Mounting Medium is a toluene-based rapid-drying mounting medium. It is miscible with all clearing agents including xylene substitutes. This mounting medium is optically clear and will not cause fading of stains even after prolonged storage.

Neg-50™ is formulated to yield high-quality sections even down to -50°C without chatter and is available in blue, green, orange, pink, yellow and colorless.

Neg-50™ is formulated to yield high-quality sections even down to -50°C without chatter and is available in blue, green, orange, pink, yellow and colorless.

Cytoseal™ XYL is a xylene-based mounting medium that contains an antioxidant to inhibit the fading or yellowing of stained specimens. It is a rapid-drying medium allowing microscopic examination of slides soon after application.

Tissue Section Adhesive is for use in the water bath to increase the affinity of the tissue for the slide. Pre-mixed and ready-to-use, this adhesive will not interfere with staining reactions and does not create background residue. It also improves adhesion for techniques utilizing heat. Do not use this product with pre-coated slides.

Bouin’s Fluid is used as a primary fixative or as a mordant when doing special stains such as Masson’s Trichrome.

Acetone is specifically designed for laboratory procedures. The product is a clear, colorless reagent that is highly quality controlled. Acetone is a known toxin. Ingestion may result in blindness or death. Precaution should be taken when handling Acetone. Protective gloves should be worn and work should be performed in a ventilated area. Acetone is a highly flammable product and must be stored in a flammable fire cabinet.

Acetone is specifically designed for laboratory procedures. The product is a clear, colorless reagent that is highly quality controlled. Acetone is a known toxin. Ingestion may result in blindness or death. Precaution should be taken when handling Acetone. Protective gloves should be worn and work should be performed in a ventilated area. Acetone is a highly flammable product and must be stored in a flammable fire cabinet.

Acetone is specifically designed for laboratory procedures. The product is a clear, colorless reagent that is highly quality controlled. Acetone is a known toxin. Ingestion may result in blindness or death. Precaution should be taken when handling Acetone. Protective gloves should be worn and work should be performed in a ventilated area. Acetone is a highly flammable product and must be stored in a flammable fire cabinet.

Dehydrant Alcohol product lines are specifically designed for tissue processing and staining of histological and cytological specimens. The products are a clear, colorless blend of ethyl, isopropyl, and methyl alcohol that in some cases have trace amounts of other denatured materials. All Dehydrant Alcohol products are non-controlled substances and do not require record keeping. The formulations are readily miscible with water to form any desired grade of alcohol and can be used with all clearing reagents. The Dehydrant Alcohol line can be used with both open and closed tissue processors. Protective gloves should be worn and work should be performed in a ventilated area. Dehydrant Alcohol is a flammable product and must be stored in a flammable fire cabinet. The Dehydrant Alcohol product line can also be used for hydrating and dehydrating tissue sections during staining. They can be used with all special stains that require dehydration, as solvents for preparing special stains, and immunohistochemical procedures that are compatible with alcoholic dehydrants. The Dehydrant Alcohol product line can be substituted in place of any alcohol you are presently using for hematoxylin and eosin-y staining. They are compatible with all manual procedures and automatic stainers

Denatured Ethyl Alcohol is specifically designed for tissue processing and staining of histological and cytological specimens. The product is a clear, colorless reagent that is quality controlled. Denatured Ethyl Alcohol contains methyl alcohol, a known toxin. Precaution should be taken when handling Denatured Ethyl Alcohol. Protective gloves should be worn and work should be performed in a ventilated area. Denatured Ethyl Alcohol can be used with both open and closed tissue processors. It is also compatible with all manual staining procedures and automatic stainers. Denatured Ethyl Alcohol is a flammable product and must be stored in a flammable fire cabinet

Denatured Ethyl Alcohol is specifically designed for tissue processing and staining of histological and cytological specimens. The product is a clear, colorless reagent that is quality controlled. Denatured Ethyl Alcohol contains methyl alcohol, a known toxin. Precaution should be taken when handling Denatured Ethyl Alcohol. Protective gloves should be worn and work should be performed in a ventilated area. Denatured Ethyl Alcohol can be used with both open and closed tissue processors. It is also compatible with all manual staining procedures and automatic stainers. Denatured Ethyl Alcohol is a flammable product and must be stored in a flammable fire cabinet

Denatured Ethyl Alcohol is specifically designed for tissue processing and staining of histological and cytological specimens. The product is a clear, colorless reagent that is quality controlled. Denatured Ethyl Alcohol contains methyl alcohol, a known toxin. Precaution should be taken when handling Denatured Ethyl Alcohol. Protective gloves should be worn and work should be performed in a ventilated area. Denatured Ethyl Alcohol can be used with both open and closed tissue processors. It is also compatible with all manual staining procedures and automatic stainers. Denatured Ethyl Alcohol is a flammable product and must be stored in a flammable fire cabinet

Denatured Ethyl Alcohol is specifically designed for tissue processing and staining of histological and cytological specimens. The product is a clear, colorless reagent that is quality controlled. Denatured Ethyl Alcohol contains methyl alcohol, a known toxin. Precaution should be taken when handling Denatured Ethyl Alcohol. Protective gloves should be worn and work should be performed in a ventilated area. Denatured Ethyl Alcohol can be used with both open and closed tissue processors. It is also compatible with all manual staining procedures and automatic stainers. Denatured Ethyl Alcohol is a flammable product and must be stored in a flammable fire cabinet.

Formaldehyde is a colorless gas used in a 37-40% solution in water for tissue fixation.

Formaldehyde is a colorless gas used in a 37-40% solution in water for tissue fixation.

Formaldehyde is a colorless gas used in a 37-40% solution in water for tissue fixation.

Neutral Buffered Formalin (NBF) is a general primary fixative for tissue specimens. A fixative is a chemical solution that stabilizes protein by preventing tissue autolysis and preserving the tissue in a lifelike manner. Size and Quantity: 3.8 L / 1 gal - bottle

Neutral Buffered Formalin (NBF) is a general primary fixative for tissue specimens. A fixative is a chemical solution that stabilizes protein by preventing tissue autolysis and preserving the tissue in a lifelike manner.Size and Quantity: 19 L - 5 gal - cube

Dehydrant Alcohol product lines are specifically designed for tissue processing and staining of histological and cytological specimens. The products are a clear, colorless blend of ethyl, isopropyl, and methyl alcohol that in some cases have trace amounts of other denatured materials. All Dehydrant Alcohol products are non-controlled substances and do not require record keeping. The formulations are readily miscible with water to form any desired grade of alcohol and can be used with all clearing reagents. The Dehydrant Alcohol line can be used with both open and closed tissue processors. Protective gloves should be worn and work should be performed in a ventilated area. Dehydrant Alcohol is a flammable product and must be stored in a flammable fire cabinet. The Dehydrant Alcohol product line can also be used for hydrating and dehydrating tissue sections during staining. They can be used with all special stains that require dehydration, as solvents for preparing special stains, and immunohistochemical procedures that are compatible with alcoholic dehydrants. The Dehydrant Alcohol product line can be substituted in place of any alcohol you are presently using for hematoxylin and eosin-y staining. They are compatible with all manual procedures and automatic stainers.

Dehydrant Alcohol product lines are specifically designed for tissue processing and staining of histological and cytological specimens. The products are a clear, colorless blend of ethyl, isopropyl, and methyl alcohol that in some cases have trace amounts of other denatured materials. All Dehydrant Alcohol products are non-controlled substances and do not require record keeping. The formulations are readily miscible with water to form any desired grade of alcohol and can be used with all clearing reagents. The Dehydrant Alcohol line can be used with both open and closed tissue processors. Protective gloves should be worn and work should be performed in a ventilated area. Dehydrant Alcohol is a flammable product and must be stored in a flammable fire cabinet. The Dehydrant Alcohol product line can also be used for hydrating and dehydrating tissue sections during staining. They can be used with all special stains that require dehydration, as solvents for preparing special stains, and immunohistochemical procedures that are compatible with alcoholic dehydrants. The Dehydrant Alcohol product line can be substituted in place of any alcohol you are presently using for hematoxylin and eosin-y staining. They are compatible with all manual procedures and automatic stainers.

Dehydrant Alcohol product lines are specifically designed for tissue processing and staining of histological and cytological specimens. The products are a clear, colorless blend of ethyl, isopropyl, and methyl alcohol that in some cases have trace amounts of other denatured materials. All Dehydrant Alcohol products are non-controlled substances and do not require record keeping. The formulations are readily miscible with water to form any desired grade of alcohol and can be used with all clearing reagents. The Dehydrant Alcohol line can be used with both open and closed tissue processors. Protective gloves should be worn and work should be performed in a ventilated area. Dehydrant Alcohol is a flammable product and must be stored in a flammable fire cabinet. The Dehydrant Alcohol product line can also be used for hydrating and dehydrating tissue sections during staining. They can be used with all special stains that require dehydration, as solvents for preparing special stains, and immunohistochemical procedures that are compatible with alcoholic dehydrants. The Dehydrant Alcohol product line can be substituted in place of any alcohol you are presently using for hematoxylin and eosin-y staining. They are compatible with all manual procedures and automatic stainers

Dehydrant Alcohol product lines are specifically designed for tissue processing and staining of histological and cytological specimens. The products are a clear, colorless blend of ethyl, isopropyl, and methyl alcohol that in some cases have trace amounts of other denatured materials. All Dehydrant Alcohol products are non-controlled substances and do not require record keeping. The formulations are readily miscible with water to form any desired grade of alcohol and can be used with all clearing reagents. The Dehydrant Alcohol line can be used with both open and closed tissue processors. Protective gloves should be worn and work should be performed in a ventilated area. Dehydrant Alcohol is a flammable product and must be stored in a flammable fire cabinet. The Dehydrant Alcohol product line can also be used for hydrating and dehydrating tissue sections during staining. They can be used with all special stains that require dehydration, as solvents for preparing special stains, and immunohistochemical procedures that are compatible with alcoholic dehydrants. The Dehydrant Alcohol product line can be substituted in place of any alcohol you are presently using for hematoxylin and eosin-y staining. They are compatible with all manual procedures and automatic stainers

Dehydrant Alcohol product lines are specifically designed for tissue processing and staining of histological and cytological specimens. The products are a clear, colorless blend of ethyl, isopropyl, and methyl alcohol that in some cases have trace amounts of other denatured materials. All Dehydrant Alcohol products are non-controlled substances and do not require record keeping. The formulations are readily miscible with water to form any desired grade of alcohol and can be used with all clearing reagents. The Dehydrant Alcohol line can be used with both open and closed tissue processors. Protective gloves should be worn and work should be performed in a ventilated area. Dehydrant Alcohol is a flammable product and must be stored in a flammable fire cabinet. The Dehydrant Alcohol product line can also be used for hydrating and dehydrating tissue sections during staining. They can be used with all special stains that require dehydration, as solvents for preparing special stains, and immunohistochemical procedures that are compatible with alcoholic dehydrants. The Dehydrant Alcohol product line can be substituted in place of any alcohol you are presently using for hematoxylin and eosin-y staining. They are compatible with all manual procedures and automatic stainers.

Dehydrant Alcohol product lines are specifically designed for tissue processing and staining of histological and cytological specimens. The products are a clear, colorless blend of ethyl, isopropyl, and methyl alcohol that in some cases have trace amounts of other denatured materials. All Dehydrant Alcohol products are non-controlled substances and do not require record keeping. The formulations are readily miscible with water to form any desired grade of alcohol and can be used with all clearing reagents. The Dehydrant Alcohol line can be used with both open and closed tissue processors. Protective gloves should be worn and work should be performed in a ventilated area. Dehydrant Alcohol is a flammable product and must be stored in a flammable fire cabinet. The Dehydrant Alcohol product line can also be used for hydrating and dehydrating tissue sections during staining. They can be used with all special stains that require dehydration, as solvents for preparing special stains, and immunohistochemical procedures that are compatible with alcoholic dehydrants. The Dehydrant Alcohol product line can be substituted in place of any alcohol you are presently using for hematoxylin and eosin-y staining. They are compatible with all manual procedures and automatic stainers.

Dehydrant Alcohol product lines are specifically designed for tissue processing and staining of histological and cytological specimens. The products are a clear, colorless blend of ethyl, isopropyl, and methyl alcohol that in some cases have trace amounts of other denatured materials. All Dehydrant Alcohol products are non-controlled substances and do not require record keeping. The formulations are readily miscible with water to form any desired grade of alcohol and can be used with all clearing reagents. The Dehydrant Alcohol line can be used with both open and closed tissue processors. Protective gloves should be worn and work should be performed in a ventilated area. Dehydrant Alcohol is a flammable product and must be stored in a flammable fire cabinet. The Dehydrant Alcohol product line can also be used for hydrating and dehydrating tissue sections during staining. They can be used with all special stains that require dehydration, as solvents for preparing special stains, and immunohistochemical procedures that are compatible with alcoholic dehydrants. The Dehydrant Alcohol product line can be substituted in place of any alcohol you are presently using for hematoxylin and eosin-y staining. They are compatible with all manual procedures and automatic stainers

Dehydrant Alcohol product lines are specifically designed for tissue processing and staining of histological and cytological specimens. The products are a clear, colorless blend of ethyl, isopropyl, and methyl alcohol that in some cases have trace amounts of other denatured materials. All Dehydrant Alcohol products are non-controlled substances and do not require record keeping. The formulations are readily miscible with water to form any desired grade of alcohol and can be used with all clearing reagents. The Dehydrant Alcohol line can be used with both open and closed tissue processors. Protective gloves should be worn and work should be performed in a ventilated area. Dehydrant Alcohol is a flammable product and must be stored in a flammable fire cabinet. The Dehydrant Alcohol product line can also be used for hydrating and dehydrating tissue sections during staining. They can be used with all special stains that require dehydration, as solvents for preparing special stains, and immunohistochemical procedures that are compatible with alcoholic dehydrants. The Dehydrant Alcohol product line can be substituted in place of any alcohol you are presently using for hematoxylin and eosin-y staining. They are compatible with all manual procedures and automatic stainers

Dehydrant Alcohol product lines are specifically designed for tissue processing and staining of histological and cytological specimens. The products are a clear, colorless blend of ethyl, isopropyl, and methyl alcohol that in some cases have trace amounts of other denatured materials. All Dehydrant Alcohol products are non-controlled substances and do not require record keeping. The formulations are readily miscible with water to form any desired grade of alcohol and can be used with all clearing reagents. The Dehydrant Alcohol line can be used with both open and closed tissue processors. Protective gloves should be worn and work should be performed in a ventilated area. Dehydrant Alcohol is a flammable product and must be stored in a flammable fire cabinet. The Dehydrant Alcohol product line can also be used for hydrating and dehydrating tissue sections during staining. They can be used with all special stains that require dehydration, as solvents for preparing special stains, and immunohistochemical procedures that are compatible with alcoholic dehydrants. The Dehydrant Alcohol product line can be substituted in place of any alcohol you are presently using for hematoxylin and eosin-y staining. They are compatible with all manual procedures and automatic stainers

Dehydrant Alcohol product lines are specifically designed for tissue processing and staining of histological and cytological specimens. The products are a clear, colorless blend of ethyl, isopropyl, and methyl alcohol that in some cases have trace amounts of other denatured materials. All Dehydrant Alcohol products are non-controlled substances and do not require record keeping. The formulations are readily miscible with water to form any desired grade of alcohol and can be used with all clearing reagents. The Dehydrant Alcohol line can be used with both open and closed tissue processors. Protective gloves should be worn and work should be performed in a ventilated area. Dehydrant Alcohol is a flammable product and must be stored in a flammable fire cabinet. The Dehydrant Alcohol product line can also be used for hydrating and dehydrating tissue sections during staining. They can be used with all special stains that require dehydration, as solvents for preparing special stains, and immunohistochemical procedures that are compatible with alcoholic dehydrants. The Dehydrant Alcohol product line can be substituted in place of any alcohol you are presently using for hematoxylin and eosin-y staining. They are compatible with all manual procedures and automatic stainers.

Dehydrant Alcohol product lines are specifically designed for tissue processing and staining of histological and cytological specimens. The products are a clear, colorless blend of ethyl, isopropyl, and methyl alcohol that in some cases have trace amounts of other denatured materials. All Dehydrant Alcohol products are non-controlled substances and do not require record keeping. The formulations are readily miscible with water to form any desired grade of alcohol and can be used with all clearing reagents. The Dehydrant Alcohol line can be used with both open and closed tissue processors. Protective gloves should be worn and work should be performed in a ventilated area. Dehydrant Alcohol is a flammable product and must be stored in a flammable fire cabinet. The Dehydrant Alcohol product line can also be used for hydrating and dehydrating tissue sections during staining. They can be used with all special stains that require dehydration, as solvents for preparing special stains, and immunohistochemical procedures that are compatible with alcoholic dehydrants. The Dehydrant Alcohol product line can be substituted in place of any alcohol you are presently using for hematoxylin and eosin-y staining. They are compatible with all manual procedures and automatic stainers.

Clear-Rite, Citrus Clearing Solvent, Xylene Substitute, Xylene, and Toluene are a group of solvents known to act as clearing reagents in the histology laboratory for tissue processing and staining. These clearing reagents are used to “clear” tissue or make it permeable to paraffin in tissue processing. In staining, Clearants are used after alcohol which dehydrates the tissue to enable the slide to be cover slipped with a resinous mounting media.

Clear-Rite, Citrus Clearing Solvent, Xylene Substitute, Xylene, and Toluene are a group of solvents known to act as clearing reagents in the histology laboratory for tissue processing and staining. These clearing reagents are used to “clear” tissue or make it permeable to paraffin in tissue processing. In staining, Clearants are used after alcohol which dehydrates the tissue to enable the slide to be cover slipped with a resinous mounting media.

Clear-Rite, Citrus Clearing Solvent, Xylene Substitute, Xylene, and Toluene are a group of solvents known to act as clearing reagents in the histology laboratory for tissue processing and staining. These clearing reagents are used to “clear” tissue or make it permeable to paraffin in tissue processing. In staining, Clearants are used after alcohol which dehydrates the tissue to enable the slide to be cover slipped with a resinous mounting media.

HistoGel is a gel-based embedding and processing medium that encapsulates and retains the entire specimen during histological processing. HistoGel should be a consistently translucent gelatin material with a slightly pink color.

HistoGel is a gel-based embedding and processing medium that encapsulates and retains the entire specimen during histological processing. HistoGel should be a consistently translucent gelatin material with a slightly pink color.

10% Neutral Buffered Formalin Prefilled Containers were designed to provide safe, cost-effective transportation, storage, and retrieval of pathology specimens. Prefilled specimen containers are non-sterile clear containers with screw-top lids. Each container is prefilled with 10% Neutral Buffered Formalin which is the industry standard for tissue fixation. The 10% Neutral Buffered Formalin is the traditional formulation for phosphate-buffered formalin.Size and Quality: 784 per case. 20 mL filled to 10 mL. Total: 7.84

10% Neutral Buffered Formalin Prefilled Containers were designed to provide safe, cost-effective transportation, storage, and retrieval of pathology specimens. Prefilled specimen containers are non-sterile clear containers with screw-top lids. Each container is prefilled with 10% Neutral Buffered Formalin which is the industry standard for tissue fixation. The 10% Neutral Buffered Formalin is the traditional formulation for phosphate-buffered formalin.Size and Quantify: 420 per case. 40 mL filled to 20 mL. Total: 8.4 Liters

10% Neutral Buffered Formalin Prefilled Containers were designed to provide safe, cost-effective transportation, storage, and retrieval of pathology specimens. Prefilled specimen containers are non-sterile clear containers with screw-top lids. Each container is prefilled with 10% Neutral Buffered Formalin which is the industry standard for tissue fixation. The 10% Neutral Buffered Formalin is the traditional formulation for phosphate-buffered formalin.Size and Quantity: 300 per case. 60 mL filled to 30 mL. Total: 9 Liters

10% Neutral Buffered Formalin Prefilled Containers were designed to provide safe, cost-effective transportation, storage, and retrieval of pathology specimens. Prefilled specimen containers are non-sterile clear containers with screw-top lids. Each container is prefilled with 10% Neutral Buffered Formalin which is the industry standard for tissue fixation. The 10% Neutral Buffered Formalin is the traditional formulation for phosphate-buffered formalin.Size and Quantity: 240 per case. 90 mL filled to 45 mL. Total: 10.8 Liters

10% Neutral Buffered Formalin Prefilled Containers were designed to provide safe, cost-effective transportation, storage, and retrieval of pathology specimens. Prefilled specimen containers are non-sterile clear containers with screw-top lids. Each container is prefilled with 10% Neutral Buffered Formalin which is the industry standard for tissue fixation. The 10% Neutral Buffered Formalin is the traditional formulation for phosphate-buffered formalin.Size and Quantity: 200 per case. 120 mL filled to 60 mL. Total 12 Liters

Resolve™ Immersion Oil is a clear, colorless oil that allows light transmission throughout most of the UV-VIS spectrum. Resolve Immersion Oil is manufactured using a proprietary process that removes most interfering substances, allowing for superb visualization of microscopic samples under high (oil immersion) magnification. Resolve is available in both low viscosity and high viscosity, is non-drying and non-hardening, and has a refractive index of 1.515. It contains no PCBs, eliminating toxicity and disposal problems. Consult your microscope instruction manual for compatibility. Trak 300™ oil is intended for use with the HEMATRAK® automated differential system. The oil does not contain PCBs and is safe to use with valuable optics. The refractive index is 1.515.

Resolve™ Immersion Oil is a clear, colorless oil that allows light transmission throughout most of the UV-VIS spectrum. Resolve Immersion Oil is manufactured using a proprietary process that removes most interfering substances, allowing for superb visualization of microscopic samples under high (oil immersion) magnification. Resolve is available in both low viscosity and high viscosity, is non-drying and non-hardening, and has a refractive index of 1.515. It contains no PCBs, eliminating toxicity and disposal problems. Consult your microscope instruction manual for compatibility. Trak 300™ oil is intended for use with the HEMATRAK® automated differential system. The oil does not contain PCBs and is safe to use with valuable optics. The refractive index is 1.515.

Resolve™ Immersion Oil is a clear, colorless oil that allows light transmission throughout most of the UV-VIS spectrum. Resolve Immersion Oil is manufactured using a proprietary process that removes most interfering substances, allowing for superb visualization of microscopic samples under high (oil immersion) magnification. Resolve is available in both low viscosity and high viscosity, is non-drying and non-hardening, and has a refractive index of 1.515. It contains no PCBs, eliminating toxicity and disposal problems. Consult your microscope instruction manual for compatibility. Trak 300™ oil is intended for use with the HEMATRAK® automated differential system. The oil does not contain PCBs and is safe to use with valuable optics. The refractive index is 1.515.

Resolve™ Immersion Oil is a clear, colorless oil that allows light transmission throughout most of the UV-VIS spectrum. Resolve Immersion Oil is manufactured using a proprietary process that removes most interfering substances, allowing for superb visualization of microscopic samples under high (oil immersion) magnification. Resolve is available in both low viscosity and high viscosity, is non-drying and non-hardening, and has a refractive index of 1.515. It contains no PCBs, eliminating toxicity and disposal problems. Consult your microscope instruction manual for compatibility. Trak 300™ oil is intended for use with the HEMATRAK® automated differential system. The oil does not contain PCBs and is safe to use with valuable optics. The refractive index is 1.515.

Resolve™ Immersion Oil is a clear, colorless oil that allows light transmission throughout most of the UV-VIS spectrum. Resolve Immersion Oil is manufactured using a proprietary process that removes most interfering substances, allowing for superb visualization of microscopic samples under high (oil immersion) magnification. Resolve is available in both low viscosity and high viscosity, is non-drying and non-hardening, and has a refractive index of 1.515. It contains no PCBs, eliminating toxicity and disposal problems. Consult your microscope instruction manual for compatibility. Trak 300™ oil is intended for use with the HEMATRAK® automated differential system. The oil does not contain PCBs and is safe to use with valuable optics. The refractive index is 1.515.

Resolve™ Immersion Oil is a clear, colorless oil that allows light transmission throughout most of the UV-VIS spectrum. Resolve Immersion Oil is manufactured using a proprietary process that removes most interfering substances, allowing for superb visualization of microscopic samples under high (oil immersion) magnification. Resolve is available in both low viscosity and high viscosity, is non-drying and non-hardening, and has a refractive index of 1.515. It contains no PCBs, eliminating toxicity and disposal problems. Consult your microscope instruction manual for compatibility. Trak 300™ oil is intended for use with the HEMATRAK® automated differential system. The oil does not contain PCBs and is safe to use with valuable optics. The refractive index is 1.515.

Resolve™ Immersion Oil is a clear, colorless oil that allows light transmission throughout most of the UV-VIS spectrum. Resolve Immersion Oil is manufactured using a proprietary process that removes most interfering substances, allowing for superb visualization of microscopic samples under high (oil immersion) magnification. Resolve is available in both low viscosity and high viscosity, is non-drying and non-hardening, and has a refractive index of 1.515. It contains no PCBs, eliminating toxicity and disposal problems. Consult your microscope instruction manual for compatibility. Trak 300™ oil is intended for use with the HEMATRAK® automated differential system. The oil does not contain PCBs and is safe to use with valuable optics. The refractive index is 1.515.

Resolve™ Immersion Oil is a clear, colorless oil that allows light transmission throughout most of the UV-VIS spectrum. Resolve Immersion Oil is manufactured using a proprietary process that removes most interfering substances, allowing for superb visualization of microscopic samples under high (oil immersion) magnification. Resolve is available in both low viscosity and high viscosity, is non-drying and non-hardening, and has a refractive index of 1.515. It contains no PCBs, eliminating toxicity and disposal problems. Consult your microscope instruction manual for compatibility. Trak 300™ oil is intended for use with the HEMATRAK® automated differential system. The oil does not contain PCBs and is safe to use with valuable optics. The refractive index is 1.515.

Resolve™ Immersion Oil is a clear, colorless oil that allows light transmission throughout most of the UV-VIS spectrum. Resolve Immersion Oil is manufactured using a proprietary process that removes most interfering substances, allowing for superb visualization of microscopic samples under high (oil immersion) magnification. Resolve is available in both low viscosity and high viscosity, is non-drying and non-hardening, and has a refractive index of 1.515. It contains no PCBs, eliminating toxicity and disposal problems. Consult your microscope instruction manual for compatibility. Trak 300™ oil is intended for use with the HEMATRAK® automated differential system. The oil does not contain PCBs and is safe to use with valuable optics. The refractive index is 1.515.