Flow meter

Roller Pump, 115V, System 8000

Cardioplegia Monitor

CDI 500 Comm module for TCVS Sarns 8000

Line Occluder

Lamp Long 33"

The 33" gooseneck, 20 watt lamp is intended to be mounted on any of the system poles

The 15" gooseneck, 20 watt lamp is intended to be mounted on any of the system poles

The flowmeter module provides the interface between the flow sensor and the system. The module processes the signals necessary to compute fluid flow values. Those flow values are then communicated to the system. Flowmeter values are displayed on the CCM and, if assigned, on a pump's local display.

The pressure module serves as the interface between up to two pressure transducers and the system. This module monitors signals from the pressure transducers and communicates pressure values, alerts, and alarms to the system.

The RS-232 Interface Module provides the interface between the RS-232 protocol data acquistion software and the system. The module outputs system data to the data acquisition software such as Tlink Data management Software.

The interface between the temperature sensor and the rest of the system.

The Interface Module for CDI 100 provides the interface between a CDI ™ 100 or CDI™ 100 Saturation/Hematocrit Monitor and the APS1. The module communicates the CDI monitor values to the system for display on the CCM.

The Interface Module for CDI 500 Module provides the interface between the CDI™ 500 Blood Parameter Monitoring System and the APS1. The module communicates the CDI 500 monitor values to the system for display on the CCM.

The occluder module serves as the interface between the occluder head and the system. The occluder system is controlled from the CCM, and can be configured to respond to primary pump events.

Cable used to connect the CDI data module to the intended CDI device.

Cable used to connect the data module to the intended device.

The occluder head provides a computer-controlled tube occlusion mechanism. The occluder head is controlled via signals received from the occluder module. The occulder head can be detached from the occluder module.