KC 212-D Wye connector with one - 18mm ID/22mm OD nebulizer port x (3) 22mm OD ports. Fits components of adult ventilator circuits. Single Patient Use.

Reducing adapter for use in breathing/ventilator circuit. 22mm ID x 22mm OD. Molded of polystyrene butadiene. Single Patient Use.

KC 213-D Wye connector with (3) 22mm OD ports. Fits components of adult ventilator circuits. Single Patient Use.

The KC 5 Pressure Adapter: Dimensions - Luer Lock port x 15mm I.D./22mm O.D. x 15mm O/D.

The KC 6PA Pressure Adapter: Dimensions - Capped Luer Lock port x 15mm I.D. x 15mm I.D.

The KC 9-P with removable cap is designed for use on ventilators not equipped with expiratory hold. It allows single breath measurement of auto-PEEP in its use as a Braschi valve.Objectives of PEEP therapy: 1) increase functional residual capacity by maintaining a positive pressure throughout the ventilatory cycle - improves gas distribution,2) aid in the prevention of atelectasis via aveolar stinting, 3) decrease in the inspired oxygen fraction (FiO2) is an advantage, 4) help in the stabilization of flail chest condition, and 5) monitor tidal volume by connecting a spirometer to the outlet port.

The KM 030 Disposable Connector with LCD Thermometer is intended for use in a ventilator circuit, or a heated aerosol circuit. The LCD thermometer gives approximate temperature readings only and is not a substitute for definitive temperature monitoring. Dimensions: 22mm O.D. x 22mm I.D. Single Patient Use. Molded of High Density Polyethylene.

The MS 101-40 Pressure Adapter: Dimensions - Barbed Port fits 3/16" tubing x 15mm I.D. x 15mm I.D.

The MT 100 Oxygen Sensor Activation System is designed for use with the Maxtec Handi Oxygen Analyzer. By utilizing a check valve in the Tee Adapter, an airtight seal is maintained in-line, unless actuated by the stem of the activator. This system therefore provides the capability of rapid monitoring of the patient breathing environment without the inconvenience of breaking the ventilation circuit.

Reducing Adapter for use in breathing/ventilator circuit. - 22mm I.D. x 15mm I.D/22mm O.D. Molded of polycarbonate. Reusable.

NL 100 Breast Marker is used to assist in nipple placement during breast reconstructive surgery. A temporary impression is made by pressing the marker onto skin with a gentle rotating motion. Methylene blue may be used as a marking agent. The NL 100 Breast Marker provides two marking edges: 42 mm and 38 mm.

NP 1000-2D Bag Hanger mates with arm of O2 Instant Flow Valve to support a resuscitation bag. This is an accessory to the BE 3000 Series Oxygen Instant Flow Valves. Single Patient Use

Ventilator Tubing Accessory - Safety Strap helps to prevent disconnects by securing ventilator circuit components.

The NP 130-22 Pressure Adapter: Dimensions - Barbed port fits 1/4" I.D. tubing, x 15mm I.D./22mm O.D. x 22mm I.D. Barbed port is capped with a silicone rubber cap.

The Instrumentation Industries, Inc. NS Series Negative Inspiratory Force (NIF) Meters are devices used to measure and monitor patient inspiratory effort. During use the NIF Meter is attached to the patient airway at a point that provides optimal readings of patient respiratory effort. Federal law restricts these devices to sale by or on the order of a physician.

The Instrumentation Industries, Inc. NS Series Airway Pressure Monitors are devices used to monitor patient airway pressure during ventilation within a breathing circuit. The pressure gauge is placed in the patient circuit at a point that provides optimal airway pressure readings. These devices are intended to be used by or on the order of a physician.

The Instrumentation Industries, Inc. NS 120P-TRS Airway Pressure Monitor is a device used to monitor patient airway pressure during ventilation with a manual resuscitation device or bag/mask unit. This device is intended to be used by or on the order of a physician.

This reusable exhalation valve is designed for use with ventilators. The exhalation valve prevents the inspired gases from escaping through the passage that will be made available to expired gases via an inflatable balloon. Also, the re-breathing of the expired gases are prevented by the balloon action.

This reusable exhalation valve is designed for use with ventilators. The exhalation valve prevents the inspired gases from escaping through the passage that will be made available to expired gases via an inflatable balloon. Also, the re-breathing of the expired gases are prevented by the balloon action.

This reusable exhalation valve is designed for use with ventilators. The exhalation valve prevents the inspired gases from escaping through the passage that will be made available to expired gases via an inflatable balloon. Also, the re-breathing of the expired gases are prevented by the balloon action.

This reusable exhalation valve is designed for use with ventilators. The exhalation valve prevents the inspired gases from escaping through the passage that will be made available to expired gases via an inflatable balloon. Also, the re-breathing of the expired gases are prevented by the balloon action.

The Instrumentation Industries, Inc. NS Series Negative Inspiratory Force (NIF) Meters are devices used to measure and monitor patient inspiratory effort. During use the NIF Meter is attached to the patient airway at a point that provides optimal readings of patient respiratory effort. Federal law restricts these devices to sale by or on the order of a physician.

The Instrumentation Industries, Inc. NS Series Airway Pressure Monitors are devices used to monitor patient airway pressure during ventilation within a breathing circuit. The pressure gauge is placed in the patient circuit at a point that provides optimal airway pressure readings. These devices are intended to be used by or on the order of a physician.

The Instrumentation Industries, Inc. NS Series Negative Inspiratory Force (NIF) Meters are devices used to measure and monitor patient inspiratory effort. During use the NIF Meter is attached to the patient airway at a point that provides optimal readings of patient respiratory effort. Federal law restricts these devices to sale by or on the order of a physician.

The Instrumentation Industries, Inc. NS Series Airway Pressure Monitors are devices used to monitor patient airway pressure during ventilation within a breathing circuit. The pressure gauge is placed in the patient circuit at a point that provides optimal airway pressure readings. These devices are intended to be used by or on the order of a physician.

The Instrumentation Industries, Inc. NS Series Negative Inspiratory Force (NIF) Meters are devices used to measure and monitor patient inspiratory effort. During use the NIF Meter is attached to the patient airway at a point that provides optimal readings of patient respiratory effort. Federal law restricts these devices to sale by or on the order of a physician.

The Instrumentation Industries, Inc. NS Series Airway Pressure Monitors are devices used to monitor patient airway pressure during ventilation within a breathing circuit. The pressure gauge is placed in the patient circuit at a point that provides optimal airway pressure readings. These devices are intended to be used by or on the order of a physician.

The Instrumentation Industries, Inc. NS Series Negative Inspiratory Force (NIF) Meters are devices used to measure and monitor patient inspiratory effort. During use the NIF Meter is attached to the patient airway at a point that provides optimal readings of patient respiratory effort. Federal law restricts these devices to sale by or on the order of a physician.

The Instrumentation Industries, Inc. NS Series Airway Pressure Monitors are devices used to monitor patient airway pressure during ventilation within a breathing circuit. The pressure gauge is placed in the patient circuit at a point that provides optimal airway pressure readings. These devices are intended to be used by or on the order of a physician.

During ventilation, the NS Series Cuff Pressure Monitors are devices used to periodically monitor endotracheal or tracheostomy tube balloon pressure to assure an adequate seal between the tube and the tracheal wall.These devices are intended to be used by or on the order of a physician.

The Instrumentation Industries, Inc. NS Series Negative Inspiratory Force (NIF) Meters are devices used to measure and monitor patient inspiratory effort. During use the NIF Meter is attached to the patient airway at a point that provides optimal readings of patient respiratory effort. Federal law restricts these devices to sale by or on the order of a physician.

The Instrumentation Industries, Inc. NS Series Airway Pressure Monitors are devices used to monitor patient airway pressure during ventilation within a breathing circuit. The pressure gauge is placed in the patient circuit at a point that provides optimal airway pressure readings. These devices are intended to be used by or on the order of a physician.

During ventilation, the NS Series Cuff Pressure Monitors are devices used to periodically monitor endotracheal or tracheostomy tube balloon pressure to assure an adequate seal between the tube and the tracheal wall.These devices are intended to be used by or on the order of a physician.

The Instrumentation Industries, Inc. NS-GC Gauge Cover is an accessory to, and fits all, III NS-Series Vacuum/Pressure Gauges and NIF Meters. Shock absorbent material helps prevent gauge and crystal breakage.

The Instrumentation Industries, Inc. NS-GS Gauge Stand is an accessory to III NS-Series -PBR, -PBS, -TRR, -TRS Vacuum/Pressure Gaugesand NIF Meters. The NS-GS Gauge Stand helps make gauges easier to read, and keeps them upright. Gauges are easily and quickly inserted.

Reducing Connector - 22mm ID x 15mm ID. Fits components of adult ventilator circuits. Molded of silicone rubber. Reusable.

Straight Connector - 10mm ID x 10mm ID. Fits components of neonatal ventilator circuits. Molded of silicone rubber. Reusable.

Reducing Connector - 15mm ID x 10mm ID. Fits components of pediatric to neonatal ventilator circuits. Molded of silicone rubber. Reusable.

Straight Connector - 15mm ID x 15mm ID. Fits components of pediatric ventilator circuits. Molded of silicone rubber. Reusable.

This adapter connects to the exhalation valve for additional versatility.

This reusable exhalation valve is designed for use with ventilators. The exhalation valve prevents the inspired gases from escaping through the passage that will be made available to expired gases via an inflatable balloon. Also, the re-breathing of the expired gases are prevented by the balloon action.

This reusable exhalation valve is designed for use with ventilators. The exhalation valve prevents the inspired gases from escaping through the passage that will be made available to expired gases via an inflatable balloon. Also, the re-breathing of the expired gases are prevented by the balloon action.

The RB 001 Multi-Purpose rail-mounted slide bracket allows for a variety of mounting options. For use on Fairfield-style rails only, with equipment that requires a 1-1/8" x 3/16" mounting slot.

RB 002 Flexible Support Arm Compact Rail Mount Bracket permits mounting of "Flexible Support Arms" to Fairfield-style rails. Components and materials: bracket body: anodized aluminum; screw: steel with phenolic knob. Made in the USA.

The RB 004 Gauge Rail Clamp is an accessory to the NS Series Vacuum/Pressure Gauges. The RB 004 is used to securely mount Gauges with a rear 1/4" NPT thread to rails. For use with Fairfield-style rails only.

The Instrumentation Industries, Inc. RTC 15-D is an actuator for intermittent delivery of prescribed aerosol medication dispensed in metered dose inhalers. The RTC 15-D Adapter is intended for use only when connected to ventilator tubing or tracheal tubes. For use with metered dose inhaler canisters with standard size metal or plastic stems.The RTC 15-D Adapter is intended for Single Patient Reuse. This device is intended for sale by or on the order of a physician.

The Instrumentation Industries, Inc. RTC 15-P is an actuator for intermittent delivery of prescribed aerosol medication dispensed in metered dose inhalers. The RTC 15-P Adapter is intended for use only when connected to ventilator tubing or tracheal tubes. For use with metered dose inhaler canisters with standard size metal or plastic stems.The RTC 15-P Adapter is intended for Single Patient Reuse. This device is intended for sale by or on the order of a physician.

The Instrumentation Industries, Inc. RTC 21-A Metered Dose Inhaler Adapter is intended for use in intermittent aerosol therapy to deliver aerosol medications (in compressed canister MDIs) via the proximal end of an endotracheal tube.The RTC 21-A MDI Adapter is intended for reuse. This device is intended for sale by or on the order of a physician.

The Instrumentation Industries, Inc. RTC 21-D Metered Dose Inhaler Adapter is intended for use in intermittent aerosol therapy to deliver aerosol medications (in compressed canister MDIs) via the proximal end of an endotracheal tube.The RTC 21-D MDI Adapter is intended for single patient use.This device is intended for sale by or on the order of a physician.

The Instrumentation Industries, Inc. RTC 22-A is an actuator for intermittent delivery of prescribed aerosol medication dispensed in metered dose inhalers. The RTC 22-A Adapter is intended for use only when connected to ventilator tubing or tracheal tubes. For use with metered dose inhaler canisters with standard size metal or plastic stems.The RTC 22-A Adapter is intended for Single Patient Reuse. This device is intended for sale by or on the order of a physician.