AcQMap® Auxiliary Catheter Cable

AcQMap® Ablation Interface Unit Cable

AcQMap® Patient Interface Unit Cable

AcQMap® Patient Interface Unit

AcQMap® Ablation Interface Unit

AcQMap® Workstation

Workstation Cable

AcQMap® Console

POAG Cable MC-POAG-EC6/2

AcQMap® Surface ECG Cable

AcQMap ECG Input Cable

AcQMap Auxiliary Interface Box

AcQMap ECG Output Cable

North America Power Cord

Ampere® Adapter CableAcQMap® → Ablation Catheter

Ampere® Adapter Cable AcQMap®→ Ampere

AcQMap Console

AcQMap Ablation Reference Cable

AcQMap Ablation Electrogram Cable

AcQMap Workstation

AcQMap ECG w/Snaps Cable

AcQMap 2mm Pin Jumper St

AcQMap ECG POST Cable

Cable, AcQMap Surface ECG Output (AHA) Packaged

Power Cord, Console 2.0

AcQMap Auxiliary Interface Box, Console 2.0

AcQMap to SmartAblate Generator Adapter

AcQMap to Maestro Generator Adapter

Carto Force Adapter Cable Shipping Assembly

AcQMap to DiamondTemp Generator Adapter

Adapter Cable-Short, Ablation Adapter to AcQMap

Adapter Cable-Long, Ablation Adapter to AcQMap

Maestro Adapter Cable, AcQMap to Generator

Maestro Adapter Cable, AcQMap to Catheter

AcQMap to DiamondTemp Generator Adapter Cable

PURE EP™ is a system consists of two main parts: the amplifier (aka MSU - Main System Unit),and the personal computer (PC), which are connected over a highspeedfiber optic cable. The patient is connected to the amplifier viaa set of supplied ECG cables and commercially availableintracardiac (IC) catheters. The amplifier includes hardware andembedded software necessary for acquiring ECG and IC signalsfrom patients. The device is not intended for active patientmonitoring. It consists of one ECG and seven IC modules designedto acquire 12-lead ECG and 56 IC signals and send the digitizeddata to the PC. The PC has preinstalled PURE-EP software and isconnected to display monitors. The pre-installed software providesvisualization of received data from the amplifier on real-time andreview screens. It also includes a signal processing module thatprovides various filter options for real-time and review screens.

The Catheter Input Module - IC1 J-Box Unipolar/Bipolar Cable Assembly (3m) is an accessory to the PURE EP™ System. The catheter input modules are used for connecting the IC catheters to the amplifier (aka MSU - Main System Unit).The PURE EP™ is a system that consists of two main parts: the amplifier (aka MSU - Main System Unit),and the personal computer (PC), which are connected over a highspeedfiber optic cable. The patient is connected to the amplifier viaa set of supplied ECG cables and commercially availableintracardiac (IC) catheters. The amplifier includes hardware andembedded software necessary for acquiring ECG and IC signalsfrom patients. The device is not intended for active patientmonitoring. It consists of one ECG and seven IC modules designedto acquire 12-lead ECG and 56 IC signals and send the digitizeddata to the PC. The PC has preinstalled PURE-EP software and isconnected to display monitors. The pre-installed software providesvisualization of received data from the amplifier on real-time andreview screens. It also includes a signal processing module thatprovides various filter options for real-time and review screens.

The Catheter Input Module - IC2 J-Box Bipolar Cable Assembly (3m) is an accessory to the PURE EP™ System. The catheter input modules are used for connecting the IC catheters to the amplifier (aka MSU - Main System Unit).The PURE EP™ is a system that consists of two main parts: the amplifier (aka MSU - Main System Unit),and the personal computer (PC), which are connected over a highspeedfiber optic cable. The patient is connected to the amplifier viaa set of supplied ECG cables and commercially availableintracardiac (IC) catheters. The amplifier includes hardware andembedded software necessary for acquiring ECG and IC signalsfrom patients. The device is not intended for active patientmonitoring. It consists of one ECG and seven IC modules designedto acquire 12-lead ECG and 56 IC signals and send the digitizeddata to the PC. The PC has preinstalled PURE-EP software and isconnected to display monitors. The pre-installed software providesvisualization of received data from the amplifier on real-time andreview screens. It also includes a signal processing module thatprovides various filter options for real-time and review screens.

The ECG Cable is an accessory to the PURE EP™ System. The ECG cable Assembly (4.8m) connects to standard ECG patches on the patient’s skin. The cable connects directly to the blue plug on the amplifier (aka MSU - Main System Unit).The PURE EP™ is a system that consists of two main parts: the amplifier (aka MSU - Main System Unit),and the personal computer (PC), which are connected over a highspeedfiber optic cable. The patient is connected to the amplifier viaa set of supplied ECG cables and commercially availableintracardiac (IC) catheters. The amplifier includes hardware andembedded software necessary for acquiring ECG and IC signalsfrom patients. The device is not intended for active patientmonitoring. It consists of one ECG and seven IC modules designedto acquire 12-lead ECG and 56 IC signals and send the digitizeddata to the PC. The PC has preinstalled PURE-EP software and isconnected to display monitors. The pre-installed software providesvisualization of received data from the amplifier on real-time andreview screens. It also includes a signal processing module thatprovides various filter options for real-time and review screens.

5 cables in one bag with single jumper cables red to split ECG signals between two ECG devices is an accessory to the PURE EP SystemThe PURE EP™ is a system that consists of two main parts: the amplifier (aka MSU - Main System Unit),and the personal computer (PC), which are connected over a highspeedfiber optic cable. The patient is connected to the amplifier viaa set of supplied ECG cables and commercially availableintracardiac (IC) catheters. The amplifier includes hardware andembedded software necessary for acquiring ECG and IC signalsfrom patients. The device is not intended for active patientmonitoring. It consists of one ECG and seven IC modules designedto acquire 12-lead ECG and 56 IC signals and send the digitizeddata to the PC. The PC has preinstalled PURE-EP software and isconnected to display monitors. The pre-installed software providesvisualization of received data from the amplifier on real-time andreview screens. It also includes a signal processing module thatprovides various filter options for real-time and review screens.

5 cables in one bag with single jumper cables black to split ECG signals between two ECG devices is an accessory to the PURE EP System.The PURE EP™ is a system that consists of two main parts: the amplifier (aka MSU - Main System Unit),and the personal computer (PC), which are connected over a highspeedfiber optic cable. The patient is connected to the amplifier viaa set of supplied ECG cables and commercially availableintracardiac (IC) catheters. The amplifier includes hardware andembedded software necessary for acquiring ECG and IC signalsfrom patients. The device is not intended for active patientmonitoring. It consists of one ECG and seven IC modules designedto acquire 12-lead ECG and 56 IC signals and send the digitizeddata to the PC. The PC has preinstalled PURE-EP software and isconnected to display monitors. The pre-installed software providesvisualization of received data from the amplifier on real-time andreview screens. It also includes a signal processing module thatprovides various filter options for real-time and review screens.

5 cables in one bag with 4 pin yoked jumper cables yellow to split ECG signals between two ECG devices is an accessory to the PURE EP System.The PURE EP™ is a system that consists of two main parts: the amplifier (aka MSU - Main System Unit),and the personal computer (PC), which are connected over a highspeedfiber optic cable. The patient is connected to the amplifier viaa set of supplied ECG cables and commercially availableintracardiac (IC) catheters. The amplifier includes hardware andembedded software necessary for acquiring ECG and IC signalsfrom patients. The device is not intended for active patientmonitoring. It consists of one ECG and seven IC modules designedto acquire 12-lead ECG and 56 IC signals and send the digitizeddata to the PC. The PC has preinstalled PURE-EP software and isconnected to display monitors. The pre-installed software providesvisualization of received data from the amplifier on real-time andreview screens. It also includes a signal processing module thatprovides various filter options for real-time and review screens.

5 cables in one bag with 4 pin yoked jumper cables red to split ECG signals between two ECG devices is an accessory to the PURE EP System.The PURE EP™ is a system that consists of two main parts: the amplifier (aka MSU - Main System Unit),and the personal computer (PC), which are connected over a highspeedfiber optic cable. The patient is connected to the amplifier viaa set of supplied ECG cables and commercially availableintracardiac (IC) catheters. The amplifier includes hardware andembedded software necessary for acquiring ECG and IC signalsfrom patients. The device is not intended for active patientmonitoring. It consists of one ECG and seven IC modules designedto acquire 12-lead ECG and 56 IC signals and send the digitizeddata to the PC. The PC has preinstalled PURE-EP software and isconnected to display monitors. The pre-installed software providesvisualization of received data from the amplifier on real-time andreview screens. It also includes a signal processing module thatprovides various filter options for real-time and review screens.

5 cables in one bag with single jumper cables black to split ECG signals between two ECG devices is an accessory to the PURE EP System.The PURE EP™ is a system that consists of two main parts: the amplifier (aka MSU - Main System Unit),and the personal computer (PC), which are connected over a highspeedfiber optic cable. The patient is connected to the amplifier viaa set of supplied ECG cables and commercially availableintracardiac (IC) catheters. The amplifier includes hardware andembedded software necessary for acquiring ECG and IC signalsfrom patients. The device is not intended for active patientmonitoring. It consists of one ECG and seven IC modules designedto acquire 12-lead ECG and 56 IC signals and send the digitizeddata to the PC. The PC has preinstalled PURE-EP software and isconnected to display monitors. The pre-installed software providesvisualization of received data from the amplifier on real-time andreview screens. It also includes a signal processing module thatprovides various filter options for real-time and review screens.

5 cables in one bag with 10 pin yoked jumper cables green to split ECG signals between two ECG devices is an accessory to the PURE EP System.The PURE EP™ is a system that consists of two main parts: the amplifier (aka MSU - Main System Unit),and the personal computer (PC), which are connected over a highspeedfiber optic cable. The patient is connected to the amplifier viaa set of supplied ECG cables and commercially availableintracardiac (IC) catheters. The amplifier includes hardware andembedded software necessary for acquiring ECG and IC signalsfrom patients. The device is not intended for active patientmonitoring. It consists of one ECG and seven IC modules designedto acquire 12-lead ECG and 56 IC signals and send the digitizeddata to the PC. The PC has preinstalled PURE-EP software and isconnected to display monitors. The pre-installed software providesvisualization of received data from the amplifier on real-time andreview screens. It also includes a signal processing module thatprovides various filter options for real-time and review screens.

5 cables in one bag with 10 pin yoked jumper cables yellow to split ECG signals between two ECG devices is an accessory to the PURE EP System.The PURE EP™ is a system that consists of two main parts: the amplifier (aka MSU - Main System Unit),and the personal computer (PC), which are connected over a highspeedfiber optic cable. The patient is connected to the amplifier viaa set of supplied ECG cables and commercially availableintracardiac (IC) catheters. The amplifier includes hardware andembedded software necessary for acquiring ECG and IC signalsfrom patients. The device is not intended for active patientmonitoring. It consists of one ECG and seven IC modules designedto acquire 12-lead ECG and 56 IC signals and send the digitizeddata to the PC. The PC has preinstalled PURE-EP software and isconnected to display monitors. The pre-installed software providesvisualization of received data from the amplifier on real-time andreview screens. It also includes a signal processing module thatprovides various filter options for real-time and review screens.

5 cables in one bag with 10 pin yoked jumper cables blue to split ECG signals between two ECG devices is an accessory to the PURE EP SystemThe PURE EP™ is a system that consists of two main parts: the amplifier (aka MSU - Main System Unit),and the personal computer (PC), which are connected over a highspeedfiber optic cable. The patient is connected to the amplifier viaa set of supplied ECG cables and commercially availableintracardiac (IC) catheters. The amplifier includes hardware andembedded software necessary for acquiring ECG and IC signalsfrom patients. The device is not intended for active patientmonitoring. It consists of one ECG and seven IC modules designedto acquire 12-lead ECG and 56 IC signals and send the digitizeddata to the PC. The PC has preinstalled PURE-EP software and isconnected to display monitors. The pre-installed software providesvisualization of received data from the amplifier on real-time andreview screens. It also includes a signal processing module thatprovides various filter options for real-time and review screens.

The Dual ECG Splitter Box is an accessory to the PURE EP™ System. It allows splitting a single array of input ECG signals into two output signals to use in conjunction with the PURE EP™ system.The PURE EP™ is a system that consists of two main parts: the amplifier (aka MSU - Main System Unit),and the personal computer (PC), which are connected over a highspeedfiber optic cable. The patient is connected to the amplifier viaa set of supplied ECG cables and commercially availableintracardiac (IC) catheters. The amplifier includes hardware andembedded software necessary for acquiring ECG and IC signalsfrom patients. The device is not intended for active patientmonitoring. It consists of one ECG and seven IC modules designedto acquire 12-lead ECG and 56 IC signals and send the digitizeddata to the PC. The PC has preinstalled PURE-EP software and isconnected to display monitors. The pre-installed software providesvisualization of received data from the amplifier on real-time andreview screens. It also includes a signal processing module thatprovides various filter options for real-time and review screens.

License dongle for second workstation using the HolterCare software.

The ScottCare HolterCare Analysis System is intended for general hospital or clinical use bymedical professionals whenever it is required to assess a patient’s long-term, continuous,ambulatory electrocardiogram (ECG). The long-term ECG is recorded on a digital flash memoryHolter recorder. This product allows a trained physician, or other health care professional, todownload and analyze the data from the recorder, review it, and produce printed reports. This willenable: The evaluation of arrhythmias and ischemic attacks. The reporting of PQRST intervals. Clinical and epidemiological research studies. The evaluation of a patient’s response after resuming occupational or recreational activities (e.g.,after M.I. or cardiac surgery). The evaluation of patients with Pacemakers.The need to record, review, edit, and archive the ambulatory ECG is most commonly encountered inthe Cardiology areas of the hospital, or physician’s office, during cardiac assessment of a patient.This device is available for sale to, or on the order of, a licensed physician only and is not intendedfor any home-use applications.