The Blood Collection Monitor CM350 is a blood collection device to measure blood volume collected in the blood bag, and clamps the tubing automatically when the collected blood volume reaches the preset target volume. The device is powered by a rechargeable battery.

The Blood Collection Mixer CM735A is an automated blood mixing and weighing device used during blood donation. The device provides efficient mixing of the whole blood collected with the anti-coagulant in the blood bag and automatically clamping the tube when the preset target volume is achieved. The mixer is powered by a rechargeable battery or AC power.

The Data Collection Mixer DCM3000 is an electromechanical blood mixing and weighing device intended to maintain blood homogeneity during blood donation, and automatically clamps tubing when target volume is achieved equipped with convenient as barcode reading and remote control system. The mixer has two operation modes, DATA mode and BASIC mode and operates on dual power sources- AC power adaptor and the rechargeable battery pack.

The MacoSeal SE160 is a specially designed tube sealer for dual purpose use. The device can work as a stand-alone tube sealer and also can be easily configured as a multi-head sealing unit. The devices can be linked in series as many number of devices as users want at spacing between 70 to 95 mm.

The Rapid Seal Model SE330 is a standard bench-top tube sealer with fixed sealing head for high volume use. The device has a sealing head on the front panel.

The Rapid Seal SE340 is a multiple station bench-top tube sealer with fixed sealing head and hand-held sealing unit. When blood bag tubing is placed in the sealing head, tubing melts in about one second and then cools to form a seal. At hand sealing unit, pulling trigger lever starts sealing process. After tubing melts and a seal is formed, indication lamp turns off.

The Rapid Seal SE470 is a compact and lightweight tube sealer with a hand unit. The device is specially designed to seal the cord blood freezing bags and tubing. Long and slim sealing head is suitable for sealing the channels between two compartments of bag.

The Rapid Seal SE530 is a space saving bench-top tube sealer with fixed sealing head makes it for use in a limited space. The unit can work as a stand-alone device and also can be easily linked as a multi-head sealing unit as user want.

The Rapid Seal SE540 is a space saving bench-top tube sealer with fixed sealing head and hand-held sealing unit. The device is specially designed sealers for dual purpose use. The device can be work as a stand-alone device and also the devices can be linked in series as many numbers of sealers as users want.

The Rapid Seal Tube Sealer SE640 is a lightweight portable sealing device with a hand unit to seal the blood bag tubing and PVC tubes. The device is powered by a rechargeable battery pack.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

It is used for the quantitative determination of the residual white blood cell (leukocyte) count in a human specimen using ADAM-rWBC.

ADAM-rWBC is a device to count white blood cell. It is used with ADAM-rWBC kit.

The ADAM-rWBC HT residual leukocyte counter is a designed for counting residual white blood cells (rWBCs) in leukoreduced blood products.

ADAM-rWBC System is composted ADAM-rWBC(equipment) and ADAM-rWBC kit (reagent). This system is intended to be used for the qualitative determination of the residual white blood cell (leukocyte) count in human specimen.

ADAM-rWBC2 is a device to count white blood cell. It is used with ADAM-rWBC Kit.

ADAM-rWBC2 System is composted ADAM-rWBC2(equipment) and ADAM-rWBC Kit (reagent). This system is intended to be used for the qualitative determination of the residual white blood cell (leukocyte) count in the human specimen.

ADAMII is a device to count stained CD series (e.g. CD34, CD3, CD4, CD8, CD45, etc.) in human sample as an aid in the management of patients.

It is used for the quantitative determination of the residual white blood cell (leukocyte) count in a human specimen using ADAM-rWBC HT.

The r-Control RBC and PLT consists of red blood cell (RBC) Low & RBC High process controls and platelet (PLT) Low & PLT High process controls. It is intended for use with ADAM-rWBC Kit to monitor the process for enumeration of residual leukocytes in leukocyte reduced RBC and PLT products, including dilution, staining, instrument setup, and white blood cell (WBC) enumeration. For in vitro diagnostic use only.

ADAMII-CD34 Kit provides enumeration of viable CD34+ cells, viable CD45+ cells, and calculates percentage of viable CD34+ cells out of viable CD45+ cells. ADAMII-CD34 Kit can be used for mobilized peripheral blood (MPB) collected in Na-Heparin or EDTA, haematopoietic progenitor cell – apheresis (HPC-A) collected in ACD or ACD+Heparin, fresh cord blood (FCB) collected in CPD, and thawed frozen cord blood (TFCB) collected in CPD and stored with 10% DMSO, 1% Dextran 40.

The C-Chip is a disposable plastic chamber used for blood cell (Erythrocyte, Leukocyte) counting. It consists of surface-patterned two enclosed chambers with two ports for sample injection. The DHC-B01 grid pattern is exactly the same as the Burker. It consists of 9 large squares, each measuring 1 x 1 mm, and the depth of the chamber is 0.1 mm. Each square has a total volume of 0.1 mm3 or 10-4 cm3.The large squares are subdivided into 16 group squares with 0.2 mm sides. The group squares correspond in size to the Neubauer grid but have no further subdivisions.

The C-Chip is a disposable plastic chamber used for blood cell (Erythrocyte, Leukocyte) counting. It consists of surface-patterned two enclosed chambers with two ports for sample injection. The DHC-B02 grid pattern is exactly the same as the Burker-Turk. It consists of 9 large squares, each measuring 1 x 1 mm and the depth of the chamber is 0.1 mm. Each square has a total volume of 0.1 mm3 or 10-4 cm3.The large squares are subdivided into 16 group squares with 0.2 mm sides. In the central large square, each group is subdivided into 16 mini squares with 0.05 mm sides (=0.0025 mm2).

The DHC-B04 grid pattern is exactly same as the Burker. It consists of 9 large squares, each measuring 1 x 1 mm, and the depth of the chamber is 0.1 mm. Each square has a total volume of 0.1 mm3 or 10-4 cm3.

The DHC-B0420 grid pattern is exactly same as the Burker. It consists of 9 large squares, each measuring 1 x 1 mm, and the depth of the chamber is 0.1 mm. Each square has a total volume of 0.1 mm3 or 10-4 cm3.

The C-Chip is a disposable plastic chamber used for blood cell (Erythrocyte, Leukocyte) counting. It consists of surface-patterned two enclosed chambers with two ports for sample injection. The DHC-F01 grid pattern is exactly the same as the Fuchs-Rosenthal. It consists of 16 large squares orientated by triple lines, each measuring 1 x 1 mm, giving a total area 4 x 4 mm.

The DHC-F04 grid pattern is exactly the same as the Fuchs-Rosenthal. It consists of 16 large squares orientated by triple lines, each measuring 1 x 1 mm, giving a total area 4 x 4 mm.

The DHC-F0420 grid pattern is exactly the same as the Fuchs-Rosenthal. It consists of 16 large squares orientated by triple lines, each measuring 1 x 1 mm, giving a total area 4 x 4 mm.

The C-Chip is a disposable plastic chamber used for blood cell (Erythrocyte, Leukocyte) counting. It consists of surface-patterned two enclosed chambers with two ports for sample injection. The DHC-M01 grid pattern is exactly same as the Malassez. It consists of 25 large squares, each measuring 0.2 x 0.25 mm and the depth of the chamber is 0.2 mm. Each square has a total volume of 0.01 mm3 or 10-5 cm3.The large squares are subdivided into 20 small squares with an area of 0.0025 mm2.Cells per mL = average count per large square x dilution factor x 105 (dilution factor)

The C-Chip is a disposable plastic chamber used for blood cell (Erythrocyte, Leukocyte) counting. It consists of surface-patterned two enclosed chambers with two ports for sample injection. The DHC-N01 grid pattern is exactly same as the Neubauer Improved. It consists of 9 large squares, each measuring 1 x 1 mm, and the depth of the chamber is 0.1 mm. Each square has a total volume of 0.1 mm3 or 10-4 cm3 (Fig. 1). The central square is divided into 25 small squares with triple lines and four corner squares are divided into 16 small squares.

The DHC-N04 grid pattern is exactly same as the Neubauer Improved. It consists of 9 large squares, each measuring 1 x 1 mm, and the depth of the chamber is 0.1 mm. Each square has a total volume of 0.1 mm3 or 10-4 cm3.

The DHC-N0420 grid pattern is exactly same as the Neubauer Improved. It consists of 9 large squares, each measuring 1 x 1 mm, and the depth of the chamber is 0.1 mm. Each square has a total volume of 0.1 mm3 or 10-4 cm3.