MEDTRONIC, INC. 304-20POR

The gbACT+ Kit is an in vitro diagnostic reagent for use with the Sonoclot® Coagulation & Platelet Function Analyzer System. The gbACT+ test is a glass bead activated whole blood clotting time test. It may also be used with citrated whole blood and plasma. Warning: The gbACT+ test is not intended for high dose heparin management during cardiopulmonary bypass surgery.The gbACT+ Kit is intended for general purpose global hemostasis monitoring including: clot detection, fibrin formation, platelet function, and hyperfibrinolysis. The monitoring information is typically used for anticoagulant management at low to moderate heparin levels (0 to 2 units per ml), hypercoagulable and/or hypocoagulable screening, platelet function assessment, and hyperfibrinolysis screening.When used with the Sonoclot Analyzer System, the gbACT+ test provides quantitative Onset/ACT and Clot Rate results as well as qualitative and quantitative information on the Sonoclot Signature including: fibrin formation, platelet function, and hyperfibrinolysis.Each kit contains 100 lidded pink plastic activation cuvettes, 100 probes, and instructions for use. The activation cuvettes contain a controlled amount of glass beads and a magnetic stir bar.

The aiACT Kit is an in vitro diagnostic test for use with the Sonoclot® Coagulation & Platelet Function Analyzer System. The aiACT test is an activated whole blood clotting time test which uses a blend of celite and clay for contact activation. It may also be used with citrated whole blood.The aiACT Kit is only intended for high dose (ACT greater or equal to 400 seconds, on Sonoclot Analyzer) heparin anticoagulation management as typically encountered during cardiopulmonary bypass surgery. The aiACT test provides ACT results that are substantially unaffected by aprotinin. When used with the Sonoclot Analyzer System, the aiACT test provides quantitative Onset/ACT and Clot Rate results. Do not use the aiACT test for platelet function assessment. Each kit contains 100 lidded yellow plastic activation cuvettes, 100 probes, and instructions for use. The activation cuvettes contain a controlled amount of contact activator and a magnetic stir bar.

The aiACT Kit is an in vitro diagnostic test for use with the Sonoclot® Coagulation & Platelet Function Analyzer System. The aiACT test is an activated whole blood clotting time test which uses a blend of celite and clay for contact activation. It may also be used with citrated whole blood.The aiACT Kit is only intended for high dose (ACT greater or equal to 400 seconds, on Sonoclot Analyzer) heparin anticoagulation management as typically encountered during cardiopulmonary bypass surgery. The aiACT test provides ACT results that are substantially unaffected by aprotinin. When used with the Sonoclot Analyzer System, the aiACT test provides quantitative Onset/ACT and Clot Rate results. Do not use the aiACT test for platelet function assessment. Each kit contains 24 lidded yellow plastic activation cuvettes, 24 probes, and instructions for use. The activation cuvettes contain a controlled amount of contact activator and a magnetic stir bar.

4F Micro Introducer Kit, Nitinol Guidewire

CRTG 304-20POR PORC HDR 5L INT 9BX

Dedicated Hand X-Ray system

IBEX Slit Lamps are specialized LED illuminated biomicroscope that provide a stereoscopic magnified view of the eye structures in crystal clear detail, enabling anatomical diagnoses to be made for a variety of eye conditions.

Resin Artificial Teeth

Resin Artificial Teeth

The gbACT+ Kit is an in vitro diagnostic reagent for use with the Sonoclot® Coagulation & Platelet Function Analyzer System. The gbACT+ test is a glass bead activated whole blood clotting time test. It may also be used with citrated whole blood and plasma. Warning: The gbACT+ test is not intended for high dose heparin management during cardiopulmonary bypass surgery.The gbACT+ Kit is intended for general purpose global hemostasis monitoring including: clot detection, fibrin formation, platelet function, and hyperfibrinolysis. The monitoring information is typically used for anticoagulant management at low to moderate heparin levels (0 to 2 units per ml), hypercoagulable and/or hypocoagulable screening, platelet function assessment, and hyperfibrinolysis screening.When used with the Sonoclot Analyzer System, the gbACT+ test provides quantitative Onset/ACT and Clot Rate results as well as qualitative and quantitative information on the Sonoclot Signature including: fibrin formation, platelet function, and hyperfibrinolysis.Each kit contains 24 lidded pink plastic activation cuvettes, 24 probes, and instructions for use. The activation cuvettes contain a controlled amount of glass beads and a magnetic stir bar.

The gbACT+ Kit is an in vitro diagnostic reagent for use with the Sonoclot® Coagulation & Platelet Function Analyzer System. The gbACT+ test is a glass bead activated whole blood clotting time test. It may also be used with citrated whole blood and plasma. Warning: The gbACT+ test is not intended for high dose heparin management during cardiopulmonary bypass surgery.The gbACT+ Kit is intended for general purpose global hemostasis monitoring including: clot detection, fibrin formation, platelet function, and hyperfibrinolysis. The monitoring information is typically used for anticoagulant management at low to moderate heparin levels (0 to 2 units per ml), hypercoagulable and/or hypocoagulable screening, platelet function assessment, and hyperfibrinolysis screening.When used with the Sonoclot Analyzer System, the gbACT+ test provides quantitative Onset/ACT and Clot Rate results as well as qualitative and quantitative information on the Sonoclot Signature including: fibrin formation, platelet function, and hyperfibrinolysis.Each kit contains 100 lidded pink plastic activation cuvettes, 100 probes, and instructions for use. The activation cuvettes contain a controlled amount of glass beads and a magnetic stir bar.

The aiACT Kit is an in vitro diagnostic test for use with the Sonoclot® Coagulation & Platelet Function Analyzer System. The aiACT test is an activated whole blood clotting time test which uses a blend of celite and clay for contact activation. It may also be used with citrated whole blood.The aiACT Kit is only intended for high dose (ACT greater or equal to 400 seconds, on Sonoclot Analyzer) heparin anticoagulation management as typically encountered during cardiopulmonary bypass surgery. The aiACT test provides ACT results that are substantially unaffected by aprotinin. When used with the Sonoclot Analyzer System, the aiACT test provides quantitative Onset/ACT and Clot Rate results. Do not use the aiACT test for platelet function assessment. Each kit contains 100 lidded yellow plastic activation cuvettes, 100 probes, and instructions for use. The activation cuvettes contain a controlled amount of contact activator and a magnetic stir bar.

The aiACT Kit is an in vitro diagnostic test for use with the Sonoclot® Coagulation & Platelet Function Analyzer System. The aiACT test is an activated whole blood clotting time test which uses a blend of celite and clay for contact activation. It may also be used with citrated whole blood.The aiACT Kit is only intended for high dose (ACT greater or equal to 400 seconds, on Sonoclot Analyzer) heparin anticoagulation management as typically encountered during cardiopulmonary bypass surgery. The aiACT test provides ACT results that are substantially unaffected by aprotinin. When used with the Sonoclot Analyzer System, the aiACT test provides quantitative Onset/ACT and Clot Rate results. Do not use the aiACT test for platelet function assessment. Each kit contains 24 lidded yellow plastic activation cuvettes, 24 probes, and instructions for use. The activation cuvettes contain a controlled amount of contact activator and a magnetic stir bar.

4F Micro Introducer Kit, Nitinol Guidewire