ELM HP PTA 10mm x 40mm x 75cm

ELM HP PTA 12mm x 40mm x 75cm

ELM HP PTA 6mm x 100mm x 75cm

ELM HP PTA 6mm x 40mm x 75cm

ELM HP PTA 6mm x 60mm x 75cm

ELM HP PTA 7mm x 100mm x 75cm

ELM HP PTA 7mm x 20mm x 75cm

ELM HP PTA 7mm x 40mm x 75cm

ELM HP PTA 7mm x 60mm x 75cm

ELM HP PTA 8mm x 20mm x 75cm

ELM HP PTA 8mm x 40mm x 75cm

ELM HP PTA 8mm x 60mm x 75cm

ELM HP PTA 8mm x 80mm x 75cm

ELM HP PTA 9mm x 40mm x 75cm

The Surmodics Microcatheter is a sterile, single use, percutaneous device intended to provide support to facilitate the placementof guidewires in the coronary and peripheral vasculature. Additionally, the microcatheter can be used for contrast media injection.The catheter is a single-lumen microcatheter with a 1.9 Fr distal outer diameter, a 2.6 Fr proximal outer diameter and iscompatible with a 0.014” guidewire. The proximal end of the catheter shaft has a larger inner diameter, outer diameter and wallthickness and tapers to the distal end. The catheter is available in lengths of 135 cm and 150 cm in length to facilitate access tovarious target sites.

The Surmodics Microcatheter is a sterile, single use, percutaneous device intended to provide support to facilitate the placement of guidewires in the coronary and peripheral vasculature. Additionally, the microcatheter can be used for contrast media injection. The catheter is a single-lumen microcatheter with a 1.9 Fr distal outer diameter, a 2.6 Fr proximal outer diameter and is compatible with a 0.014” guidewire. The proximal end of the catheter shaft has a larger inner diameter, outer diameter and wall thickness and tapers to the distal end. The catheter is available in lengths of 135 cm and 150 cm in length to facilitate access to various target sites.

The Surmodics Microcatheter is a sterile, single use, percutaneous device intended to provide support to facilitate the placement of guidewires in the coronary and peripheral vasculature. Additionally, the microcatheter can be used for contrast media injection. The catheter is a single-lumen microcatheter with a 1.9 Fr distal outer diameter, a 2.6 Fr proximal outer diameter and is compatible with a 0.014” guidewire. The proximal end of the catheter shaft has a larger inner diameter, outer diameter and wall thickness and tapers to the distal end. The catheter is available in lengths of 135 cm and 150 cm in length to facilitate access to various target sites.

The Boss Crossing Support Catheter (Boss CSC) is intended to guide and support a guidewire during access of the peripheral vasculature, allow for wire exchanges and provide a conduit for the delivery of saline or other diagnostic contrast agents. The device is intended for single use and is provided sterile using Ethylene Oxide gas. The device consists of two low profile catheters, 2.4F and 3.9F, which are compatible with 0.018” and 0.035” guidewires, respectively. The proximal end of each catheter includes a standard catheter hub with Luer fitting and a strain relief. The distal end of both catheters are equipped with a single marker band which enables visibility under fluoroscopy. There is a hydrophilic coating on the distal portion of each catheter shaft to enhance lubricity. The device is provided either as a kit containing one of each size catheter, or as a single pack containing only one catheter. Each catheter is packaged in individual spiral HDPE hoops that are secured to a HDPE card and placed inside a Tyvek Mylar pouch. This model is a 2.4F/90cm length catheter packaged individually

The Boss Crossing Support Catheter (Boss CSC) is intended to guide and support a guidewire during access of the peripheral vasculature, allow for wire exchanges and provide a conduit for the delivery of saline or other diagnostic contrast agents. The device is intended for single use and is provided sterile using Ethylene Oxide gas. The device consists of two low profile catheters, 2.4F and 3.9F, which are compatible with 0.018” and 0.035” guidewires, respectively. The proximal end of each catheter includes a standard catheter hub with Luer fitting and a strain relief. The distal end of both catheters are equipped with a single marker band which enables visibility under fluoroscopy. There is a hydrophilic coating on the distal portion of each catheter shaft to enhance lubricity. The device is provided either as a kit containing one of each size catheter, or as a single pack containing only one catheter. Each catheter is packaged in individual spiral HDPE hoops that are secured to a HDPE card and placed inside a Tyvek Mylar pouch. This model is a 2.4F/135cm length catheter packaged individually.

The Boss Crossing Support Catheter (Boss CSC) is intended to guide and support a guidewire during access of the peripheral vasculature, allow for wire exchanges and provide a conduit for the delivery of saline or other diagnostic contrast agents. The device is intended for single use and is provided sterile using Ethylene Oxide gas. The device consists of two low profile catheters, 2.4F and 3.9F, which are compatible with 0.018” and 0.035” guidewires, respectively. The proximal end of each catheter includes a standard catheter hub with Luer fitting and a strain relief. The distal end of both catheters are equipped with a single marker band which enables visibility under fluoroscopy. There is a hydrophilic coating on the distal portion of each catheter shaft to enhance lubricity. The device is provided either as a kit containing one of each size catheter, or as a single pack containing only one catheter. Each catheter is packaged in individual spiral HDPE hoops that are secured to a HDPE card and placed inside a Tyvek Mylar pouch. This model is a 2.4F/150cm length catheter packaged individually

The Boss Crossing Support Catheter (Boss CSC) is intended to guide and support a guidewire during access of the peripheral vasculature, allow for wire exchanges and provide a conduit for the delivery of saline or other diagnostic contrast agents. The device is intended for single use and is provided sterile using Ethylene Oxide gas. The device consists of two low profile catheters, 2.4F and 3.9F, which are compatible with 0.018” and 0.035” guidewires, respectively. The proximal end of each catheter includes a standard catheter hub with Luer fitting and a strain relief. The distal end of both catheters are equipped with a single marker band which enables visibility under fluoroscopy. There is a hydrophilic coating on the distal portion of each catheter shaft to enhance lubricity. The device is provided either as a kit containing one of each size catheter, or as a single pack containing only one catheter. Each catheter is packaged in individual spiral HDPE hoops that are secured to a HDPE card and placed inside a Tyvek Mylar pouch. This model is a 2.4F/150cm length catheter packaged individually

The Boss Crossing Support Catheter (Boss CSC) is intended to guide and support a guidewire during access of the peripheral vasculature, allow for wire exchanges and provide a conduit for the delivery of saline or other diagnostic contrast agents. The device is intended for single use and is provided sterile using Ethylene Oxide gas. The device consists of two low profile catheters, 2.4F and 3.9F, which are compatible with 0.018” and 0.035” guidewires, respectively. The proximal end of each catheter includes a standard catheter hub with Luer fitting and a strain relief. The distal end of both catheters are equipped with a single marker band which enables visibility under fluoroscopy. There is a hydrophilic coating on the distal portion of each catheter shaft to enhance lubricity. The device is provided either as a kit containing one of each size catheter, or as a single pack containing only one catheter. Each catheter is packaged in individual spiral HDPE hoops that are secured to a HDPE card and placed inside a Tyvek Mylar pouch. This model is 3.9F/90cm length catheter packaged individually

The Boss Crossing Support Catheter (Boss CSC) is intended to guide and support a guidewire during access of the peripheral vasculature, allow for wire exchanges and provide a conduit for the delivery of saline or other diagnostic contrast agents. The device is intended for single use and is provided sterile using Ethylene Oxide gas. The device consists of two low profile catheters, 2.4F and 3.9F, which are compatible with 0.018” and 0.035” guidewires, respectively. The proximal end of each catheter includes a standard catheter hub with Luer fitting and a strain relief. The distal end of both catheters are equipped with a single marker band which enables visibility under fluoroscopy. There is a hydrophilic coating on the distal portion of each catheter shaft to enhance lubricity. The device is provided either as a kit containing one of each size catheter, or as a single pack containing only one catheter. Each catheter is packaged in individual spiral HDPE hoops that are secured to a HDPE card and placed inside a Tyvek Mylar pouch. This model is a 3.9F/90cm length catheter packaged individually

The Boss Crossing Support Catheter (Boss CSC) is intended to guide and support a guidewire during access of the peripheral vasculature, allow for wire exchanges and provide a conduit for the delivery of saline or other diagnostic contrast agents. The device is intended for single use and is provided sterile using Ethylene Oxide gas. The device consists of two low profile catheters, 2.4F and 3.9F, which are compatible with 0.018” and 0.035” guidewires, respectively. The proximal end of each catheter includes a standard catheter hub with Luer fitting and a strain relief. The distal end of both catheters are equipped with a single marker band which enables visibility under fluoroscopy. There is a hydrophilic coating on the distal portion of each catheter shaft to enhance lubricity. The device is provided either as a kit containing one of each size catheter, or as a single pack containing only one catheter. Each catheter is packaged in individual spiral HDPE hoops that are secured to a HDPE card and placed inside a Tyvek Mylar pouch. This model is a 3.9F/90cm length catheter packaged with a 2.4F /150cm length catheter.

The Boss Crossing Support Catheter (Boss CSC) is intended to guide and support a guidewire during access of the peripheral vasculature, allow for wire exchanges and provide a conduit for the delivery of saline or other diagnostic contrast agents. The device is intended for single use and is provided sterile using Ethylene Oxide gas. The device consists of two low profile catheters, 2.4F and 3.9F, which are compatible with 0.018” and 0.035” guidewires, respectively. The proximal end of each catheter includes a standard catheter hub with Luer fitting and a strain relief. The distal end of both catheters are equipped with a single marker band which enables visibility under fluoroscopy. There is a hydrophilic coating on the distal portion of each catheter shaft to enhance lubricity. The device is provided either as a kit containing one of each size catheter, or as a single pack containing only one catheter. Each catheter is packaged in individual spiral HDPE hoops that are secured to a HDPE card and placed inside a Tyvek Mylar pouch. This model is a 3.9F/90cm length catheter packaged with a 2.4F /150cm length catheter.

The Boss Crossing Support Catheter (Boss CSC) is intended to guide and support a guidewire during access of the peripheral vasculature, allow for wire exchanges and provide a conduit for the delivery of saline or other diagnostic contrast agents. The device is intended for single use and is provided sterile using Ethylene Oxide gas. The device consists of two low profile catheters, 2.4F and 3.9F, which are compatible with 0.018” and 0.035” guidewires, respectively. The proximal end of each catheter includes a standard catheter hub with Luer fitting and a strain relief. The distal end of both catheters are equipped with a single marker band which enables visibility under fluoroscopy. There is a hydrophilic coating on the distal portion of each catheter shaft to enhance lubricity. The device is provided either as a kit containing one of each size catheter, or as a single pack containing only one catheter. Each catheter is packaged in individual spiral HDPE hoops that are secured to a HDPE card and placed inside a Tyvek Mylar pouch. This Model is a 3.9F/90cm length catheter packaged with a 2.4F/135cm length catheter