Tilt-Only Angled Back canes (pair). Back Canes are designed with a 5° angle bend. (Cane height/length options= 20H, 22H, 24H). Wheelchair components for use on on Motion Concepts Power Positioning Systems with Tilt.

Tilt-Only Angled Back Canes (pair) for use on Medium-Adult Systems Back Canes are designed with a 5° angle bend. (Cane height/length options= 20H, 22H, 24H). Wheelchair components for use on on Motion Concepts Power Positioning Systems with Tilt.

Articulating Oxygen (O2) Tank Holder. Wheelchair component designed for use with Motion Concepts Power Positioning Systems configured with a Recline function. O2 holder mounts via linkages/pivots on the back of the wheelchair seating system. (maximum 20lb. weight capacity). Option available for O2 Gas Cylinders or Liquid O2 Tanks

Seat Frame Assembly for the Recline Body-Fit System. The Recline Body-Fit System is designed to allow for installation of narrower (offset) back canes (optional 2" or 4" cane offset available). (A minimum 16H back height required). These wheelchair components are designed for use with Motion Concepts Power Positioning Systems with Recline.

Contour Back, Back Support (Tilt/Recline wheelchair applications)

E2 Carbon Fiber Fixed Mounting Hardware (set). Fixed mounting hardware option for Matrx E2 Carbon Fiber Backs (16H or less). Requires tools to remove. (Fits 3/4", 7/8" or 1" back cane diameters)

E2 Carbon Fiber Removable Mounting Hardware (set); Removable mounting hardware option for Matrx E2 Carbon Fiber Backs (16H or less). Quick-release design. (Fits 3/4", 7/8" or 1" back cane diameters)

Lightweight plastic seat insert fits between seat rails for level support and eliminates hammock effect of seat upholstery. Securely attached to bottom of cushion insidecushion cover

E2 EasySet Removable Mounting Hardware (pair); includes E2 EasySet Mounting Pin Interface Brackets. Optional mounting hardware for Matrx E2 Backs (18H/20H). Quick-release design.

E2 Extended Range Mounting Hardware (pair); includes E2 EasySet Mounting Pin Interface Brackets. Optional hardware for Matrx E2 Backs (18H/20H). Allows for an additional 2" of depth adjustment.

E2 Heavy-Duty EasySet Removable Mounting Hardware (pair); includes E2 EasySet Mounting Pin Interface Brackets. Optional mounting hardware for Matrx E2 Backs (18H/20H). Quick-release design.

E2 MiniSet Removable Mounting Hardware (pair); includes E2 MiniSet Mounting Pin Interface Brackets. Optional mounting hardware for Matrx E2 Backs (16H or less). Quick-release design.

E2 Heavy-Duty MiniSet Removable Mounting Hardware (pair); includes E2 MiniSet Mounting Pin Interface Brackets. Optional mounting hardware for Matrx E2 Backs (18H/20H). Quick-release design.

E2 EasySet Mounting Hardware (pair) designed to install onto 1-1/8" back canes (includes E2 EasySet Mounting Pin Interface Brackets). Optional mounting hardware for Matrx E2 Backs (18H/20H). Quick-release (removable) design.

E2 EasySet Mounting Hardware (pair) designed to install onto 1-1/4" back canes (includes E2 EasySet Mounting Pin Interface Brackets). Optional mounting hardware for Matrx E2 Backs (18H/20H). Quick-release (removable) design.

E2 Split Mounting Hardware (pair); includes E2 EasySet Mounting Pin Interface Brackets. Optional mounting hardware for Matrx E2 Backs (18H/20H). Allows for avoidance of frame obstacles. Quick-release design.

Matrx E2 Standard Back Support with optional Carbon Fiber Back Shell (3" Contour Depth). 300lb. Weight Capacity. (Note: The Carbon Fiber back shell for the 8" height (8H) Matrx E2 Back measures 9" in height (9H)). Matrx E2 Backs provide precise orientation within the wheelchair for optimal postural support. The E2 Back incorporates an innovative Ripple Foam technology, designed to provide temperature control and enhanced immersion for increased comfortable and support.

Tilt-Only Endomorph Back canes (pair). Endomorph Canes are designed to allow for narrower (offset) back mounting. (optional 1", 2" or 3" cane offset available; cane height/length options = 22H or 24H). Wheelchair components for use on on Motion Concepts Power Positioning Systems with Tilt.

Optional Fold-Down Back Cane Kit. Pull-Pin design allows the tilt-only back canes to be folded down (forwarded) for ease of transport. (Optional wheelchair component for use with Motion Concepts Power Positioning Systems)

High Back, Back Support (Tilt/Recline Wheelchair Applications)

Extra/Replacement Cover for Matrx Libra Seat Cushion and Matrx Libra Adjust Seat Cushion

Matrx Libra Seat Cushion. Adjustable Skin Protection & Positioning Cushion (standard and bariatric sizing). Weight capacity: Standard up to 300lb., Heavy-Duty up to 500lb.The Matrx Libra cushion uses a combination of high resilient foam and dual layer fluid sac to provide maximum protection around boney prominences and stability to the pelvis. Recommended for all users including those at highest risk of skin breakdown

Matrx Libra Adjust Seat Cushion (includes 2 fluid supplement packs). Adjustable Skin Protection & Positioning Cushion (standard and bariatric sizing).The Matrx Libra cushion uses a combination of high resilient foam and dual layer fluid sac to provide maximum protection around boney prominences and stability to the pelvis. Recommended for all users including those at highest risk of skin breakdown

Optional Mesomorph Style Back Canes (pair). Canes are designed to allow mounting of Back Supports wider than nominal system width (Available in 1", 2" and 4" offset). Wheelchair components for use on on Motion Concepts Power Positioning Systems with Tilt.

Extra/Replacement Cover for Matrx Multi Seat Cushion.

Matrx Multi Seat Cushion. Positioning Cushion (standard sizing). The Matrx Multi Cushion is designed with unique three part foam combination providing maximum immersion and comfort without sacrificing long lasting durability and support.

Non-Articulating IV Pole Mount. Wheelchair component designed for use with Motion Concepts Power Positioning Systems with Tilt-Only. IV Pole mounts on the back of the wheelchair seating system. (maximum 5lb. weight capacity).

Non-Articulating Oxygen (O2) Tank Holder. Wheelchair component designed for use with Motion Concepts Power Positioning Systems. O2 holder mounts via brackets in a fixed position on the back of the wheelchair seating system. (maximum 20lb. weight capacity)

Interface Kit designed to allow mounting of Matrx Elite Backs onto a Permobil Tilt/Recline wheelchair seating system.

Interface Kit designed to allow mounting of Matrx E2 Backs onto a Permobil Tilt/Recline wheelchair seating system.

Planar Back Interface Plate (Flat or Recessed options available)

Optional Low Profile Power Recline Module (with 30° Precline) for use on Motion Concepts Power Positioning Systems. Precline option increases the 'forward' angle of the back support in the upright position. (NOTE: the maximum system recline angle will be reduced by 30° with this Precline configuration)

Optional Infection Control (Protect) Cover for Matrx E2D (Deep) Backs.

Optional Infection Control (Protect) Cover for Matrx E2S (Standard) Backs.

Optional Infection Control (Protect) Cover for Matrx Cushions (fits all Matrx Cushions).

Optional Power Sliding Back Module with ESR (extended shear reduction) Linkages. (Assembly includes actuator and recline shroud). Installs onto a Motion Concepts Power Recline Module

Interface Kit designed to allow mounting of Matrx Elite Backs onto a Quantum (Pride Mobility) Tilt/Recline wheelchair seating system.

Interface Kit designed to allow mounting of Matrx E2 Backs onto a Quantum (Pride Mobility) Tilt/Recline wheelchair seating system.

Interface Kit designed to allow mounting of Matrx Elite Backs onto a Quickie (Sunrise Medical) Tilt/Recline wheelchair seating system.

Interface Kit designed to allow mounting of Matrx E2 Backs onto a Quickie (Sunrise Medical) Tilt/Recline wheelchair seating system.

Low Profile Power Recline Module for use on Motion Concepts Power Positioning Systems. (Recline Angle Ranges Available: Adult (168°), Mini (161°), Bariatric (150°)).

Low Profile Power Recline Module with Extended Shear Reduction (ESR) for use on Motion Concepts Power Positioning Systems. (Recline Angle Ranges Available: Adult (168°), Mini (161°), Bariatric (150°)).

Tilt-Only Straight Back Canes (pair). (available back cane lengths/heights = 14H, 16H, 18H, 20H, 22H or 24H). Wheelchair components for use on on Motion Concepts Power Positioning Systems with Tilt.

Tilt-Only Straight Back Canes (pair) for use on Mini Seating Systems. (available back cane lengths/heights = 14H, 16H, 18H or 20H). Wheelchair components for use on on Motion Concepts Mini Power Positioning Systems with Tilt.

Straight Back Canes (pair) for use on Medium-Adult Systems. (available back cane lengths/heights = 18H, 20H, 22H, 24H, 30"). Wheelchair components for use on on Motion Concepts Power Positioning Systems with Tilt.

Single Post Back Support (Angle adjustable, fold-down back support). Optional back support interface for use on Motion Concept Power Positioning Systems. Single Post Back Pan assembly provided separately.

Single Post Back Pan Assembly. Back pan assembly for use on Motion Concepts Single Post Back module. Back pans available in two heights (17H or 20H), and back widths from 16W up to 22W.

Standard Rehab Back Support

Tilt-Only Mid-Angle Back canes (pair). Mid-Angle Canes are designed with a 10° mid-angle bend. (back cane height/length options = 18H, 20H, 22H or 24H). Wheelchair components for use on on Motion Concepts Power Positioning Systems with Tilt.

Tilt-Only Mid-Angle Back canes (pair) designed for use on Med-Adult Systems. Mid-Angle Canes are designed with a 10° mid-angle bend. (back cane height/length options = 18H, 20H, 22H or 24H). Wheelchair components for use on on Motion Concepts Power Positioning Systems with Tilt.