STRYKER CORPORATION 0504-883-115 null

The Profile-ESP Radiographic Marker is an accessory for use within the Profile-ESP workflow of the VMA System. It can facilitate the conversion of measurement data by the Profile-ESP software to mm units, and facilitates stitching of spinal x-rays as part of the Image Processing service. The marker is placed around the neck of the patient by the medical imaging professional during x-ray imaging. It is shipped by Company personnel to the customer site and includes a user manual in the device package. No additional training or installation is required.Length – approximately 36” / Weight – approximately 5 oz.

ImagenSPECT™ 3.0 is a Windows application which allows physicians and healthcare professionals to inspect, reconstruct and reorient myocardial perfusion SPECT images. The system processes gated and ungated SPECT cardiac images to create 3D tomographic data. The user can correct for patient motion, change filter settings, change reconstruction settings, range of reconstruction, and reorientation angles. The application also models the influence of distance dependent blur. The use of this system is limited to qualified, licensed healthcare providers (radiologists, nuclear cardiologists or nuclear medicine physicians) trained in the use of nuclear medicine imaging devices. This software also processes, display and performs quantitative calculations of LVEF on multigated acquisition blood pool scans (MUGA). ImagenSPECT™ 3.0 is used to quantitate the uptake of 99mTc pyrophosphate in early and late planar and SPECT studies.The ImagenSPECT™ 3.0 system is designed to take nuclear medicine data from commercially available SPECT systems and process the data into a format that can be visualized by a separate computer program or workstation. In addition, quarter-counts, half dose and/or half-time scans can be reconstructed with ImagenSPECT™ 3.0 using resolution recovery, iterative reconstruction and is equivalent to the predicate ImagenSPECT™ (k152503) using half-counts and full counts (full-time scan, half dose/ half-time, full dose).

The EVA (Enhanced Visual Assessment) System is intended to provide magnified viewing of the vagina, cervix and external genitalia in order to aid in diagnosing abnormalities and selecting areas for biopsy. The EVA System is a mobile colposcope in which a smartphone is fitted and consists of a colposcope body, lens, smartphone upper and lower brackets, LED electronics, a mobile app for image capture, and online portal for image transfer and remoteviewing. The device is intended for use in hospitals, doctor's offices and remote and rural clinics.

ORTHO CONNECT™ Software is designed to collect data from the Ortho Clinical Diagnostics blood typing instruments and its proprietary immunohematology reagent system, which allows operators to track individual patient and donor samples and link them to the appropriate test results. The software collates the results from testing, assigns outcomes to individual samples according to configured rules, and formats output files that can be sent to a Laboratory Information Management System (LIMS).ORTHO CONNECT™ Software is intended to be used by Blood Establishments and by personnel who are trained in its operation.

Nitinol Stone Retrieval Basket 1.5Fr, 120cm, Tipless

Dental ultrasonic surgical system handpiece tip

Dental ultrasonic surgical system handpiece tip

Dental ultrasonic surgical system handpiece tip

Dream Sock Software App. The Dream Sock is intended for over-the-counter (OTC) use only in a home environment. It is not intended to provide notification for every episode of the unexpected occurrences of elevated or depressed PR or a low SpO2 level; rather, the Dream Sock is intended to provide a notification only when sufficient data are available for analysis. The notifications and associated data can be used to supplement the decision by caregivers to seek additional guidance for medical care of the infant. The Dream Sock is not intended to replace traditional methods of monitoring, diagnosis or treatment.

Olea Sphere V3.0 is an image processing software package to be used by trained professionals including but not limited to physicians and medical technicians. The software runs on a standard "off-the-shelf" workstation and can be used to perform image viewing, processing, image collage and analysis of medical images. Data and images are acquired through DICOM compliant imaging devices and modalities.

The Profile-ESP Radiographic Marker is an accessory for use within the Profile-ESP workflow of the VMA System. It can facilitate the conversion of measurement data by the Profile-ESP software to mm units, and facilitates stitching of spinal x-rays as part of the Image Processing service. The marker is placed around the neck of the patient by the medical imaging professional during x-ray imaging. It is shipped by Company personnel to the customer site and includes a user manual in the device package. No additional training or installation is required.Length – approximately 36” / Weight – approximately 5 oz.

ImagenSPECT™ 3.0 is a Windows application which allows physicians and healthcare professionals to inspect, reconstruct and reorient myocardial perfusion SPECT images. The system processes gated and ungated SPECT cardiac images to create 3D tomographic data. The user can correct for patient motion, change filter settings, change reconstruction settings, range of reconstruction, and reorientation angles. The application also models the influence of distance dependent blur. The use of this system is limited to qualified, licensed healthcare providers (radiologists, nuclear cardiologists or nuclear medicine physicians) trained in the use of nuclear medicine imaging devices. This software also processes, display and performs quantitative calculations of LVEF on multigated acquisition blood pool scans (MUGA). ImagenSPECT™ 3.0 is used to quantitate the uptake of 99mTc pyrophosphate in early and late planar and SPECT studies.The ImagenSPECT™ 3.0 system is designed to take nuclear medicine data from commercially available SPECT systems and process the data into a format that can be visualized by a separate computer program or workstation. In addition, quarter-counts, half dose and/or half-time scans can be reconstructed with ImagenSPECT™ 3.0 using resolution recovery, iterative reconstruction and is equivalent to the predicate ImagenSPECT™ (k152503) using half-counts and full counts (full-time scan, half dose/ half-time, full dose).

The EVA (Enhanced Visual Assessment) System is intended to provide magnified viewing of the vagina, cervix and external genitalia in order to aid in diagnosing abnormalities and selecting areas for biopsy. The EVA System is a mobile colposcope in which a smartphone is fitted and consists of a colposcope body, lens, smartphone upper and lower brackets, LED electronics, a mobile app for image capture, and online portal for image transfer and remoteviewing. The device is intended for use in hospitals, doctor's offices and remote and rural clinics.

ORTHO CONNECT™ Software is designed to collect data from the Ortho Clinical Diagnostics blood typing instruments and its proprietary immunohematology reagent system, which allows operators to track individual patient and donor samples and link them to the appropriate test results. The software collates the results from testing, assigns outcomes to individual samples according to configured rules, and formats output files that can be sent to a Laboratory Information Management System (LIMS).ORTHO CONNECT™ Software is intended to be used by Blood Establishments and by personnel who are trained in its operation.