CO2 high pressure Tube 102 cm, Storz insufflator connection 7/16"-20UNF on both sides + mounted ISO adapter with sinter filter.A length of flexible tube intended to deliver and withstand gases under very high pressure, e.g., greater than 200 bar/3000 pounds per square inch (psi). It may be composed of any of several malleable or semi-rigid materials (e.g., plastic, rubber, or nylon), and braided with cotton wool and/or stainless steel. It is typically used to transport high pressure compressed medical gas to a pressure regulating device. It is available in various lengths, including standard coil lengths. This is a reusable device.

CO2 high-pressure tube 55 cm, Storz insufflator connection 7/16"-20UNF on both sides + mounted PIN index adapter with sinter filter.A length of flexible tube intended to deliver and withstand gases under very high pressure, e.g., greater than 200 bar/3000 pounds per square inch (psi). It may be composed of any of several malleable or semi-rigid materials (e.g., plastic, rubber, or nylon), and braided with cotton wool and/or stainless steel. It is typically used to transport high pressure compressed medical gas to a pressure regulating device. It is available in various lengths, including standard coil lengths. This is a reusable device.

CO2 high pressure tube 102 cm, Storz insufflator connection 7/16"-20UNF on both sides + mounted PIN index adapter with sinter filter.A length of flexible tube intended to deliver and withstand gases under very high pressure, e.g., greater than 200 bar/3000 pounds per square inch (psi). It may be composed of any of several malleable or semi-rigid materials (e.g., plastic, rubber, or nylon), and braided with cotton wool and/or stainless steel. It is typically used to transport high pressure compressed medical gas to a pressure regulating device. It is available in various lengths, including standard coil lengths. This is a reusable device.

CO2 high pressure tube, Storz Insufflator connection 7/16"-20UNF to W21.8_14 with sinter filter, 55 cm.A length of flexible tube intended to deliver and withstand gases under very high pressure, e.g., greater than 200 bar/3000 pounds per square inch (psi). It may be composed of any of several malleable or semi-rigid materials (e.g., plastic, rubber, or nylon), and braided with cotton wool and/or stainless steel. It is typically used to transport high pressure compressed medical gas to a pressure regulating device. It is available in various lengths, including standard coil lengths. This is a reusable device.

CO2 high pressure tube 102 cm, Storz insufflator connection 7/16"-20UNF on both sides + mounted ISO adapter with sinter filter.A length of flexible tube intended to deliver and withstand gases under very high pressure, e.g., greater than 200 bar/3000 pounds per square inch (psi). It may be composed of any of several malleable or semi-rigid materials (e.g., plastic, rubber, or nylon), and braided with cotton wool and/or stainless steel. It is typically used to transport high pressure compressed medical gas to a pressure regulating device. It is available in various lengths, including standard coil lengths. This is a reusable device.

DBD-TUBING,OXYGEN,14',VIOLET,UC,RETAIL

Aerosol 'T' Adaptor Horizontal Ports - 22 mm O.D. Vertical Port - 15 mm I.D. / 22 mm O.D.

Ventilator Adaptor Elbow Elbow Connections - 15 mm I.D x 22 mm O.D. Section Port - 11.5 mm O.D.

7ft (2.1m) Star Lumen Tubing

STAR LUMEN® Tubing Five-Channel Low-Pressure Medical Gas Supply Tubing 4.2 m ( 14ft. ) Length

STAR LUMEN® Tubing 25 ft. (7.5) Five-Channel Low-Pressure Medical Gas Supply Tubing

STAR LUMEN® Tubing Five-Channel Low-Pressure Medical Gas Supply Tubing 15 m (50ft.) Length

STAR LUMEN® Tubing Five-Channel Low-Pressure Medical Gas Supply Tubing 12 m (40ft.) Length

STAR LUMEN® Tubing Five-Channel Low-Pressure Medical Gas Supply Tubing 9 m (30ft.) Length

CORR-A-TUBE® Reusable Corrugated Tubing 180 cm (72 in.) Length

Drive Line Adaptor

Oxygen Supply Tubing Connectors

Tubing Adaptor, 22 mm I.D.

Nebulizer Tee Connector

Nebulizer Tee Connector

AEROSOL TEE CONNECTOR

In-Line NebTee™ with Valve 22 mm O.D. x 18 mm I.D. x 22 mm I.D.

In-Line NebTee™ with Valve 22 mm O.D. x 18 mm I.D. x 22 mm O.D.

Nebulizer Adaptor 22 mm O.D. x 18 mm O.D.

Neonatal Pressure Line Tee

NEONATAL PRESSURE LINE TEE

Neonatal Nebulizer Adaptor Kit

STAR LUMEN® Tubing Five-Channel Low-Pressure Medical Gas Supply Tubing 2.1 m ( 7ft. ) Length with Universal Connector

STAR LUMEN® Tubing Five-Channel Low-Pressure Medical Gas Supply Tubing 7.5m (25 ft. ) Length with Universal Connector

STAR LUMEN® Tubing Five-Channel Low-Pressure Medical Gas Supply Tubing 15 m (50 ft. ) Length with Universal Connector

Tinted STAR LUMEN® Tubing Five-Channel Low-Pressure Medical Gas Supply Tubing 4.2 m (14 ft.) Length

Tinted STAR LUMEN® Tubing Five-Channel Low-Pressure Medical Gas Supply Tubing 7.5 m (25 ft.) Length

Tinted STAR LUMEN® Tubing Five-Channel Low-Pressure Medical Gas Supply Tubing 9 m (30 ft.) Length

Tinted STAR LUMEN® Tubing Five-Channel Low-Pressure Medical Gas Supply Tubing 12 m (40 ft.) Length

Tinted STAR LUMEN® Tubing Five-Channel Low-Pressure Medical Gas Supply Tubing 15 m (50 ft.) Length

Nipple & Nut Connector

Oxygen Supply Tubing Connector

Flow Meter Adaptor (Yellow) For Threaded Medical Gas Outlets

Aerosol T-Connector

Oxygen Supply Tubing with STAR LUMEN® Tubing

Oxygen Supply Tubing with STAR LUMEN® Tubing

Oxygen Supply Tubing with STAR LUMEN® Tubing

Oxygen Supply Tubing with STAR LUMEN® Tubing

Oxygen Tubing Connector 5mm - 7mm

Nebulizer T-Connector

Aerosol T-Connector

ISO Anti-Spill Tee

STAR LUMEN® Tubing with Universal Connector, 7ft (2.1m)

Tubing, 7 ft., with One Hose End, Bulk

Aerosol Tee, 15mm