Respirometer Guard - Fits Mark 8, 14, 25, HS compact & Phys, w/Closure O-Rings, Black Neoprene

Respirometer Guard - Fits Fraser-Harlake RM 121 & 311, w/Closure O-Rings, Latex

Respirometer Guard - Fits Mark 12, 20, and Haloscale Standard, w/Closure O-Rings, Black Neoprene

Respirometer Guard - Fits Boeringer, w/ Lanyard assembly, Latex

Respirometer, Digital, Wright, Pole Clamp 1/4" to 1", fits 00-294, 00-295

Respirometer, Analog, Haloscale Standard, to 100 liters, Concentric Hands, Large Face

Respirometer, Digital, Wright, Control Unit Only, Mates w/ 00-299, Part of 00-295

Respirometer, Digital, Wright, w/ Sensor, Controller, 9v Battery, 22mmFx22mmF Adapter, to 200 liters.

Respirometer, Digital, Cable, 6' Extended Coil, fits between Sensor & Controller (remove 00-303 Dbl Plug)

Respirometer, Digital, Molded Plastic Carrying Case, with Cut Foam Inserts, Snap Closure

Respirometer, Digital, Wright, Flow Sensing Unit Only, w/Adapter Fitting. Mates w/ 00-294, Part of 00-295

Respirometer, Analog, Mark 14, to 10 liters, Small Face

Respirometer, Analog, Mark 8, to 100 liters, Small Face

Respirometer, Digital, Replacement 'Double Plug', for 00-295 Sensor/Controller, w/Screw.

Respirometer, Analog, Safety Harness w/Strap

Respirometer, Analog, Case, w/ Foam Insert Set

Respirometer, Analog, Case ONLY (No Foam)

Respirometer, Analog, Foam Set ONLY (No Case)

CapMedic is an interactive smart inhaler add-on that provides guidance for correct and regular use. The Bluetooth-connected device can also perform PEF and FEV1 tests to track lung function.

CARESCAPE B450 MBA323 (ATO MODEL)

CARESCAPE B650 MBB323 (ATO MODEL)

CARESCAPE B850 MBC323 (ATO MODEL)

CARESCAPE B850 MBC313 (ATO MODEL)

Wright Respirometer Mk 14

Wright Respirometer Mk 8

Wright Respirometer Haloscale Standard

A noninvasive device designed to continuously measure a patient's tidal volume, minute ventilation, and respiratory rate via impedance pneumography. Designed to be connected to the ExSpiron 1Xi PadSet via the ExSpiron 1Xi Patient Cable, the ExSpiron 1Xi Monitor provides a measurement of a patient's respiratory parameters, while also incorporating alarms. The ExSpiron 1Xi Monitor can be integrated into a medical facility's nurse call system via the ExSpiron 1Xi Nurse Call Module.

Noninvasive, insulated, electrical cable designed to connect the ExSpiron Monitor to the ExSpiron PadSet.

Assembly designed to be integrated into medical facility infrastructure in order to trigger a nurse call alarm system. Designed to be used only with the ExSpiron 1Xi Monitor.

Insulated, reusable, medical grade electrical cord design to enable connection of the ExSpiron 1Xi to a mains electricity supply socket, with a NEMA 5-15P plug and an IEC 60320-C13 connector at either end.

A non-sterile, single use electrode set designed to be adhered across a patient's chest and connected to the ExSpiron Monitor for impedance pneumography. Consists of electrodes and lead wire to allow for impedance measurements across a chest cavity.

A noninvasive device designed to continuously measure a patient's tidal volume, minute ventilation, and respiratory rate via impedance pneumography. Designed to be connected to the ExSpiron PadSet via the ExSpiron Patient Cable, the ExSpiron 2Xi Monitor provides a measurement of a patient's respiratory parameters, while also incorporating alarms. The ExSpiron 2Xi Monitor can be integrated into a medical facility's nurse call system.