DROP SEAT - MAXX RAIL

Desk to Full Armrest Extension Kit. Armrest Extension tube (insert) to allow longer tube lengths for mounting full length arm pads or to allow for greater arm pad depth adjustment. Mounting hardware included. Kit contains one extension tube

The Tilt Cantilever Armrest Assembly for Endomorph Canes are Height and Angle Adjustable and mount onto the tilt back canes on a Motion Concepts power positioning system configured with Tilt. Armrest configurations available in Left, Right or Sets. The cantilever armrests can be rotated backwards to provide clearance for side transfers. Armrests available with straight tubes or 4" drop tubes (with a 4" downward offset in the armrest tube).

Cane Mounted Cantilever Armrests are attached to the wheelchair recline back canes (upper and lower mounting points) . Cantilever armrests can be rotated/flipped backwards to provide clearance for side transfers. Armrests are height and angle adjustable. (3 height ranges available: 9.5"-12", 10"-13", 13"-16"). Left and Right armrest configurations available. Optional wheelchair component for use with Motion Concepts power positioning systems

Individual 6" Curved Calf Pads (Set) for use with various Motion Concepts independent legrests. Fabric covered foam pad. One-size. Mounting hardware included.

Width adjustable Legrest Hanger Kits designed for use with Motion Concepts Center Mount (CM) Legrest assemblies. Available in a range of sizes: Mini (10-15W); Standard (16-22W); Bariatric, Wide (20-24W) and Bariatric, X-Wide (24-34W). Wheelchair component designed for use with Motion Concepts power positioning systems.

Waterfall Arm Pads (Highly durable skinned polyurethane resists cracking and peeling and provides extra comfort and protection for arms). Waterfall Arm Pads are available in Desk length 10" or Full length 14". Mounting hardware included. Depth adjustable Optional wheelchair component for use with Motion Concepts power positioning systems

The Dual Post Armrest (lower) Assembly mounts to the seat side rail of the Motion Concepts power positioning system configured with a Tilt function. The Dual Post armrest can be rotated backwards to provide clearance for side transfers. Dual Post Armrests are available in 2 adjustable height ranges: 9"-13", 12"-15", Left and Right Armrest configurations are available.

Ergonomic Arm Trough and Hand Pad Kit (Kit includes molded, skinned polyurethane arm trough designed to fit the natural arm curvature, together with a skinned polyurethane flat hand pad). Left and Right Kit configurations available.. Mounting hardware included. Depth and width adjustable. (The Flat Hand Pad and Arm Ergonomic Arm Trough are also available (sold) separately).

Ergonomic Arm Trough (Molded, skinned polyurethane arm pad designed to fit the natural arm curvature; elbow cut-out allows for various arm positions)Left and right arm trough configurations available.. Mounting hardware included. Depth and width adjustable. Optional Flat Hand Pad available (sold separately).

MACES Back Interface Kit includes mounting hardware to affix a Matrx Elite back (width range of 14W-18W) onto a Motion Concepts Power Positioning System with Recline. MACES hardware allows the for full rotational (multi-axis) angle adjustment of the back support.

Individual Flat Calf Pads (Set) for use with various Motion Concepts Legrests (individual or centre mount). Fabric covered foam pad. Available in a wide range of pad sizes.

Optional CM Legrest, Flip-Up Platform Mount (Lower Assembly) installs onto the LNX Power Center Mount Legrest (Upper Assy) or Fixed CM Legrest (Upper Assy). Long and Short Knee-to-Heel Options available. (Foot platform sold separately). Wheelchair component for use with Motion Concepts Power Positioning Systems

Flat Hand Pad. (Molded, skinned polyurethane hand pad designed for use in combination with the Ergonomic Arm Trough (sold separately)). The Flat Hand Pad is compatible with Left or Right Arm Troughs. Mounting hardware is included.

Gel Arm Pads. (Fabric covered polymer gel arm pads provide extra protection for highly sensitive arms). Available in 3 models: Standard Narrow: 2" x 12"; Standard Wide: 3.5" x 12"; and Long Wide: 3.5" x 14". Mounting hardware included. Depth adjustable. Optional wheelchair component for use with Motion Concepts power positioning systems.

Heavy-Duty 70° Swing Away Legrest Set. Set includes 2 upper down tube assemblies and 2 extension tube assemblies. Hardware included. Three extension tube options/sizes available: 11"-15", 13"-17", 16"-20". Footplates and footplate mounts sold separately.

Individual Calf Pad Mount Assy for use with the LNX Power Center Mount Legrest (upper assy) or MINI LNX Power CM Legrest (upper assy). Mounting hardware included. Standard LNX Calf Pad Mount Assy includes Independent Calf Pads (x2). Calf Pads are not included (purchased separately) with the MINI LNX Calf Pad Mount Assy.

Independent Footplate Mount (Lower Assembly) installs onto the LNX Power Center Mount Legrest (Upper Assy) or Fixed CM Legrest (Upper Assy). Available in Long and Short Knee-to-Heel Ranges. Individual foot plates sold separately. Wheelchair component for use with Motion Concepts Power Positioning Systems

Independent Footplate Mount (Lower Assembly) designed for use with the MINI LNX Power Center Mount Legrest (Upper Assy). Available for Short Knee-to-Heel Lengths. Individual foot plates sold separately. Wheelchair component for use with Motion Concepts Power Positioning Systems

Legrest Receivers for use with Motion Concepts Independent Legrests assemblies. Components may be ordered individually (left and right) or in sets. Offset and straight legrest receiver options available. Wheelchair component designed for use with Motion Concepts power positioning systems.

Optional Bariatric Pivoting Calf Panel Assembly for use with the LNX Power Center Mount Legrest (upper assy) or the Compact Power Down LNX CM Legrest. Includes mounting hardware. Padded Calf Panel sold separately. Optional wheelchair component designed for use with Motion Concepts power positioning systems.

Modular Startex Arm Pads. (Startex fabric covered visco-elastic foam arm pads for extra comfort). Modular Armpads are available in Desk length 10" or Full length 14". Mounting hardware included. Depth and width adjustable. Left and Right armrest configurations available. Optional wheelchair component for use with Motion Concepts power positioning systems.

Modular Arm Pads (Highly durable skinned polyurethane resists cracking and peeling and provides extra comfort and protection for arms)Modular I-Skin Armpads are available in Desk length 10" or Full length 14". Mounting hardware included. Depth and width adjustable. Left and Right armrest configurations available. Optional wheelchair component for use with Motion Concepts power positioning systems.

Matrx Back Recline Interface Kit (includes mounting hardware to affix a Matrx Elite, PB, E2 standard, E2 Mini, and Mini Back onto a Motion Concepts Power Positioning System with Recline canes. Must specify the type of Matrx back being installed (Interface kits vary depending on Back model).

Recline Spreader Mounting Assembly is designed for use with Recline Canes on Motion Concepts Adult and Mini Power Positioning Systems (PPS) configured with a Recline function. The Recline Spreader Mounting Assy is utilized for mounting Rehab Backs onto a Recline system.. The Recline Spreader assemblies are available in a wide range of widths for applications on the Mini Maxx PPS and our Adult Maxx PPS.

Matrx Back Interface Kit includes mounting hardware to affix a Matrx Elite, PB or E2 Back onto a Motion Concepts Power Positioning System with Tilt canes. Must specify the type of Matrx back being installed (Interface kits vary slightly depending on Back model).

Maxx Style Spreader Assy designed for use with Tilt Canes on Motion Concepts power positioning systems configured with a Tilt function. Maxx Style Tilt-Only Spreader Bar Assy are available in 4 width ranges: 12-16W, 16-22W, 20-26W and 24-30W.

Maxx-Style Cane Mounted Cantilever Armrests are attached to the wheelchair recline back canes (upper and lower mounting points). Cantilever armrests can be rotated/flipped backwards to provide clearance for side transfers. Armrests are height and angle adjustable. (2 height ranges available: 9.5"-13", 12.5"-16"). Left and Right armrest configurations available. Optional wheelchair component for use with Motion Concepts power positioning systems

Individual (moulded i-skin) Calf Pads (Set) for use with Motion Concepts CM Legrests. One-size only. Mounting hardware included.

Optional Multi-Axis Independent Adjustable Angle Footplate Mount (Lower Assembly) installs onto the LNX Power Center Mount Legrest (Upper Assy). Available in Long and Short Knee-to-Heel Ranges. Foot plates included. Wheelchair component for use with Motion Concepts Power Positioning Systems

Optional Multi-Axis Adjustable Angle Footplate Mount (Lower Assembly) for use with Motion Concepts Independent Legrests (Pivot Plus Legrests or HD 70 Swing-Away Legrests). Single Footplate Mount only. Attaches to legrest extension tube. Foot plates sold separately.

Cross Brace Assembly for the MACES Back Interface is designed for use on Motion Concepts Power Positioning Systems configured with a Recline function. The MACES interface is limited to back widths ranging from 14W-20W. MACES hardware allows the for full rotational (multi-axis) angle adjustment of the mounted back support

Multi Position Flat Arm Pads (Highly durable skinned polyurethane resists cracking and peeling and provides extra comfort and protection for arms)Flat Arm Pads are available in Desk length 10" or Full length 14". Mounting hardware included. Depth and width adjustable Optional wheelchair component for use with Motion Concepts power positioning systems.

Optional Manual Transfer Arm Assembly. Installs on the the side rails of the Motion Concepts Power Positioning System. (Weight capacity = 175 lb.) Must be raised and lowered manually. Available for left or right side mounting.

Outback Recline (2-point) Armrest Assembly attaches to the recline back cane and seat side frame. Outback design allows armrest to flip outward and backwards to provide maximum clearance for side transfers. Height Adjustable. Two height ranges available (9"-13" or 13"-16"). Left and Right armrest configurations available. Optional wheelchair component for use with Motion Concepts power positioning systems

Recline (2pt) Body Fit Outback Adjustable Armrest Assembly attach to the recline back cane and seat side frame. The Recline Body Fit Armrest is designed to flip outward and backward to provide maximum clearance for side transfers. The Body Fit bracket design allows for 2" or 4" offset for an enlarged seating area. Two adjustable height ranges are available (9"-13" or 13"-16"). Left and Right armrest configurations available in either 2" and 4" offset.

The Dual Post Outback Tilt Armrest (lower) Assembly mounts to the seat side rail of the Motion Concepts power positioning system configured with a Tilt function. The outback design allows the armrest to rotate outward and backwards to provide maximum clearance for side transfers. (The Upper Dual Post Armrest Tube Assy is sold separately). Left and Right Armrest configurations are available.

Outback Recline Cantilever Armrest Assembly attaches to the recline back cane. Outback design allows armrest to flip outward and backwards to provide maximum clearance for side transfers. Armrest is height and angle adjustable. Two height ranges available (7"-9" and 9"-12.5"). Left and Right armrest configurations available. Optional wheelchair component for use with Motion Concepts power positioning systems

The Outback Tilt Cantilever Height and Angle Adjustable Armrest Assembly mounts to the tilt back canes on a Motion Concepts power positioning system configured with Tilt. The outback design allows the armrest to rotate outward and backwards to provide maximum clearance for side transfers. (Armrest is available in 3 adjustable height ranges: 7"-9", 9"-12", 12"-15").

One-Piece Malleable (i-skin) Calf Panel for use with Motion Concepts CM Legrests. (Bendable/shape-able integral skin foam pad). One-Size only

Stander Outback Drop Cantilever Armrests (set) are attached to the recline back canes on the Motion Concepts Modular Power Standing Systems (MPSS). The outback design allows armrest to flip outward and backwards to provide maximum clearance for side transfers. Armrest is height and angle adjustable. Drop armrest is designed with a 4" downward offset in the armrest tube.

One-Piece Flat Calf Panel Mount Assy designed for use with Motion Concepts CM Legrests (includes mounting hardware). One-Piece Calf Pad sold separately. Available in a variety of widths and heights to accommodate different user needs.

The Pediatric Dual Post Armrest Assembly mounts to the seat side rail of the Motion Concepts power positioning system configured with a Tilt function. The Dual Post armrest can be rotated backwards to provide clearance for side transfers. Pediatric Dual Post Armrests are available in 2 adjustable height ranges: 6.75"-9", 8.5"-18.5", Left and Right Armrest configurations are available.

Optional Power Transfer Arm Assembly. Installs on the the side rails of the Motion Concepts Power Positioning System. (Weight capacity = 175 lb.) Includes actuator motor. Available for left or right side mounting.

Optional Maxx Power Down Center Mount Foot Platform Mount (Lower Assembly) install onto the LNX Center Mount Legrest (Upper Assy) or the Fixed CM Legrest (Upper Assy). Long and Short Knee-to-Heel Options available. (Foot platform sold separately). Optional wheelchair component designed for use with Motion Concepts power positioning systems.

Recline (2-point) Adjustable Height Armrest Assembly attaches to the recline back cane and seat side frame. The Recline Armrest is designed to flip backward to provide clearance for side transfers. Two height ranges available (9"-13" or 13"-16"). Left and Right armrest configurations available. Optional wheelchair component for use with Motion Concepts power positioning systems

Recline (2-point) Body Fit Adjustable Height Armrest Assembly attach to the recline back cane and seat side frame. The Recline Armrest is designed to flip backward to provide clearance for side transfers. The Body Fit bracket design allows for 2" or 4" offset for an enlarged seating area. Two height ranges are available (9.5"-13" or 12.5"-16"). Left and Right armrest configurations available in either 2" and 4" offset.

The Rail Mounted Tilt Cantilever Armrest Assy is Height Adjustable and mounts onto the seat frame side rails on a Motion Concepts power positioning system. Armrest configurations available in Left, Right or Sets. The armrests can be rotated backwards to provide clearance for side transfers. The rail mounted armrests are available in 2 height ranges: 9"-12.5" and 11"-14".

Standard Arm Pads (Faux-vinyl cover PU foam arm pads for comfort and durability). Standard Arm Pads are available in Desk length 10" or Full length 14". Mounting hardware included. Depth adjustable Optional wheelchair component for use with Motion Concepts power positioning systems.

Stander Cane Mounted Cantilever Armrests (Set) are attached to the recline back canes on the Motion Concepts Modular Power Standing Systems (MPSS). Cantilever armrests can be rotated/flipped backwards to provide clearance for side transfers. Armrests are height and angle adjustable.