Perimeter Medical Imaging AI, Inc. ASY-2000 THiA

ChairsideCAD is a software device intended to support the design of dental restorations such as inlays, onlays, crowns, copings,veneers, bridges, pontics, provisionals, and bite splints via a 3D CAD tool. The design is basedon suitable 3D scans of the patient’s dental anatomy produced by a compatible scanner. The software generates geometricaloutput of the design for manufacturing on compatible CAM systems.ChairsideCAD is intended to be used by trained professionals in dental practices and is not to be used for any purpose otherthan the design of dental restorations or bite splints, nor is it to be used for designing dental abutments.

LiverMultiScan is a standalone software device. The purpose of the LiverMultiScan device is to assist the trained operator with the evaluation of information from Magnetic Resonance (MR) images from a single time-point (patient visit). A trained operator places circular regions of interest drawn upon previously acquired MR images, from which a summary report is generated. The summary report is sent to an interpreting clinician. LiverMultiScan does not replace the usual procedures for assessment of the liver by an interpreting clinician, providing many opportunities for competent human intervention in the interpretation of images and information displayed. The metrics are intended to be used as an additional diagnostic input to provide information to clinicians as part of a wider diagnostic process. It is expected that in the normal course of liver disease diagnosis, patients will present with clinical symptoms or risk factors which may indicate liver disease.Liver function tests, blood tests, ultrasound scanning as well as liver biopsy are all expected to be used at the discretion of a qualified clinician in addition to information obtained from the use of LiverMultiScan metrics. The purpose of LiverMultiScan metrics are to provide imaging information to assist in characterising tissue in the liver, which is additional to existing methods for obtaining information relating to the liver. LiverMultiScan metrics do not replace any existing diagnostic source of information, but can be used to identify patients who may benefit most from further evaluation, including biopsy. Information gathered through existing diagnostic tests and clinical evaluation of the patient, as well as information obtained from LiverMultiScan metrics, may contribute to a diagnostic decision.

Medis Suite MRCT is software intended to be used for the visualization and analysis of MR and CT images of the heart and blood vessels. This includes:- double oblique review of MR Angiographic images,- 3D review by means of MIP and volume rendering,- 3D reformatting of MR Angiographic images, and- performing caliper measurements. Medis Suite MRCT is intended to support the following visualization functionalities:- cine loop and 2D review- performing caliper measurements Medis Suite MRCT is also intended to support the following analyses:- cardiac function quantification- anatomy and tissue segmentation - signal intensity analysis for the myocardium and infarct sizing- MR parametric maps (such as T1, T2, T2* relaxation)- MR velocity-encoded flow quantificationMedis Suite MRCT is also intended to be used for:- quantification of T2* results in MR images that can be used to characterize iron loading in the heart and the liver - MR velocity-encoded flow quantification of cerebral spinal fluidThese analyses are based on contours that are either manually drawn by the clinician or trained medical technician who is operating the software, or automatically detected by the software and subsequently presented for review and manual editing. The results obtained are displayed on top of the images and provided in reports.The analysis results obtained with Medis Suite MRCT are intended for use by cardiologists and radiologists:- to support clinical decisions concerning the heart and vessels, and- to support the evaluation of interventions or drug therapy applied for conditions of the heart and vessels.

DentalDB is a software application intended for the management of data regarding patients, cases, dental practices, dentallaboratories, and manufacturing facilities. The optional dentalshare service allows for the transfer of pertinent data to andfrom remote facilities.DentalDB is intended for use by trained professionals, such as dental technicians and dentists.

SUTURE ANCHOR, PEEK SUTURETAK 3 X 12.2MM

DBL LOADED 5.5MM PEEK SWVLK

SUTR ANCH,BIO-COMP S-TAK

Set Includes the following: 242-100-008 : 2.5 mm Grasper 242-100-004 : 2.1 mm Left Blunt Nose Grasper 242-100-005 : 2.1 mm Down Blunt Nose Grasper 242-100-006 : 2.1 mm Up Blunt Nose Grasper 242-100-002 :2.1 mm Straight Blunt Nose Grasper 242-100-012 : 2.7 mm Straight Blunt Nose 242-100-007 : 2.5 mm Championª Scissors 242-100-013 : 2.7 mm Up Blunt Nose

ChairsideCAD is a software device intended to support the design of dental restorations such as inlays, onlays, crowns, copings,veneers, bridges, pontics, provisionals, and bite splints via a 3D CAD tool. The design is basedon suitable 3D scans of the patient’s dental anatomy produced by a compatible scanner. The software generates geometricaloutput of the design for manufacturing on compatible CAM systems.ChairsideCAD is intended to be used by trained professionals in dental practices and is not to be used for any purpose otherthan the design of dental restorations or bite splints, nor is it to be used for designing dental abutments.

LiverMultiScan is a standalone software device. The purpose of the LiverMultiScan device is to assist the trained operator with the evaluation of information from Magnetic Resonance (MR) images from a single time-point (patient visit). A trained operator places circular regions of interest drawn upon previously acquired MR images, from which a summary report is generated. The summary report is sent to an interpreting clinician. LiverMultiScan does not replace the usual procedures for assessment of the liver by an interpreting clinician, providing many opportunities for competent human intervention in the interpretation of images and information displayed. The metrics are intended to be used as an additional diagnostic input to provide information to clinicians as part of a wider diagnostic process. It is expected that in the normal course of liver disease diagnosis, patients will present with clinical symptoms or risk factors which may indicate liver disease.Liver function tests, blood tests, ultrasound scanning as well as liver biopsy are all expected to be used at the discretion of a qualified clinician in addition to information obtained from the use of LiverMultiScan metrics. The purpose of LiverMultiScan metrics are to provide imaging information to assist in characterising tissue in the liver, which is additional to existing methods for obtaining information relating to the liver. LiverMultiScan metrics do not replace any existing diagnostic source of information, but can be used to identify patients who may benefit most from further evaluation, including biopsy. Information gathered through existing diagnostic tests and clinical evaluation of the patient, as well as information obtained from LiverMultiScan metrics, may contribute to a diagnostic decision.

Medis Suite MRCT is software intended to be used for the visualization and analysis of MR and CT images of the heart and blood vessels. This includes:- double oblique review of MR Angiographic images,- 3D review by means of MIP and volume rendering,- 3D reformatting of MR Angiographic images, and- performing caliper measurements. Medis Suite MRCT is intended to support the following visualization functionalities:- cine loop and 2D review- performing caliper measurements Medis Suite MRCT is also intended to support the following analyses:- cardiac function quantification- anatomy and tissue segmentation - signal intensity analysis for the myocardium and infarct sizing- MR parametric maps (such as T1, T2, T2* relaxation)- MR velocity-encoded flow quantificationMedis Suite MRCT is also intended to be used for:- quantification of T2* results in MR images that can be used to characterize iron loading in the heart and the liver - MR velocity-encoded flow quantification of cerebral spinal fluidThese analyses are based on contours that are either manually drawn by the clinician or trained medical technician who is operating the software, or automatically detected by the software and subsequently presented for review and manual editing. The results obtained are displayed on top of the images and provided in reports.The analysis results obtained with Medis Suite MRCT are intended for use by cardiologists and radiologists:- to support clinical decisions concerning the heart and vessels, and- to support the evaluation of interventions or drug therapy applied for conditions of the heart and vessels.

DentalDB is a software application intended for the management of data regarding patients, cases, dental practices, dentallaboratories, and manufacturing facilities. The optional dentalshare service allows for the transfer of pertinent data to andfrom remote facilities.DentalDB is intended for use by trained professionals, such as dental technicians and dentists.