MEDTRONIC SOFAMOR DANEK, INC. CX01A KYPHON® Xpede™ Bone Cement

Simplex® HV with Gentamicin is a fast-setting acrylic resin with addition of gentamicin sulfate for use in bone surgery. Mixing the two separate sterile components produces a ductile bone cement which, after hardening, fixes the implant and transfers stresses produced during movement evenly to the bone. Simplex® HV with Gentamicinn cement powder also contains insoluble zirconium dioxide as an X-ray contrast medium. Simplex® HV with Gentamicin does not emit a signal and does not pose a safety risk in a magnetic resonance environment.

The SpineKure Kyphoplasty System is designed to reduce spinal compression fracture and restore sagittal alignment by creating a space in the vertebral body to facilitate the insertion of bone cement. The SpineKure Kyphoplasty System is comprised of a Balloon Catheter, Balloon Inflator and Cement Delivery System (Accessories kit). The Balloon Catheter’s main components are the shaft, hub and the inflatable balloon located at the distal tip. The surface of balloon is covered with a silicone lubricant to enhance the insertion and withdrawal of catheter. Radiopaque markers located at the distal and proximal end of deflated working surface allow fluoroscopic visualization of the deflated balloon catheter during positioning. The Balloon Inflator (SBI) is a disposable device with an integral pressure gauge. The Cement Delivery System (SCDS) are consist of Bone Access Needle (SBN), Cement Filler & Pusher (SFP), Cannula & Expander (SCE), Drill Bit (SDB), Wire-pin (SWP-T, SWP-R).

The SpineKure Kyphoplasty System is designed to reduce spinal compression fracture and restore sagittal alignment by creating a space in the vertebral body to facilitate the insertion of bone cement. The SpineKure Kyphoplasty System is comprised of a Balloon Catheter, Balloon Inflator and Cement Delivery System (Accessories kit). The Balloon Catheter’s main components are the shaft, hub and the inflatable balloon located at the distal tip. The surface of balloon is covered with a silicone lubricant to enhance the insertion and withdrawal of catheter. Radiopaque markers located at the distal and proximal end of deflated working surface allow fluoroscopic visualization of the deflated balloon catheter during positioning. The Balloon Inflator (SBI) is a disposable device with an integral pressure gauge. The Cement Delivery System (SCDS) are consist of Bone Access Needle (SBN), Cement Filler & Pusher (SFP), Cannula & Expander (SCE), Drill Bit (SDB), Wire-pin (SWP-T, SWP-R).

Mendec Spine HV is a highly viscous, radio-opaque acrylic resin (PMMA based) for vertebral augmentation procedures available as a closed mixing unit (the powder and liquid components are enclosed in a syringe-like device).

BONE CEMENT CX01B XPEDE W MIXER US

BONE CEMENT C01B HV-R WITH MIXER US

RhodoLED® XL is a red light emitting LED lamp which is used exclusively in combination with Ameluz® (aminolevulinic acid hydrochloride) gel, 10% for lesion-directed and field-directed treatment of actinic keratoses (AKs) of mild-to-moderate severity on the face and scalp.

BF-RhodoLED® is a red light emitting LED lamp which is used exclusively in combination with Ameluz® (aminolevulinic acid hydrochloride) gel, 10% for lesion-directed and field-directed treatment of actinic keratoses (AKs) of mild-to-moderate severity on the face and scalp.

Concentriq AP-Dx is a web-based, software-only device that is intended to aid pathology professionals in viewing, interpretation and management of digital whole slide images (WSI) of scanned surgical pathology slides prepared from formalin-fixed, paraffin-embedded (FFPE) tissue obtained from Hamamatsu NanoZoomer S360MD Slide scanner. It aids the pathologist in the review, interpretation, and management of pathology slide digital images used to generate a primary diagnosis.

SmartSet GHV Gentamicin High Viscosity Bone Cement 40g

Simplex® HV with Gentamicin is a fast-setting acrylic resin with addition of gentamicin sulfate for use in bone surgery. Mixing the two separate sterile components produces a ductile bone cement which, after hardening, fixes the implant and transfers stresses produced during movement evenly to the bone. Simplex® HV with Gentamicinn cement powder also contains insoluble zirconium dioxide as an X-ray contrast medium. Simplex® HV with Gentamicin does not emit a signal and does not pose a safety risk in a magnetic resonance environment.

The SpineKure Kyphoplasty System is designed to reduce spinal compression fracture and restore sagittal alignment by creating a space in the vertebral body to facilitate the insertion of bone cement. The SpineKure Kyphoplasty System is comprised of a Balloon Catheter, Balloon Inflator and Cement Delivery System (Accessories kit). The Balloon Catheter’s main components are the shaft, hub and the inflatable balloon located at the distal tip. The surface of balloon is covered with a silicone lubricant to enhance the insertion and withdrawal of catheter. Radiopaque markers located at the distal and proximal end of deflated working surface allow fluoroscopic visualization of the deflated balloon catheter during positioning. The Balloon Inflator (SBI) is a disposable device with an integral pressure gauge. The Cement Delivery System (SCDS) are consist of Bone Access Needle (SBN), Cement Filler & Pusher (SFP), Cannula & Expander (SCE), Drill Bit (SDB), Wire-pin (SWP-T, SWP-R).

The SpineKure Kyphoplasty System is designed to reduce spinal compression fracture and restore sagittal alignment by creating a space in the vertebral body to facilitate the insertion of bone cement. The SpineKure Kyphoplasty System is comprised of a Balloon Catheter, Balloon Inflator and Cement Delivery System (Accessories kit). The Balloon Catheter’s main components are the shaft, hub and the inflatable balloon located at the distal tip. The surface of balloon is covered with a silicone lubricant to enhance the insertion and withdrawal of catheter. Radiopaque markers located at the distal and proximal end of deflated working surface allow fluoroscopic visualization of the deflated balloon catheter during positioning. The Balloon Inflator (SBI) is a disposable device with an integral pressure gauge. The Cement Delivery System (SCDS) are consist of Bone Access Needle (SBN), Cement Filler & Pusher (SFP), Cannula & Expander (SCE), Drill Bit (SDB), Wire-pin (SWP-T, SWP-R).

Mendec Spine HV is a highly viscous, radio-opaque acrylic resin (PMMA based) for vertebral augmentation procedures available as a closed mixing unit (the powder and liquid components are enclosed in a syringe-like device).