TC 560 Contact Liquid (20 ml)

The M2786A in combination with the spirometry module M1014A is designed to allow measurement of airway pressures, flow, minute volume, tidal volume, airway compliance, airway resistance and CO2.

CAL gas 6 cyl.

Adapter cable to connect SenTec TC Sensors to the SenTec Digital Monitor. The adapter cable is available in different lengths (XXX=150 cm, 250 cm, 750 cm).

Adapter cable to connect SenTec TC Sensors to the SenTec Digital Monitor. The adapter cable is available in different lengths (XXX=150 cm, 250 cm, 750 cm).

Adapter cable to connect SenTec TC Sensors to the SenTec Digital Monitor. The adapter cable is available in different lengths (XXX=150 cm, 250 cm, 750 cm).

The Ear Clip is required to attach SenTec TC Sensors to the patient’s earlobe. Suitable for patients with earlobes of sufficient size and mature, intact skin.

Single patient use sensor application ear clip, recommended for adult, pediatric and neonatal patients with mature/intact skin

The Service Gas is required for the calibration of the PCO2-part of SenTec TC Sensors. Depending on usage of the SDMS one Service Gas cylinder lasts for approx. 3 to 4 weeks.

The Contact Gel is required for proper CO2 gas conduction from the patient's skin to the SenTec TC Sensors. Every time a SenTec TC Sensor is to be attached to the measurement site, one drop of Contact Gel must be applied to the center of the Sensor membrane.

The Contact Gel is required for proper CO2 gas conduction from the patient’s skin to the SenTec TC Sensors. Every time a SenTec TC Sensors is to be attached to the measurement site, one drop of Contact Gel must be applied to the center of the Sensor membrane.

The Contact Gel is required for proper CO2 gas conduction from the patient's Skin to the SenTec TC Sensors. Every time a SenTec TC Sensors is to be attached to the measurement site, one drop of Contact Gel must be applied to the center of the Sensor Membrane. GEL-SD is delivered in single dose vials each containing 0.3 g of the solution and is intended for single use.

MAR-MI is intended to attach SenTec TC Sensors to various measurement sites for patients with mature, intact skin.

MAR-SF is intended to attach SenTec TC Sensors to various measurement sites for patients with sensitive, fragile but intact skin.

Single use sensor application ring, recommended for adult, pediatric and neonatal patients with mature/intact skin

Single use sensor application ring, recommended for adult, pediatric and neonatal patients with sensitive/fragile skin

The membrane and the electrolyte of SenTec TC Sensors must be changed periodically. For this purpose the old sensor membrane must be removed, the sensor surface must be cleaned, new electrolyte must be applied and a new sensor membrane must be put on. The patented Membrane Changer (MC) is a tool that allows the user to carry out the whole membrane change process by 4 simple press-and-turn steps. The MC is single-use.

The Membrane Changer (MC-R) is a reloadable tool to change the membrane of SenTec TC Sensors. Prior reuse, the Membrane Changer (MC-R) must be reloaded with a new Membrane Changer Insert (MC-I). The MC-I is single-use

The membrane and the electrolyte of SenTec TC Sensors must be changed periodically. For this purpose the old sensor membrane must be removed, the sensor surface must be cleaned, new electrolyte must be applied and a new sensor membrane must be put on. The patented Membrane Changer (MC-R) is a tool that allows the user to carry out the whole membrane change process by 4 simple press-and-turn steps. To enable an economic and cost saving membrane change, the Membrane Changer after use can be reloaded with a new Membrane Changer Insert (MC-I).

The membrane and the electrolyte of SenTec TC Sensors must be changed periodically. For this purpose the old sensor membrane must be removed, the sensor surface must be cleaned, new electrolyte must be applied and a new sensor membrane must be put on. The patented Membrane Changer (MC-R) is a tool that allows the user to carry out the whole membrane change process by 4 simple press-and-turn steps. To enable an economic and cost saving membrane change, the Membrane Changer after use can be reloaded with a new Membrane Changer Insert (MC-I). The memrane changer set contains the MC-R and inserts (MC-I) to reload.Membrane Changer Set [1 membrane changer, 1 insert]

Digital Sensor for non-invasive and continuous measurement of transcutaneous carbon dioxide and oxygen partial pressure as well as pulse oximetry. Suitable for adult, pediatric and neonatal patients.

A combination of single-use products intended to attach the Sentec sensors to the earlobe of the patient, recommended for patients with mature/intact skin.

A combination of single-use products intended to attach the Sentec sensors to conventional measurement sites, recommended for adult, pediatric and neonatal patients with mature/intact skin

A combination of single-use products intended to attach the Sentec Sensors to conventional measurement sites, recommended for adult, pediatric and neonatal patients with sensitive/fragile skin.

The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)

The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)

The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)

The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)

The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)

The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)

The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)

The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)

The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)

The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)

The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG).

The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG).

The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)

The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)

The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)

Isolates the SDM from mains for use in home use environments.

The Staysite Adhesive (SA-MAR), is an optional, single-use adhesive which is indicated for use with Multi-Site Attachment Rings, models MAR-MI and MAR-SF if more secure attachment is required.

Stand alone monitor with colour display for continuous non-invasive vital parameter monitoring, with integrated docking station for sensor storage and calibration.

This cover will protect the SenTec Digital Monitor (SDM) from dripping water when the device is tilted up to 15° (IPX2).

Stand alone monitor with colour display for continuous non-invasive vital parameter monitoring, with integrated docking station for sensor storage and calibration.

Standard Starter Set contains:Ear Clips (EC-MI)Multi-Site Attachment Rings for mature/intact skin (MAR-MI)Multi-Site Attachment Rings for sensitive/fragile skin (MAR-SF)Membrane Changer tool (reloadable) (MC-R)Contact Gel (GEL-04)Service Gas (GAS-0812)

Standard Starter Set (without Service Gas) contains:Ear Clips (EC-MI)Multi-Site Attachment Rings for mature/intact skin (MAR-MI)Multi-Site Attachment Rings for sensitive/fragile skin (MAR-SF)Membrane Changer tool (reloadable) (MC-R)Contact Gel (GEL-04)

Neonatal Starter Set contains:Multi-Site Attachment Rings for mature/intact skin (MAR-MI)Multi-Site Attachment Rings for sensitive/fragile skin (MAR-SF)Membrane Changer tool (reloadable) (MC-R)Contact Gel (GEL-04)Service Gas (GAS-0812)

Neonatal Starter Set (without Service Gas) contains:Multi-Site Attachment Rings for mature/intact skin (MAR-MI)Multi-Site Attachment Rings for sensitive/fragile skin (MAR-SF)Membrane Changer tool (reloadable) (MC-R)Contact Gel (GEL-04)Service Gas (GAS-0812)

PC based software required a) to configure special (safety-relevant) settings of the SenTec Digital Monitor (SDM), b) to manage ‘SDM Parameters Settings’ and c) to download trend data from the internal memory of the SDM to a PC. It includes features to analyze and view the downloaded trend data. The V-STATS™ software includes the V-CareNeT™ Package, which enables remote monitoring and alarm surveillance for multiple SDMs being connected to the same network as the PC with V-STATS™.

Digital Sensor for non-invasive and continuous measurement of transcutaneous carbon dioxide partial pressure and pulse oximetry. Suitable for adult, pediatric and neonatal patients.