Armada 14 PTA Catheter 2.5 mm x 20 mm x 150 cm / Over-The-Wire

Armada 14 PTA Catheter 2.5 mm x 40 mm x 150 cm / Over-The-Wire

Armada 14 PTA Catheter 2.5 mm x 60 mm x 150 cm / Over-The-Wire

Armada 14 PTA Catheter 2.5 mm x 80 mm x 150 cm / Over-The-Wire

Armada 14 PTA Catheter 2.5 mm x 120 mm x 150 cm / Over-The-Wire

Armada 14 PTA Catheter 2.5 mm x 200 mm x 150 cm / Over-The-Wire

Armada 14 PTA Catheter 3.0 mm x 20 mm x 150 cm / Over-The-Wire

Armada 14 PTA Catheter 3.0 mm x 40 mm x 150 cm / Over-The-Wire

Armada 14 PTA Catheter 3.0 mm x 60 mm x 150 cm / Over-The-Wire

Armada 14 PTA Catheter 3.0 mm x 80 mm x 150 cm / Over-The-Wire

Armada 14 PTA Catheter 3.0 mm x 120 mm x 150 cm / Over-The-Wire

Armada 14 PTA Catheter 3.0 mm x 200 mm x 150 cm / Over-The-Wire

Armada 14 PTA Catheter 4.0 mm x 20 mm x 150 cm / Over-The-Wire

Armada 14 PTA Catheter 4.0 mm x 40 mm x 150 cm / Over-The-Wire

Armada 14 PTA Catheter 4.0 mm x 60 mm x 150 cm / Over-The-Wire

Armada 14 PTA Catheter 4.0 mm x 80 mm x 150 cm / Over-The-Wire

Armada 14 PTA Catheter 4.0 mm x 120 mm x 150 cm / Over-The-Wire

Armada 14 PTA Catheter 4.0 mm x 200 mm x 150 cm / Over-The-Wire

The NHancer™Rx is a dual lumen catheter intended to use in the coronary and/or peripheral vasculature. The NHancer™Rx is a 0.014” Rapid Exchange (Rx) guide wire support catheter. The NHancer™Rx has an over the wire (OTW) lumen that runs the length of the catheter and a rapid exchange (RX) delivery lumen on the distal end. The NHancer™Rx has an effective length of 135 cm and is compatible with 0.014”/0.36mm or smaller guide wires. The NHancer™Rx has two depth markings located at 95 cm and 105 cm from the distal tip. The NHancer™Rx has a radiopaque marker identifying the distal end of the catheter and a second radiopaque marker located 8 mm from the distal tip identifies the distal end of the OTW lumen.To reduce friction in the guide catheter and vasculature, the distal 15 cm of the shaft is fitted with a hydrophilic coating. To reduce friction of the guide wire in the lumen, the entire lumens of the NHancer Rx are coated with MDX (silicone) coating.To ease catheter loading into the hemostasis device and the guiding catheter a removable stylet (9) is placed in the OTW lumen

The ReCross is a dual lumen catheter intended to use in the coronary and/or peripheral vasculature. The ReCross is a 0.014” Over The Wire (OTW) guide wire support catheter. The ReCross has two over the wire OTW lumens that runs the length of the catheter. The ReCross has two depth markings located at 95 cm and 105 cm from the distal tip. The ReCross has a radiopaque marker identifying the distal end of the catheter, a second radiopaque marker in the stylet lumen located 8 mm from the distal tip identifies the distal end of the OTW lumen and a third radiopaque marker in the tip lumen located at 12 mm from the distal tip indentifying the side port.To reduce friction in the guide catheter and vasculature, the distal shaft is fitted with a hydrophilic coating. To reduce friction of the guide wire in the lumen, the entire lumens of the ReCross are coated with MDX (silicone) coating.To ease catheter loading into the hemostasis device and the guiding catheter a removable stylet is placed in the stylet lumen

The TrapIt Trapping Balloon Catheters have an integrated shaft system and a balloon near the distal tip. The shaft has a lumen which is used for inflation of the balloon with contrast medium. As aid in positioning the balloon in a guide catheter a tactile feedback stop is integrated in the shaft. The shaft of the 100 cm compatible TrapIt has a shaft depth marking that aid in gauging balloon catheter position relative to the guiding catheter tip when used in 90 cm guide catheters.

The TrapIt Trapping Balloon Catheters have an integrated shaft system and a balloon near the distal tip. The shaft has a lumen which is used for inflation of the balloon with contrast medium. As aid in positioning the balloon in a guide catheter a tactile feedback stop is integrated in the shaft. The shaft of the 100 cm compatible TrapIt has a shaft depth marking that aid in gauging balloon catheter position relative to the guiding catheter tip when used in 90 cm guide catheters.

CATHETER Z27AL10 Z2 7F 100CM AL10

CATHETER Z27AL10SH Z2 7F 100CM AL10

CATHETER Z27AL15 Z2 7F 100CM AL15

CATHETER Z27AL20SH Z2 7F 100CM AL20

CATHETER Z27AL25 Z2 7F 100CM AL25

CATHETER Z27ALR12 Z2 7F 100CM ALR12

CATHETER Z27ALR12SH Z2 7F 100CM ALR12

CATHETER Z27AR10 Z2 7F 100CM AR10

CATHETER Z27AR10SH Z2 7F 100CM AR10

CATHETER Z27AR20 Z2 7F 100CM AR20

CATHETER Z27AR20SH Z2 7F 100CM AR20

CATHETER Z27EBU30 Z2 7F 100CM EB30

CATHETER Z27EBU35 Z2 7F 100CM EB35

CATHETER Z27EBU35SH Z2 7F 100CM EB35

CATHETER Z27EBU375 Z2 7F 100CM EB375

CATHETER Z27EBU40SH Z2 7F 100CM EB40

CATHETER Z27EBU45 Z2 7F 100CM EB45

CATHETER Z27EBU50 Z2 7F 100CM EB50

CATHETER Z27EBU50SH Z2 7F 100CM EB50

CATHETER Z27FL30 Z2 7F 100CM FL30

CATHETER Z27FL35 Z2 7F 100CM FL35

CATHETER Z27FL35SH Z2 7F 100CM FL35

CATHETER Z27FL40 Z2 7F 100CM FL40

CATHETER Z27FL45 Z2 7F 100CM FL45

CATHETER Z27FL50 Z2 7F 100CM FL50

CATHETER Z27FL50SH Z2 7F 100CM FL50

CATHETER Z27FL60 Z2 7F 100CM FL60

CATHETER Z27FL60SH Z2 7F 100CM FL60