The CINTAS CPR ISO-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Large barrier surface area, 7" X 7" (17.5 cm X 17.5 cm), maximizes isolation between rescuer and patient. The barrier material is attached to a short bite block containing TWO (2) silicone valves which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilations much easier when doing the head tilt/chin lift procedure. The short bite block, 2 cm in length reduces the risk of pushing the patient's tongue back and does not require a prescription Two grips extend away from the bite block to provide a means to help the rescuer hold the small bite bloc and also help release the barrier from the patient's face between resuscitation breaths. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. ISO-SHIELD (TM) of Rondex MADE IN USA

The CINTAS CPR ISO-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Large barrier surface area, 7" X 7" (17.5 cm X 17.5 cm), maximizes isolation between rescuer and patient. The barrier material is attached to a short bite block containing TWO (2) silicone valves which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilations much easier when doing the head tilt/chin lift procedure. The short bite block, 2 cm in length reduces the risk of pushing the patient's tongue back and does not require a prescription Two grips extend away from the bite block to provide a means to help the rescuer hold the small bite bloc and also help release the barrier from the patient's face between resuscitation breaths. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. ISO-SHIELD (TM) of Rondex MADE IN USA

The CINTAS CPR ISO-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Large barrier surface area, 7" X 7" (17.5 cm X 17.5 cm), maximizes isolation between rescuer and patient. The barrier material is attached to a short bite block containing TWO (2) silicone valves which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilations much easier when doing the head tilt/chin lift procedure. The short bite block, 2 cm in length reduces the risk of pushing the patient's tongue back and does not require a prescription Two grips extend away from the bite block to provide a means to help the rescuer hold the small bite bloc and also help release the barrier from the patient's face between resuscitation breaths. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. ISO-SHIELD (TM) of Rondex MADE IN USA

The RONDEX CPR VALVE Model #2020 is for emergency used only with a suitable CPR mask to help isolate the patient's breath from the rescuer. . It has a single flapper valve which stays flexible under very cold conditions. Fits masks with 15 mm OD stem or 22 mm ID opening. Made in USA

The RONDEX CPR ISO-VALVE Model #4040 is for emergency used only with a suitable CPR mask. It contains a total of two (2) silicone valves to help isolate the rescuer from the patient's breath. Fits masks with 15 mm OD stem or 22 mm ID opening. Made in USA (ISO-VALVE(TM) of Rondex Products, Inc.)

The Rondex CPR ISO-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Large barrier surface area, 7" X 7" (17.5 cm X 17.5 cm), maximizes isolation between rescuer and patient. The barrier material is attached to a short bite block containing TWO (2) silicone valves which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilations much easier when doing the head tilt/chin lift procedure. The short bite block, 2 cm in length reduces the risk of pushing the patient's tongue back and does not require a prescription Two grips extend away from the bite block to provide a means to help the rescuer hold the small bite bloc and also help release the barrier from the patient's face between resuscitation breaths. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. ISO-SHIELD (TM) of Rondex MADE IN USA

The Rondex CPR Pocket Rescue Mask, Model #9120, is for emergency mouth-to-mask ventilation on a non-breathing adult or child. There is a silicone valve inside the valve housing to help isolate the patient's breath from the rescuer. The mask has a unique design (Design Registered) that even allows rescuers with small hands or rescuers with wet hands a more comfortable means to hold the mask. The mask can be folded down and stored in the plastic clamshell case along with the valve. Made In USA

The Rondex CPR Pocket Rescue Mask, Model #9120-PB, is for emergency mouth-to-mask ventilation on a non-breathing adult or child. There is a silicone valve inside the valve housing to help isolate the patient's breath from the rescuer. The mask has a unique design (Design Registered) that even allows rescuers with small hands or rescuers with wet hands a more comfortable means to hold the mask. The mask can be folded down and stored in the poly-bag along with the valve. Made In USA

The Rondex CPR Pocket Rescue Mask, Model #9140, is for emergency mouth-to-mask ventilation on a non-breathing adult or child. There are two (2) silicone valves inside the valve housing to help isolate the patient's breath from the rescuer. The mask has a unique design (Design Registered) that even allows rescuers with small hands or rescuers with wet hands a more comfortable means to hold the mask. The mask can be folded down and stored in the plastic clamshell case along with the valve. Made In USA

The Rondex CPR Pocket Rescue Mask, Model #9140-PB, is for emergency mouth-to-mask ventilation on a non-breathing adult or child. There are two (2) silicone valves inside the valve housing to help isolate the patient's breath from the rescuer. The mask has a unique design (Design Registered) that even allows rescuers with small hands or rescuers with wet hands a more comfortable means to hold the mask. The mask can be folded down and stored in the plastic poly-bag along with the valve. Made In USA

The Rondex CPR Pocket Rescue Mask, Model #91402 with an oxygen inlet stem, is for emergency mouth-to-mask ventilation on a non-breathing adult or child. There are two (2) silicone valves inside the valve housing to help isolate the patient's breath from the rescuer. The mask has a unique design (Design Registered) that even allows rescuers with small hands or rescuers with wet hands a more comfortable means to hold the mask. The mask can be folded down and stored in the plastic clamshell case along with the valve. Made In USA

The Rondex CPR ISO-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Large barrier surface area, 7" X 7" (17.5 cm X 17.5 cm), maximizes isolation between rescuer and patient. The barrier material is attached to a short bite block containing TWO (2) silicone valves which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilations much easier when doing the head tilt/chin lift procedure. The short bite block, 2 cm in length reduces the risk of pushing the patient's tongue back and does not require a prescription Two grips extend away from the bite block to provide a means to help the rescuer hold the small bite bloc and also help release the barrier from the patient's face between resuscitation breaths. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. ISO-SHIELD (TM) of Rondex MADE IN USA

The Rondex CPR ISO-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Large barrier surface area, 7" X 7" (17.5 cm X 17.5 cm), maximizes isolation between rescuer and patient. The barrier material is attached to a short bite block containing TWO (2) silicone valves which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilations much easier when doing the head tilt/chin lift procedure. The short bite block, 2 cm in length reduces the risk of pushing the patient's tongue back and does not require a prescription Two grips extend away from the bite block to provide a means to help the rescuer hold the small bite bloc and also help release the barrier from the patient's face between resuscitation breaths. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. ISO-SHIELD (TM) of Rondex MADE IN USA

The Rondex CPR ISO-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Large barrier surface area, 7" X 7" (17.5 cm X 17.5 cm), maximizes isolation between rescuer and patient. The barrier material is attached to a short bite block containing TWO (2) silicone valves which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilations much easier when doing the head tilt/chin lift procedure. The short bite block, 2 cm in length reduces the risk of pushing the patient's tongue back and does not require a prescription Two grips extend away from the bite block to provide a means to help the rescuer hold the small bite bloc and also help release the barrier from the patient's face between resuscitation breaths. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. ISO-SHIELD (TM) of Rondex MADE IN USA

The Rondex CPR ISO-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Large barrier surface area, 7" X 7" (17.5 cm X 17.5 cm), maximizes isolation between rescuer and patient. The barrier material is attached to a short bite block containing TWO (2) silicone valves which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilations much easier when doing the head tilt/chin lift procedure. The short bite block, 2 cm in length reduces the risk of pushing the patient's tongue back and does not require a prescription Two grips extend away from the bite block to provide a means to help the rescuer hold the small bite bloc and also help release the barrier from the patient's face between resuscitation breaths. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. ISO-SHIELD (TM) of Rondex Products, Inc. MADE IN USA

The Rondex CPR ISO-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Large barrier surface area, 7" X 7" (17.5 cm X 17.5 cm), maximizes isolation between rescuer and patient. The barrier material is attached to a short bite block containing TWO (2) silicone valves which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilations much easier when doing the head tilt/chin lift procedure. The short bite block, 2 cm in length reduces the risk of pushing the patient's tongue back and does not require a prescription Two grips extend away from the bite block to provide a means to help the rescuer hold the small bite bloc and also help release the barrier from the patient's face between resuscitation breaths. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. ISO-SHIELD (TM) of Rondex MADE IN USA

The Rondex CPR ISO-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Large barrier surface area, 7" X 7" (17.5 cm X 17.5 cm), maximizes isolation between rescuer and patient. The barrier material is attached to a short bite block containing TWO (2) silicone valves which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilations much easier when doing the head tilt/chin lift procedure. The short bite block, 2 cm in length reduces the risk of pushing the patient's tongue back and does not require a prescription Two grips extend away from the bite block to provide a means to help the rescuer hold the small bite bloc and also help release the barrier from the patient's face between resuscitation breaths. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. ISO-SHIELD (TM) of Rondex MADE IN USA

The Rondex CPR REDI-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Barrier surface area (6" X 6") helps isolate the rescuer from the patient. The barrier material is attached to a short bite block containing one (1) silicone valve which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilation much easier when doing the head tilt/chin lift procedure. The short bite block, 1/2" in length, reduces the risk of pushing the patient's tongue back and does not require a prescription. The REDI-SHIELD with a bite block advantage is very compact and is ideal for unitized packaging in first aid kits and key ring cases. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. REDI-SHIELD(TM) of Rondex MADE IN USA.

The Rondex CPR REDI-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Barrier surface area (6" X 6") helps isolate the rescuer from the patient. The barrier material is attached to a short bite block containing one (1) silicone valve which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilation much easier when doing the head tilt/chin lift procedure. The short bite block, 1/2" in length, reduces the risk of pushing the patient's tongue back and does not require a prescription. The REDI-SHIELD with a bite block advantage is very compact and is ideal for unitized packaging in first aid kits and key ring cases. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. REDI-SHIELD(TM) of Rondex MADE IN USA

The Rondex CPR REDI-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Barrier surface area (6" X 6") helps isolate the rescuer from the patient. The barrier material is attached to a short bite block containing one (1) silicone valve which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilation much easier when doing the head tilt/chin lift procedure. The short bite block, 1/2" in length, reduces the risk of pushing the patient's tongue back and does not require a prescription. The REDI-SHIELD with a bite block advantage is very compact and is ideal for unitized packaging in first aid kits and key ring cases. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. REDI-SHIELD(TM) of Rondex MADE IN USA.

The Rondex CPR REDI-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Barrier surface area (6" X 6") helps isolate the rescuer from the patient. The barrier material is attached to a short bite block containing one (1) silicone valve which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilation much easier when doing the head tilt/chin lift procedure. The short bite block, 1/2" in length, reduces the risk of pushing the patient's tongue back and does not require a prescription. The REDI-SHIELD with a bite block advantage is very compact and is ideal for unitized packaging in first aid kits and key ring cases. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. REDI-SHIELD(TM) of Rondex MADE IN USA.

The Rondex CPR REDI-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Barrier surface area (6" X 6") helps isolate the rescuer from the patient. The barrier material is attached to a short bite block containing one (1) silicone valve which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilation much easier when doing the head tilt/chin lift procedure. The short bite block, 1/2" in length, reduces the risk of pushing the patient's tongue back and does not require a prescription. The REDI-SHIELD with a bite block advantage is very compact and is ideal for unitized packaging in first aid kits and key ring cases. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. REDI-SHIELD(TM) of Rondex Products, Inc. MADE IN USA.

The Rondex CPR REDI-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Barrier surface area (6" X 6") helps isolate the rescuer from the patient. The barrier material is attached to a short bite block containing one (1) silicone valve which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilation much easier when doing the head tilt/chin lift procedure. The short bite block, 1/2" in length, reduces the risk of pushing the patient's tongue back and does not require a prescription. The REDI-SHIELD with a bite block advantage is very compact and is ideal for unitized packaging in first aid kits and key ring cases. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. REDI-SHIELD(TM) of Rondex MADE IN USA.

The HSI CPR REDI-SHIELD model #9850-G comes in a zipper case with a key ring and gloves. It is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Barrier surface area (6" X 6") helps isolate the rescuer from the patient. The barrier material is attached to a short bite block containing one (1) silicone valve which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilation much easier when doing the head tilt/chin lift procedure. The short bite block, 1/2" in length, reduces the risk of pushing the patient's tongue back and does not require a prescription. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. REDI-SHIELD(TM) of Rondex MADE IN USA.

The Rondex CPR REDI-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Barrier surface area (6" X 6") helps isolate the rescuer from the patient. The barrier material is attached to a short bite block containing one (1) silicone valve which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilation much easier when doing the head tilt/chin lift procedure. The short bite block, 1/2" in length, reduces the risk of pushing the patient's tongue back and does not require a prescription. The REDI-SHIELD with a bite block advantage is very compact and is ideal for unitized packaging in first aid kits and key ring cases. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. REDI-SHIELD(TM) of Rondex MADE IN USA.

The Rondex CPR REDI-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Barrier surface area (6" X 6") helps isolate the rescuer from the patient. The barrier material is attached to a short bite block containing one (1) silicone valve which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilation much easier when doing the head tilt/chin lift procedure. The short bite block, 1/2" in length, reduces the risk of pushing the patient's tongue back and does not require a prescription. The REDI-SHIELD with a bite block advantage is very compact and is ideal for unitized packaging in first aid kits and key ring cases. This device is for emergency us only and should only be used by persons properly trained in CPR and in the use of this device. REDI-SHIELD(TM) of Rondex MADE IN USA.

The RONDEX CPR REDI-SHIELD model #9850-G comes in a case with a key ring and gloves. It is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Barrier surface area (6" X 6") helps isolate the rescuer from the patient. The barrier material is attached to a short bite block containing one (1) silicone valve which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilation much easier when doing the head tilt/chin lift procedure. The short bite block, 1/2" in length, reduces the risk of pushing the patient's tongue back and does not require a prescription. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. REDI-SHIELD(TM) of Rondex MADE IN USA.

The Rondex CPR ISO-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Large barrier surface area, 7" X 7" (17.5 cm X 17.5 cm), maximizes isolation between rescuer and patient. The barrier material is attached to a short bite block containing TWO (2) silicone valves which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilations much easier when doing the head tilt/chin lift procedure. The short bite block, 2 cm in length reduces the risk of pushing the patient's tongue back and does not require a prescription Two grips extend away from the bite block to provide a means to help the rescuer hold the small bite bloc and also help release the barrier from the patient's face between resuscitation breaths. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. ISO-SHIELD (TM) of Rondex Products, Inc. MADE IN USA

The Rondex CPR ISO-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Large barrier surface area, 7" X 7" (17.5 cm X 17.5 cm), maximizes isolation between rescuer and patient. The barrier material is attached to a short bite block containing TWO (2) silicone valves which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilations much easier when doing the head tilt/chin lift procedure. The short bite block, 2 cm in length reduces the risk of pushing the patient's tongue back and does not require a prescription Two grips extend away from the bite block to provide a means to help the rescuer hold the small bite bloc and also help release the barrier from the patient's face between resuscitation breaths. This device is for emergency us only and should only be used by persons properly trained in CPR and in the use of this device. ISO-SHIELD (TM) of Rondex MADE IN USA

The Rondex CPR REDI-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Barrier surface area (6" X 6") helps isolate the rescuer from the patient. The barrier material is attached to a short bite block containing one (1) silicone valve which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilation much easier when doing the head tilt/chin lift procedure. The short bite block, 1/2" in length, reduces the risk of pushing the patient's tongue back and does not require a prescription. The REDI-SHIELD with a bite block advantage is very compact and is ideal for unitized packaging in first aid kits and key ring cases. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. REDI-SHIELD(TM) of Rondex MADE IN USA.

The Rondex CPR REDI-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Barrier surface area (6" X 6") helps isolate the rescuer from the patient. The barrier material is attached to a short bite block containing one (1) silicone valve which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilation much easier when doing the head tilt/chin lift procedure. The short bite block, 1/2" in length, reduces the risk of pushing the patient's tongue back and does not require a prescription. The REDI-SHIELD with a bite block advantage is very compact which makes it ideal for key ring cases. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. REDI-SHIELD(TM) of Rondex MADE IN USA.

The Rondex CPR REDI-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Barrier surface area (6" X 6") helps isolate the rescuer from the patient. The barrier material is attached to a short bite block containing one (1) silicone valve which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilation much easier when doing the head tilt/chin lift procedure. The short bite block, 1/2" in length, reduces the risk of pushing the patient's tongue back and does not require a prescription. The REDI-SHIELD with a bite block advantage is very compact and is ideal for keying pocket cases. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. REDI-SHIELD(TM) of Rondex MADE IN USA.

The Rondex CPR REDI-SHIELD is a mouth-to-mask barrier device used to help a rescuer avoid direct contact with the patient when doing resuscitation. Barrier surface area (6" X 6") helps isolate the rescuer from the patient. The barrier material is attached to a short bite block containing one (1) silicone valve which helps to isolate the patient's breath from the rescuer. The bite block helps to keep the barrier positioned correctly while keeping the patient's mouth open. This makes ventilation much easier when doing the head tilt/chin lift procedure. The short bite block, 1/2" in length, reduces the risk of pushing the patient's tongue back and does not require a prescription. The REDI-SHIELD with a bite block advantage is very compact and is ideal for unitized packaging in first aid kits and key ring cases. This device is for emergency use only and should only be used by persons properly trained in CPR and in the use of this device. REDI-SHIELD(TM) of Rondex MADE IN USA.