INSTRUMENTATION INDUSTRIES, INCORPORATED BE 148-5-3.5 BE 148-5-3.5 Gauge Clamp

The BE 148-4 Cuff Pressure Monitor Adapter attaches to NS Series gauges with a 1/4" NPT fitting to create a Cuff Pressure Monitor. During ventilation, the NS Series Cuff Pressure Monitors are devices used to periodically monitor endotracheal or tracheostomy tube balloon pressure to assure an adequate seal between the tube and the tracheal wall.These devices are intended to be used by or on the order of a physician.

Ventilator Tubing Accessory - Swivel Tubing Clamp. Swivels 360 degrees; fits tubing and rails 1/2" to 1" inch diameter.

The BE 139 Pressure Adapter: Dimensions - Barbed port fits 3/16" I.D. tubing x 15mm I.D./22mm O.D. x 15mm O/D.

Pilot tube repair kit is used to repair a leaking pilot line of endotracheal and tracheostomy tubes with inside diameters of 0.032 inch (21 gauge) to 0.050 inch (18 gauge). Use of a pilot tube repair kit can delay the replacement of the endotracheal or tracheostomy tube thus reducing trauma to the patient.

External - Screwdriver

What's Included: Pads Reconditioned battery C02 SPO2Always Code-Ready Remote viewing and administration from PC or mobile device History of readiness logs for the Joint Commission Readiness check includes defib, pacing, and ECG modules; AC power; battery; 30-joule shock test; electrodes attached and not expired Customizable dashboard

The BE 148-5-1 Gauge Clamp is an accessory to the NS Series Vacuum/Pressure Gauges. The BE 148-5-1 securely mounts Gauges with a rear 1/4" NPT thread to 3/4" diameter poles.

The BE 148-5-2 Gauge Clamp is an accessory to the NS Series Vacuum/Pressure Gauges. The BE 148-5-2 securely mounts Gauges with a rear 1/4" NPT thread to poles with 3/4" to 1-1/2" diameter.

The BE 148-5-2.5 Gauge Clamp is an accessory to the NS Series Vacuum/Pressure Gauges. The BE 148-5-2.5 is used to securely mount Gauges with a rear 1/4" NPT thread to medical equipment such as poles, incubators, ventilators, etc. The BE 148-5-2.5 clamp works with equipment that requires a clamp having a 1" to 2-1/2" opening.

The BE 148-4 Cuff Pressure Monitor Adapter attaches to NS Series gauges with a 1/4" NPT fitting to create a Cuff Pressure Monitor. During ventilation, the NS Series Cuff Pressure Monitors are devices used to periodically monitor endotracheal or tracheostomy tube balloon pressure to assure an adequate seal between the tube and the tracheal wall.These devices are intended to be used by or on the order of a physician.

Ventilator Tubing Accessory - Swivel Tubing Clamp. Swivels 360 degrees; fits tubing and rails 1/2" to 1" inch diameter.

The BE 139 Pressure Adapter: Dimensions - Barbed port fits 3/16" I.D. tubing x 15mm I.D./22mm O.D. x 15mm O/D.

Pilot tube repair kit is used to repair a leaking pilot line of endotracheal and tracheostomy tubes with inside diameters of 0.032 inch (21 gauge) to 0.050 inch (18 gauge). Use of a pilot tube repair kit can delay the replacement of the endotracheal or tracheostomy tube thus reducing trauma to the patient.