKET BONDING SYSTEM KIT WITH FLUORIDE PRODUCT FEATURES:SMOOTH, TACKY PASTE VISCOSITY: The viscosity of Light Bond™ Regular Paste is very tacky whichhelps prevent bracket flotation. NO MIXING - UNLIMITED WORKING TIME: Light Bond™ is a photo initiated adhesive that offers theoperator unlimited working time to position brackets and clean flash.BONDS TO METAL, CERAMIC & COMPOSITE SURFACES: Light Bond™ will bond to any enamel,porcelain, composite or metal surface, when properly conditioned.This is the 2 syringe kit configuration

Rely•a•Bond® is intended for use in bonding metal, composite and ceramic orthodontic brackets.Kit contains 2 x Rely A Bond Adhesive Paste Push syringes, 8g Primer with fluoride,9 gm liquid etchant, mixing pad, mixing well, spatulas and brushes.

Rely•a•Bond® is intended for use in bonding metal, composite andceramic orthodontic brackets.This is a 8g bottle of Rely A Bond primer with fluoride

Band-Lok® is a two paste dual-cure adhesive intended for use as a band cement.Band-Lok Product Features:No messy Powder-Liquid Systems. Consistent mix viscosity every timeUnlike Glass Monomer cements, Band-Lok does not have an aftertaste or odor.Better adhesion to enamel and band surfaces is achieved, reducing washout and preventing loose bandsFour minute working time at room temperature without a frozen slab.Band-Lok is a Dual Cure cement. It can be used with or without a dental curing light. When band is placed and flash is cleaned a 20 second light activation allows full protection from moisture. Without light activation a complete set is achieved in 10 minutes.Superior Adhesion/Reduced Washout: Band-Lok is a unique combination of Resin and Glass Ionomer technology.Band-Lok is Fluoride releasing.Contents of Kit:•(4) 6gm. Syringes of Part A Paste•(4) 6gm. Syringes of Part B Paste•Mixing Pads and Spatulas.

Band-Lok® is a two paste dual-cure adhesive intended for use as a band cement.Band-Lok Product Features:No messy Powder-Liquid Systems. Consistent mix viscosity every time.Unlike Glass Monomer cements, Band-Lok does not have an aftertaste or odor.Better adhesion to enamel and band surfaces is achieved, reducing washout and preventing loose bands.Four minute working time at room temperature without a frozen slab.Band-Lok is a Dual Cure cement. It can be used with or without a dental curing light. When band is placed and flash is cleaned a 20 second light activation allows full protection from moisture. Without light activation a complete set is achieved in 10 minutes.Superior Adhesion/Reduced Washout: Band-Lok and Ultra Band-Lok are a unique combination of Resin and Glass Ionomer technology.Band-Lok is Fluoride releasing.Contents of Kit:•(4) 6gm. Syringes of Part A Blue Paste•(4) 6gm. Syringes of Part B Paste•Mixing Pads and Spatulas.

BandLok is intended for use as a chemical cure band cement.This is the 6 gm syringe of Part A, natural shade.

BandLok is intended for use as a chemical cure band cement.This is the 6 gm syringe of BandLok Part A, Blue Shade.

BandLok is intended for use as a chemical cure band cement.This is the 6 gm syringe of Part B.

Bend A Brushes are intended for use in the application of dental resins, sealants and etchants to the tooth surface.This is the tip option that fits in a Brush Handle.

This kit is used for extrusion of teeth. This is a chemical cure self mix kit containing 3 Oval Attachments with Chain and 2 Pad Attachments with Chain, Excel Regular Self Mix syringe and Assure Bonding Resin.

This product is intended for use by a dental professional for extrusion of an impacted tooth. Kit contains 3 Oval Attachments with Chain and 2 Pad Attachments with Chain, Flowtain adheisve and Assure Universal Bonding Resin.

Intended use: This oval attachment is used for extrusion of teeth.

This pad attachment is intended for use in extrusion of teeth.

The ACCESS™ Cheek Retractors are intended for use in pulling the cheeks back from the buccal and labial surfaces of the teeth during orthodontic procedures. Adult Size - Special posterior pads comfortably hold the cheeks away and allow excellent "accessibility" to the bicuspid and molar area. Spring stainless steel bow allows for adjustment and pivot points provide greater comfort.

The ACCESS™ Cheek Retractors are intended for use in pulling the cheeks back from the buccal and labial surfaces of the teeth during orthodontic procedures. Pediatric Size - Special posterior pads comfortably hold the cheeks away and allow excellent "accessibility" to the bicuspid and molar area. Spring stainless steel bow allows for adjustment and pivot points provide greater comfort.

INDICATIONS FOR USE: Custom IQ™ is intended for use as a chair-side, fast set, no mix chemical cure bonding resin for custom base indirect bonding.This is the Part A of the two part system.

INDICATIONS FOR USE: Custom IQ™ is intended for use as a chair-side, fast set, no mix chemical cure bonding resin for custom base indirect bonding.This is Part B of the two part system

Crown Lok™ is intended for use as a cement for metal crowns and orthodontic bands. Crown Lok Kit contains (4) 6gm Screw Paste A Syringes and (4) 6gm Screw Paste B Syringes and a 9gm etch. Crown Lok is a self-curing two minute working time fluoride releasing cement.

Crown Lok™ Blue is intended for use as a cement for metal crowns and orthodontic bands. Crown Lok is a self-curing two minute working time fluoride releasing cement. Crown Lok Kit contains (4) 6gm Screw Blue Paste A Syringes and (4) 6gm Screw Paste B Syringes and a 9gm etch.

Crown Lok is intended for as a chemical cure crown cement.1 X 6g Crown Lok Paste A in syringe, natural shade

Crown Lok™ Blue is intended for use as a cement for metal crowns and orthodontic bands. Crown Lok is a self-curing two minute working time fluoride releasing cement. This is 6gm Screw Blue Paste A Syringe

Crown Lok™ is intended for use as a cement for metal crowns and orthodontic bands. This is a 6gm Screw Paste B Syringe

The Mark II CR Syringe is intended for use as a dispensing mechanism for adhesive tips.

INDICATIONS FOR USE: The Renew® Finishing System is intended for use in the removal of composite paste after debonding and polishing of the surface of enamel, porcelain, metal or composite.Renew Diamond Burs #129 A medium abrasion diamond bur recommended for roughening and preparing plastic, composite restorations and metal surfaces.

Tried and True (TNT) Damon Beta Titanium Lower Archwires 16x22

Tried and True (TNT) Damon Beta Titanium Lower Archwires 17 x 25

Tried and True (TNT) Damon Beta Titanium Lower Archwires Size 0.018 x 0.025 inches

Tried and True (TNT) Damon Beta Titanium Lower Archwires 19 x 25

Tried and True (TNT) Damon Beta Titanium Lower Archwires 21 x 25

Tried and True (TNT) Damon Beta Titanium Upper Archwires 16x22

Tried and True (TNT) Damon Beta Titanium Upper Archwires17 x 25

Tried and True (TNT) Damon Beta Titanium Upper Archwires Size 0.018 x 0.025 inches

Tried and True (TNT) Damon Beta Titanium Upper Archwires 19 x 25

Tried and True (TNT) Damon Beta Titanium Upper Archwires 21 x 25

This kit is used for extrusion of teeth. This is a chemical cure self mix kit containing 3 Disposable Oval Attachments with Chain and 2 Disposable Pad Attachments with Chain, Excel Regular Self Mix syringe and Assure Bonding Resin.

The C&C system is intended for use by a dental professional for extrusion of an impacted tooth. Kit contains 3 Disposable Oval Attachments with Chain and 2 Disposable Pad Attachments with Chain, Flowtain adhesive and Assure Universal Bonding Resin.

The C&C Kit is intended for use by a dental professional for the extrusion of impacted teeth.This is a disposable oval attachment with C&C chain.

The C&C System is intended for use by a dental professional for the extrusion of impacted teeth.This is a disposable pad attachment with C&C Chain.

PhaseII® Dual Cure is intended for use as an orthodontic adhesive for direct and indirect bonding. Contains Phase II Dual Cure adhesive paste Part A with Fluoride in 18g jar.

PhaseII® Dual Cure is intended for use as an orthodontic adhesive for direct and indirect bonding. Phase II®DUAL CURE combines the best of both chemical and light cure polymerization. The chemical cure working time is 4 minutes to allow several brackets to be set and positioned from one mix. An initial set can be immediately achieved by light curing from any angle for 10 seconds. This will prevent the loss of bond strength due to saliva contamination. This unique dual cure process allows complete polymerization under metal brackets where the light does not reach. When an immediate final set is desired, simply light cure a metal or ceramic bracket for 30 seconds. This kit contains paste in 18g jars A & B and 2 X 3cc Sealant Resin and 1 9g etchant. Contains Fluoride

PhaseII® Dual Cure is intended for use as an orthodontic adhesive for direct and indirect bonding. This kit contains 3 X 6g Phase II Pastes A with Fluoride & B in screw syringes, 2 X 3cc Light Bond Sealant Resins and 1x 9g liquid etchant with and mixing accessories. Kit contains fluoride.

Tried and True (TNT) (Heaters) Damon Heat Activated Copper Nickel Titanium Lower Archwires Size 0.012 inches

Tried and True (TNT) (Heaters) Damon Heat Activated Copper Nickel Titanium Pre-Stopped Lower Archwires Size 0.012 inches

Tried and True (TNT) (Heaters) Damon Heat Activated Copper Nickel Titanium Lower Archwires Size 0.013 inches

Tried and True (TNT) (Heaters) Damon Heat Activated Copper Nickel Titanium Pre-Stopped Lower Archwires Size 0.013 inches

Tried and True (TNT) (Heaters) Damon Heat Activated Copper Nickel Titanium Lower Archwires Size 0.014 inches

Tried and True (TNT) (Heaters) Damon Heat Activated Copper Nickel Titanium Pre-Stopped Lower Archwires Size 0.014 inches