The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.

The VERTACONNECT TLIF Spreadable Lumbar Cage is a spacer for implantation in aprepared intervertebral disc space of the lumbar spine. Its design offers stable contact surfaces, toothed implant/bone surfaces and large cage windows. The open implant design supports a bony construction of the intervertebral disc space. The implants consist of a cage and a pre-assembled expansion element.

The VERTACONNECT TLIF Spreadable Lumbar Cage is a spacer for implantation in aprepared intervertebral disc space of the lumbar spine. Its design offers stable contact surfaces, toothed implant/bone surfaces and large cage windows. The open implant design supports a bony construction of the intervertebral disc space. The implants consist of a cage and a pre-assembled expansion element.

The VERTACONNECT TLIF Spreadable Lumbar Cage is a spacer for implantation in aprepared intervertebral disc space of the lumbar spine. Its design offers stable contact surfaces, toothed implant/bone surfaces and large cage windows. The open implant design supports a bony construction of the intervertebral disc space. The implants consist of a cage and a pre-assembled expansion element.

An orthopedic manual surgical instrument is a nonpowered hand-held device intended for medical purposes to manipulate tissue, or for use with other devices in orthopedic surgery.

An orthopedic manual surgical instrument is a nonpowered hand-held device intended for medical purposes to manipulate tissue, or for use with other devices in orthopedic surgery.

An orthopedic manual surgical instrument is a nonpowered hand-held device intended for medical purposes to manipulate tissue, or for use with other devices in orthopedic surgery.

The SACRONAIL system provides a sustained, stable restoration of dorsal pelvic fractures and sacral fractures through its intraosseous location and its direct, bi-iliac symmetric anchorage. The implant consists of a nail of various lengths from135mm to 194mm with a constant diameter of 8mm and 2 locking screws in different lengths. This variation ensures adaptation to the respective anatomy of the patient. The intersections of the screw axes to the implant axis have a distance of 15mm to the respective end face of the nail. This ensures a solid support on the lateral cortex of the Ilia. The angle of the screw axes to the implant axis corresponds to the anatomical conditions and is 70°. The locking screw ensures a stable connection of the components. The tips of the locking screws are rounded to facilitate insertion into the nail while the dorsal ends of locking screws are a hexagon. The caps serve to close the instrument connection of the nail. The implants are made from the Titanium alloy (Ti6Al4V) according to ASTM F 136 / ISO 5832-3, with a Type II anodization according to AMS 2488. There are Instruments which are specific to the implantation of the SACRONAIL device. These include, but are not limited to, the Guide Frame, the Guide Bracket, the Fixation Bracket, various Instrument Guides, various dilators and drills, screwdrivers as well as the specific tools for revision of the device.

The SACRONAIL system provides a sustained, stable restoration of dorsal pelvic fractures and sacral fractures through its intraosseous location and its direct, bi-iliac symmetric anchorage. The implant consists of a nail of various lengths from135mm to 194mm with a constant diameter of 8mm and 2 locking screws in different lengths. This variation ensures adaptation to the respective anatomy of the patient. The intersections of the screw axes to the implant axis have a distance of 15mm to the respective end face of the nail. This ensures a solid support on the lateral cortex of the Ilia. The angle of the screw axes to the implant axis corresponds to the anatomical conditions and is 70°. The locking screw ensures a stable connection of the components. The tips of the locking screws are rounded to facilitate insertion into the nail while the dorsal ends of locking screws are a hexagon. The caps serve to close the instrument connection of the nail. The implants are made from the Titanium alloy (Ti6Al4V) according to ASTM F 136 / ISO 5832-3, with a Type II anodization according to AMS 2488. There are Instruments which are specific to the implantation of the SACRONAIL device. These include, but are not limited to, the Guide Frame, the Guide Bracket, the Fixation Bracket, various Instrument Guides, various dilators and drills, screwdrivers as well as the specific tools for revision of the device.

An orthopedic manual surgical instrument is a nonpowered hand-held device intended for medical purposes to manipulate tissue, or for use with other devices in orthopedic surgery.

An orthopedic manual surgical instrument is a nonpowered hand-held device intended for medical purposes to manipulate tissue, or for use with other devices in orthopedic surgery.

An orthopedic manual surgical instrument is a nonpowered hand-held device intended for medical purposes to manipulate tissue, or for use with other devices in orthopedic surgery.