The Starling Monitor provides continuous non-invasive monitoring of Cardiac Output and other key hemodynamic parameters of cardiac function, as well as blood pressure parameters and blood oxygen saturation levels.

The Nonagon N9 device is a home use device. The device is comprised of a handheld unit that connects with a smartphone and a dedicated smartphone software application that runs on the user's personal smartphone An API is defined to enable healthcare providers to communicate with the device. The Device enables user’s examination at home with or without the guidance of a remote physician. It also enables guidance and data examination by a remote physician over an IP network. The Smartphone Application controls the Handheld Unit's functionality and processes and displays the collected data. The N9 device measure, record, and transmit data of auscultation sound of human body (lung, hear, abdomen), temperature, oxygen saturation (SpO2) and pulse rate, and can be used to send images of an examined body part. In addition, the device includes otoscope where images of the ear can be transmitted to the healthcare provider.

Fingertip Pulse Oximeter is a portable non-invasive, spot-check, oxygen saturation of arterial hemoglobin (SpO2) and pulse rate of adult and pediatric patient at home, and hospital (including clinical use and in internist/surgery, Anesthesia, intensive care and etc.). Not for continuously monitoring.

The Diagnostic Station DS20 is a 3-lead ECG device that is intended for use in the recording, analysis and evaluation of ECG waveforms. The DS20 is also intended for the collection and recording of basic vital signs on adult and pediatric patients, excluding neonates.

The Diagnostic Station DS20 is a 12-lead ECG device that is intended for use in the recording, analysis and evaluation of ECG waveforms. The DS20 is also intended for the collection and recording of basic vital signs on adult and pediatric patients, excluding neonates.

The Diagnostic Station DS20 is a 3-lead ECG device that is intended for use in the recording, analysis and evaluation of ECG waveforms. The DS20 is also intended for the collection and recording of basic vital signs on adult and pediatric patients, excluding neonates.

The Diagnostic Station DS20 is a 12-lead ECG device that is intended for use in the recording, analysis and evaluation of ECG waveforms. The DS20 is also intended for the collection and recording of basic vital signs on adult and pediatric patients, excluding neonates.

Adapter cable to connect SenTec TC Sensors to the SenTec Digital Monitor. The adapter cable is available in different lengths (XXX=150 cm, 250 cm, 750 cm).

Adapter cable to connect SenTec TC Sensors to the SenTec Digital Monitor. The adapter cable is available in different lengths (XXX=150 cm, 250 cm, 750 cm).

Adapter cable to connect SenTec TC Sensors to the SenTec Digital Monitor. The adapter cable is available in different lengths (XXX=150 cm, 250 cm, 750 cm).

The Ear Clip is required to attach SenTec TC Sensors to the patient’s earlobe. Suitable for patients with earlobes of sufficient size and mature, intact skin.

The Service Gas is required for the calibration of the PCO2-part of SenTec TC Sensors. Depending on usage of the SDMS one Service Gas cylinder lasts for approx. 3 to 4 weeks.

The Contact Gel is required for proper CO2 gas conduction from the patient’s skin to the SenTec TC Sensors. Every time a SenTec TC Sensors is to be attached to the measurement site, one drop of Contact Gel must be applied to the center of the Sensor membrane.

MAR-MI is intended to attach SenTec TC Sensors to various measurement sites for patients with mature, intact skin.

MAR-SF is intended to attach SenTec TC Sensors to various measurement sites for patients with sensitive, fragile but intact skin.

The membrane and the electrolyte of SenTec TC Sensors must be changed periodically. For this purpose the old sensor membrane must be removed, the sensor surface must be cleaned, new electrolyte must be applied and a new sensor membrane must be put on. The patented Membrane Changer (MC-R) is a tool that allows the user to carry out the whole membrane change process by 4 simple press-and-turn steps. To enable an economic and cost saving membrane change, the Membrane Changer after use can be reloaded with a new Membrane Changer Insert (MC-I).

The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)

Stand alone monitor with colour display for continuous non-invasive vital parameter monitoring, with integrated docking station for sensor storage and calibration.

Standard Starter Set contains:Ear Clips (EC-MI)Multi-Site Attachment Rings for mature/intact skin (MAR-MI)Multi-Site Attachment Rings for sensitive/fragile skin (MAR-SF)Membrane Changer tool (reloadable) (MC-R)Contact Gel (GEL-04)Service Gas (GAS-0812)

Standard Starter Set (without Service Gas) contains:Ear Clips (EC-MI)Multi-Site Attachment Rings for mature/intact skin (MAR-MI)Multi-Site Attachment Rings for sensitive/fragile skin (MAR-SF)Membrane Changer tool (reloadable) (MC-R)Contact Gel (GEL-04)

Neonatal Starter Set contains:Multi-Site Attachment Rings for mature/intact skin (MAR-MI)Multi-Site Attachment Rings for sensitive/fragile skin (MAR-SF)Membrane Changer tool (reloadable) (MC-R)Contact Gel (GEL-04)Service Gas (GAS-0812)

Neonatal Starter Set (without Service Gas) contains:Multi-Site Attachment Rings for mature/intact skin (MAR-MI)Multi-Site Attachment Rings for sensitive/fragile skin (MAR-SF)Membrane Changer tool (reloadable) (MC-R)Contact Gel (GEL-04)Service Gas (GAS-0812)

Disposable SpO2 Sensor

Disposable SpO2 Sensor

Disposable SpO2 Sensor

Disposable SpO2 Sensor

Disposable SpO2 Sensor

Disposable SpO2 Sensor

Disposable SpO2 Sensor