Surgical Specialties México, S. de R.L. de C.V. 62-3060G Sharpoint

The Profile-ESP Radiographic Marker is an accessory for use within the Profile-ESP workflow of the VMA System. It can facilitate the conversion of measurement data by the Profile-ESP software to mm units, and facilitates stitching of spinal x-rays as part of the Image Processing service. The marker is placed around the neck of the patient by the medical imaging professional during x-ray imaging. It is shipped by Company personnel to the customer site and includes a user manual in the device package. No additional training or installation is required.Length – approximately 36” / Weight – approximately 5 oz.

ImagenSPECT™ 3.0 is a Windows application which allows physicians and healthcare professionals to inspect, reconstruct and reorient myocardial perfusion SPECT images. The system processes gated and ungated SPECT cardiac images to create 3D tomographic data. The user can correct for patient motion, change filter settings, change reconstruction settings, range of reconstruction, and reorientation angles. The application also models the influence of distance dependent blur. The use of this system is limited to qualified, licensed healthcare providers (radiologists, nuclear cardiologists or nuclear medicine physicians) trained in the use of nuclear medicine imaging devices. This software also processes, display and performs quantitative calculations of LVEF on multigated acquisition blood pool scans (MUGA). ImagenSPECT™ 3.0 is used to quantitate the uptake of 99mTc pyrophosphate in early and late planar and SPECT studies.The ImagenSPECT™ 3.0 system is designed to take nuclear medicine data from commercially available SPECT systems and process the data into a format that can be visualized by a separate computer program or workstation. In addition, quarter-counts, half dose and/or half-time scans can be reconstructed with ImagenSPECT™ 3.0 using resolution recovery, iterative reconstruction and is equivalent to the predicate ImagenSPECT™ (k152503) using half-counts and full counts (full-time scan, half dose/ half-time, full dose).

Dream Sock Software App. The Dream Sock is intended for over-the-counter (OTC) use only in a home environment. It is not intended to provide notification for every episode of the unexpected occurrences of elevated or depressed PR or a low SpO2 level; rather, the Dream Sock is intended to provide a notification only when sufficient data are available for analysis. The notifications and associated data can be used to supplement the decision by caregivers to seek additional guidance for medical care of the infant. The Dream Sock is not intended to replace traditional methods of monitoring, diagnosis or treatment.

Tinted Pearlescent Powder

S2188 NovoTHOR Gen 3.0 Reg

S2190 NovoTHOR Gen 3.0 XL

S2189 NovoTHOR Gen 3.0 Reg PRX

S2186 NovoTHOR Gen 3.0 XL PRX

The AbutmentCAD module is intended as an aid to the restoration of chewing function in partially or fully edentulous mandiblesand maxillae. AbutmentCAD is a software device intended to be used by trained professionals in dental practices or dentallaboratories for the design of patient specific implant borne prosthetics such as one-piece abutments, two-piece/hybridabutments, single or multi-unit screw-retained restorations. The design result is intended to be used by the manufacturerof an endosseous dental implant abutment to create the final device.

The Profile-ESP Radiographic Marker is an accessory for use within the Profile-ESP workflow of the VMA System. It can facilitate the conversion of measurement data by the Profile-ESP software to mm units, and facilitates stitching of spinal x-rays as part of the Image Processing service. The marker is placed around the neck of the patient by the medical imaging professional during x-ray imaging. It is shipped by Company personnel to the customer site and includes a user manual in the device package. No additional training or installation is required.Length – approximately 36” / Weight – approximately 5 oz.

ImagenSPECT™ 3.0 is a Windows application which allows physicians and healthcare professionals to inspect, reconstruct and reorient myocardial perfusion SPECT images. The system processes gated and ungated SPECT cardiac images to create 3D tomographic data. The user can correct for patient motion, change filter settings, change reconstruction settings, range of reconstruction, and reorientation angles. The application also models the influence of distance dependent blur. The use of this system is limited to qualified, licensed healthcare providers (radiologists, nuclear cardiologists or nuclear medicine physicians) trained in the use of nuclear medicine imaging devices. This software also processes, display and performs quantitative calculations of LVEF on multigated acquisition blood pool scans (MUGA). ImagenSPECT™ 3.0 is used to quantitate the uptake of 99mTc pyrophosphate in early and late planar and SPECT studies.The ImagenSPECT™ 3.0 system is designed to take nuclear medicine data from commercially available SPECT systems and process the data into a format that can be visualized by a separate computer program or workstation. In addition, quarter-counts, half dose and/or half-time scans can be reconstructed with ImagenSPECT™ 3.0 using resolution recovery, iterative reconstruction and is equivalent to the predicate ImagenSPECT™ (k152503) using half-counts and full counts (full-time scan, half dose/ half-time, full dose).

Dream Sock Software App. The Dream Sock is intended for over-the-counter (OTC) use only in a home environment. It is not intended to provide notification for every episode of the unexpected occurrences of elevated or depressed PR or a low SpO2 level; rather, the Dream Sock is intended to provide a notification only when sufficient data are available for analysis. The notifications and associated data can be used to supplement the decision by caregivers to seek additional guidance for medical care of the infant. The Dream Sock is not intended to replace traditional methods of monitoring, diagnosis or treatment.