Amico Mobility Solutions Corporation CB-GO-LIFT-4PT-1000 GoLift

ImPACT is intended for use as a computer-based neurocognitive test battery to aid in the assessment and management of concussion. ImPACT is a neurocognitive test battery that provides healthcare professionals with objective measure of neurocognitive functioning as an assessment aid and in the management of concussion in individuals ages 12-80.

Airsonett is based on the Temperature controlled Laminar Airflow (TLA) technology. The air from the room enters the Airsonett and passes a filter that captures allergens and other particles. The filtered air is cooled to slightly below the ambient room temperature and is supplied with a low velocity from the air supply nozzle. Since the filtered air is slightly cooler, and therefore heavier than the surrounding air, the filtered air will descend slowly from the air supply nozzle by means of gravity in a laminar manner (non-turbulent). This descending colder air counteracts the body convection, displaces the allergen load in the breathing zone and thus dramatically reduces the level of inhalant allergens for the patient all through the night.

Calibration phantom intended for use as an accessory to the QCT Pro Bone Mineral Densitometry Software.

FORCEPS CANINES #4

K-WIRE TROCAR POINT BOTH ENDS .062 X 4

K-WIRE Trocar POINT BOTH ENDS .035 x 4

Neurofeedback Software

CATALYST 4 MANUAL WHEELCHAIR

CER-S is stand-alone software medical device, providing advanced solutions for importing, analyzing, editing, reviewing and generating clinical reports related to digital continuous ECG recordings (Holters). CER-S does not carry out an automated interpretation of the ECG data.

ImPACT is intended for use as a computer-based neurocognitive test battery to aid in the assessment and management of concussion. ImPACT is a neurocognitive test battery that provides healthcare professionals with objective measure of neurocognitive functioning as an assessment aid and in the management of concussion in individuals ages 12-80.

Airsonett is based on the Temperature controlled Laminar Airflow (TLA) technology. The air from the room enters the Airsonett and passes a filter that captures allergens and other particles. The filtered air is cooled to slightly below the ambient room temperature and is supplied with a low velocity from the air supply nozzle. Since the filtered air is slightly cooler, and therefore heavier than the surrounding air, the filtered air will descend slowly from the air supply nozzle by means of gravity in a laminar manner (non-turbulent). This descending colder air counteracts the body convection, displaces the allergen load in the breathing zone and thus dramatically reduces the level of inhalant allergens for the patient all through the night.

Calibration phantom intended for use as an accessory to the QCT Pro Bone Mineral Densitometry Software.

FORCEPS CANINES #4