The Captus Vascular Retrieval System consists of a flexible polyetheretherketone (PEEK) and Pebax shaft with a nitinol Braided Loop Snare (BLS) on the distal end. The device is designed to capture and retrieve foreign objects from the cardiovascular system. The lumen of the 120 cm long flexible snare shaft contains an inner rod that is secured to the BLS using an ultra-high molecular weight polyethylene (UHMWPE) braided suture. The external torquer is attached to the proximal end of the shaft and supports BLS manipulation. During the procedure, once the distal end has been positioned near the foreign object, the torquer can be turned clockwise (in relation to the shaft) in order to cinch the BLS. This feature allows the foreign object to be more firmly secured before its retrieval.

The Ellipsys® Power Controller is the reusable control unit for the Ellipsys® Vascular Access System. The Controller is a portable electronic console with AC power input, internal control electronics, a Catheter connection receptacle, and LCD display. The Controller delivers power to the Catheter heating element and guides the user through the procedure with visual prompts. The power controller is only compatible with the Avenu Medical Ellipsys® Catheter.

The Ellipsys® Vascular Access System is indicated for the creation of a proximal radial artery to perforating vein anastomosis via a retrograde venous access approach in patients with a minimum vessel diameter of 2.0mm and less than 1.5mm of separation between the artery and vein at the fistula creation site who have chronic kidney disease requiring dialysis. The main components of the Ellipsys Vascular Access System are the Ellipsys Catheter, the Ellipsys Crossing Needle, and the Ellipsys Power Controller. The Crossing Needle and Catheter are single-use, sterile disposables. The Ellipsys Power Controller is a reusable, non-sterile portable electronic console that is packaged and provided separately.

The Ellipsys Vascular Access System is indicated for the creation of a proximal radial artery to perforating vein anastomosis via a retrograde venous access approach in patients with a minimum vessel diameter of 2.0mm and less than 1.5mm of separation between the artery and vein at the fistula creation site who have chronic kidney disease requiring dialysis.The main components of the Ellipsys Vascular Access System are the Ellipsys Catheter, the Ellipsys Crossing Needle, and the Ellipsys Power Controller. The Crossing Needle and Catheter are single-use, sterile disposables that are packaged together, and referred to as the Ellipsys Vascular Access Kit. The Ellipsys Power Controller is a reusable, non-sterile portable electronic console that is packaged and provided separately.

Ambulatory ECG/EEG recorder - single channel

Ambulatory ECG/EEG recorder - two channel

Ambulatory Electromyogram (EMG) - two channel

Ambulatory ECG/EEG recorder - four channel

Ambulatory ECG recorder with accelerometer - single channel

Clinical E-Scope

E-Scope Hearing Impaired

Infusion catheter with balloon occlusion

Piercing Stylet

Steerable Transseptal Needle

Tissue oxygenation imaging device

Oxi-W system is intended for use: To spot check or monitor Oxygen saturation of arterial hemoglobin (SpO2%) and pulse rate. To analyze the pulse waveform (Photoplethysmography or PTG) provided by the oximeter. It only provides mathematical analysis of the input of the PTG using the first and second derivatives of the PTG values related to the microvascular condition.To analyze the basic rhythms of the NN or RR intervals in heart rate from the PTG, both in the time domain and in the frequency domain (short time 5 minutes). It only provides mathematical analysis of the heart rate variability values related to the autonomic nervous system function.

The TBL-ABI is indicated for use on adult subjects at risk of having or developing peripheral arterial disease (PAD). TBL-ABI is intended for the rapid measurement of ankle-brachial pressure index (ABPI), or ankle-brachial index (ABI), and pulse volume recording (PVR) / volume plethysmography in adults. It is suitable for use in wound care assessment, for assessing symptomatic PAD, and as a screening device for PAD. It may also be used on patients with venous or arterial ulcers prior to the application of compression therapy. TBL-ABI can be used on patients with unilateral lower limb amputation.

To spot check or monitor Oxygen saturation of arterial hemoglobin (SpO2%) and pulse rate. To analyze the pulse waveform (Photoelectrical Plethysmography or PP) provided by the oximeter. It only provides mathematical analyses of the input of the SpO2 measurement. To analyze the basic rhythms of the NN or RR intervals in heart rate, both in the time domain and in the frequency domain (short time 5 minutes). It only provides mathematical analysis of the input of the heart rate variability. The mathematical analysis of Photoelectrical Plethysmography and HRV ARE NOT intended use for diagnosis. The software provides a visual alarm for the values of the heart rate and/or SpO2 percent out of the normal range and for the bad quality signal transmission. The data are stored in PC in the Backup system of the LD-Oxi software. The device is intended use only for adult subjects (> 20 years old) This Oximeter is intended to be used in spot-checking (5 minutes). The device is intended use in licensed practitioner’s office This device is no intended to be used at home, in hospital or out-of-hospital transport The device is not intended use in support life and not for continuously monitoring The system will be use by practitioner.

Wearable Biosensor - ECG Remote Monitoring Biosensor

Wearable Biosensor - ECG Remote Monitoring Biosensor

Biosensor Patch - Electrocardiography Telemetric Monitoring Patch

Biosensor Patch - Electrocardiography Telemetric Monitoring Patch

Wearable Biosensor - ECG Remote Monitoring Biosensor Patch

Biosensor Patch - Electrocardiography Telemetric Monitoring Patch

Biosensor Patch - Electrocardiography Telemetric Monitoring Patch

HOLTER CONNECT business logic is a software running on cloud platform that provides interface for technician to generate Holter report on ECG data of patient, provides interface for physician to access and e-sign the Holter Report generated by the ECG technician.

HOLTER CONNECT Relay Application is a software that is installed on a compatible commercially available platform (mobile or tablet) that manages secured wireless communication between the Biosensor and the HOLTER CONNECT Secure Server for transferring acquired ECG data by the Biosensor.

Biosensor Patch - Electrocardiography Telemetric Monitoring Patch

Wearable Biosensor - ECG Remote Monitoring Biosensor Patch

Wearable Biosensor - ECG Remote Monitoring Biosensor

Wearable Biosensor - ECG Remote Monitoring Biosensor Patch

Wearable Biosensor - ECG Remote Monitoring Biosensor Patch

Wearable Biosensor - ECG Remote Monitoring Biosensor Patch

1.9/2.0 Fr, 27ga, Sharps Safety Needle & Tearaway Sheath Introducer

18ga x 7cm Sharps Safety Needle

19ga x 7cm Sharps Safety Needle

21ga x 7cm Sharps Safety Needle

Delta 3000 is a full function defibrillator analyzer including Transcutaneous Pacemakers. In addition to the capability of testing all bi-polar defibrillators, it tests all Transcutaneous pacers, Atrial and Ventricular pacemakers. Delta 3000 is compact, light weight and easy to use. Among the functions include energy, peak voltage as well as cardio version, 10 lead ECG Arrhythmia waveform.Test results can be easily uploaded to a PC through the serial port.

The DELTA 3300 Defibrillator / Transcutaneous Pacemaker Analyzer is a precision instrument for testing defibrillators and external (Transcutaneous) Pacemakers. It combines the complete testing functions of a Defibrillator Tester, Transcutaneous Pacemaker Analyzer, and 12-Lead ECG / Arrhythmia Simulator into one compact, lightweight, and easy-to-use instrument.The Delta 3300 tests all Defibrillators including AEDs. It measures both monophasic and Bi-Phasic waveforms. It is compact, lightweight and easy to use. The test results can be saved in the internal memory and uploaded to the PC and printed using ProComPrint software (CD included with the unit).

The EXPMT 2000 will test and verify all the functions of any External Pacemaker including, transcutaneous and Atrial and Ventricular sequential pacemakers.Operation of the analyzer is menu driven via eight tactile keys and a large four line LCD display. Test measurements are simultaneously presented on the display. Five ECG snaps are standard along with an RS-232 serial port that allows for printing both a heading and test measurements on a separate printer. Information may also be sent to an external device. The external test load has twelve user-selectable loads from 100 to 1000 Ohms for use with transcutaneous pacemakers.

Stainless Steel Cardiac Finger Heart Retractor - Large

Stainless Steel Cardiac 3 Finger Heart Retractor - Large

Stainless Steel Cardiac Finger Heart Retractor - Small

Stainless Steel Cardiac 3 Finger Heart Retractor - Small

Retrieval Pouch-Rip Stop-W/Pull Strap - 5" x 7"

Retrieval Pouch-Rip Stop-W/Pull Strap - 7" x 10"

Premier Heart MCG 12 Lead capture hardware.