Oxygen Analyzer

Gas Sampling Line, Disposable, 6 m/20 ft

Anesthesia Gas Sampling Line, Disposable 2 m/7 ft

Anesthesia Gas Sampling Line, Disposable, 2 m/7 ft

Anesthesia Gas Sampling Line, Disposable 3 m/10 ft

Anesthesia Gas Sampling Line, Disposable 3 m/10 ft

Anesthesia Gas Sampling Line, Disposable, with Male/Male Elbow Connector, 2m/7ft

Single Use Nasal Sampling Line, Pediatric Size, 2m/7ft

Single Use Nasal Sampling Line, Adult Size, 2m/7ft

Single Use Nasal Sampling Line, Large Adult Size, 2m/7ft

Manual Bag Tube for ADU, Reusable

Medical Oxygen Sensor, SERV02 GP

MOX6, Medical Oxygen Sensor

MOX1 Medical Oxygen Sensor

MOX2, Medical Oxygen Sensor

MOX3, Medical Oxygen Sensor

MOX4, Medical Oxygen Sensor

MOX9, Medical Oxygen Sensor

MOX7, Medical Oxygen sensor

MOX1, Medical Oxygen sensor

MOX2, Medical Oxygen sensor

MOX3, Oxygen sensor

MOX4, Medical Oxygen sensor

MOX9, Oxygen sensor

The MT 100 Oxygen Sensor Activation System is designed for use with the Maxtec Handi Oxygen Analyzer. By utilizing a check valve in the Tee Adapter, an airtight seal is maintained in-line, unless actuated by the stem of the activator. This system therefore provides the capability of rapid monitoring of the patient breathing environment without the inconvenience of breaking the ventilation circuit.

Oxygen Analyzer

Medical Oxygen Sensor

Single use connector 22M/15F-15M Gas Sampling Port

Single use 25mm Disk Filter for water trap

Single use 50mm Nebuliser filter

Single use 22mm one-way valve for use with Sensor Medics 3100A/B HFO ventilators

Single use tubing for connection between NOxMixer and NOxFLOW during back up mode

The M2786A in combination with the spirometry module M1014A is designed to allow measurement of airway pressures, flow, minute volume, tidal volume, airway compliance, airway resistance and CO2.

Multi-Parameter Patient Monitoring System

Adult/Pediatric flow sensor. Pack of 10.

Infant flow sensor. Pack of 10.

Neonate flow sensor. Pack of 10.

High flow sensor. Pack of 10.