The Cascadion™ SM 25-Hydroxy Vitamin D Assay is for the determination of total 25-Hydroxy Vitamin D (25-OH Vit D) in human serum through the quantitative measurement and combination of 25-Hydroxy Vitamin D3 and 25-Hydroxy Vitamin D2 on the Cascadion™ SM Clinical Analyzer. This liquid- chromatography – tandem mass spectrometry (LC-MS/MS) assay is to be used as an aid in the assessment of Vitamin D sufficiency.The Cascadion™ SM 25-Hydroxy Vitamin D Calibrators are for the calibration of the Cascadion SM 25-Hydroxy Vitamin D Assay on the Cascadion SM Clinical Analyzer.

The Cascadion™ SM 25-Hydroxy Vitamin D Assay is for the determination of total 25-Hydroxy Vitamin D (25-OH Vit D) in human serum through the quantitative measurement and combination of 25-Hydroxy Vitamin D3 and 25-Hydroxy Vitamin D2 on the Cascadion™ SM Clinical Analyzer. This liquid- chromatography – tandem mass spectrometry (LC-MS/MS) assay is to be used as an aid in the assessment of Vitamin D sufficiency.The Cascadion™ SM 25-Hydroxy Vitamin D Controls are for quality control of the Cascadion SM 25-Hydroxy Vitamin D Assay on the Cascadion SM Clinical Analyzer.

The Cascadion™ SM 25-Hydroxy Vitamin D Assay is for the determination of total 25-Hydroxy Vitamin D (25-OH Vit D) in human serum through the quantitative measurement and combination of 25-Hydroxy Vitamin D3 and 25-Hydroxy Vitamin D2 on the Cascadion™ SM Clinical Analyzer. This liquid- chromatography – tandem mass spectrometry (LC-MS/MS) assay is to be used as an aid in the assessment of Vitamin D sufficiency.The Cascadion™ SM 25-Hydroxy Vitamin D Controls are for quality control of the Cascadion SM 25-Hydroxy Vitamin D Assay on the Cascadion SM Clinical Analyzer.

The Cascadion™ SM 25-Hydroxy Vitamin D Assay is for the determination of total 25-Hydroxy Vitamin D (25-OH Vit D) in human serum through the quantitative measurement and combination of 25-Hydroxy Vitamin D3 and 25-Hydroxy Vitamin D2 on the Cascadion™ SM Clinical Analyzer. This liquid- chromatography – tandem mass spectrometry (LC-MS/MS) assay is to be used as an aid in the assessment of Vitamin D sufficiency.The Cascadion™ SM 25-Hydroxy Vitamin D Controls are for quality control of the Cascadion SM 25-Hydroxy Vitamin D Assay on the Cascadion SM Clinical Analyzer.

The Cascadion™ SM 25-Hydroxy Vitamin D Assay is for the determination of total 25-Hydroxy Vitamin D (25-OH Vit D) in human serum through the quantitative measurement and combination of 25-Hydroxy Vitamin D3 and 25-Hydroxy Vitamin D2 on the Cascadion™ SM Clinical Analyzer. This liquid-chromatography-tandem mass spectrometry (LC-MS/MS) assay is to be used as an aid in the assessment of Vitamin D sufficiency. This in vitro diagnostic device is intended for clinical laboratory use only.The Cascadion™ SM 25-Hydroxy Vitamin D Internal Standard is used to ensure the accuracy of the assay on the Cascadion™ SM Clinical Analyzer by correcting for systematic and random errors due to variations in sample preparation, chromatography, and detection. The Internal Standard is also used as a precipitating agent in the sample preparation method.

Buffer, TCA is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Entry, TCA is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Exit, TCA is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Conveyor 600, TCA is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Conveyor 1200, TCA is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Conveyor 1500, TCA is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Conveyor 1800, TCA is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Conveyor 2400, TCA is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

L-Turn, TCA is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Conveyor 900, TCA is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Conveyor 2100, TCA is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Decapper Flex, TCA is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Centrifuge Module, TCA is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Perpendicular Bypass, TCA Vitros 5.1 FS AT is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Internal U-Turn, TCA is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Z-Turn, right, TCA is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Z-Turn, left, TCA is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Aliquoter & Labeler, TCA is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Sysmex HST Interface, TCA is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Stago STA-R Interface, TCA is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Parallel Bypass, TCA Vitros 5.1 FS is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Parallel Bypass, TCA Beckman Unicel DxI 800 is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Recapper is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

ES Flex, TCA is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

U-Turn Mek is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

TCA 800 Interface for cobas 8000 is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Interface, TCA ARCHITECT i2000SR is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Interface, TCA ARCHITECT c8000 is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Parallel Bypass, TCA Olympus AU680DTS is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Parallel Bypass, TCA Tosoh is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Interface, TCA ImmunoCap 1000 is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

T-Turn, TCA is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Parallel Bypass, TCA IL ACL Top is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Parallel Bypass, TCA Liaison XL is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Perpendicular Bypass, TCA for Cold Storage Rack Loader is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Parallel Bypass, TCA Tosoh G8 is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Storage is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Loader is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Bulk Interface Module is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

Centrifuge Flex Module is a module of TCAutomation Laboratory Automation System. TCAutomation is a modular system used to automate the handling of sample tubes in the pre- and post- analytical steps of in vitro examination procedures, typically in combination with in vitro diagnostic medical devices.

For in vitro diagnostic use in the quantitative determination of the glucose concentration in human serum, plasma or urine on Konelab and Indiko analyzers.

Clinical Chemistry Analyzer

Clinical Chemistry Analyzer