RevMed
Home/Specialty/Dental/Implant, Endosseous, Root-Form

Implant, Endosseous, Root-Form

38,231 Results
Results Per Page
  • 50
  • 100
  • 250
Catalog #
Qty
Starting At
Name
Company Name
Description
0
-
Angled Abutment 25° 4.0mm Cuff
STERNGOLD DENTAL LLC
Angled Abutment are available for cases where implants are not able to provide alignments leading to clinical parallelism. Available in 15 and 30 degree angulations, they offer the clinician a wide range of three-dimensional options. Their internal design allows them to be locked into any one of twelve rotational positions. The 15 degree Angled Abutments are designed for use with cemented prostheses, and the 30 degree Angled Abutments for cemented or screw retained prostheses.
0
-
RP Prosthetic Cylinder Titanium, 15.0mm Height
STERNGOLD DENTAL LLC
Prosthetic Cylinders provide precision fit to abutment. Used for Fabrication of Final Restoration. Plastic Cylinders are fabricated to assure clean burnout.
0
-
RP Prosthetic Screw Internal Hex
STERNGOLD DENTAL LLC
For use with Natural Profile and UCLA-Type Abutments.Install with large external hex drivers (.048").
0
-
Natural Profile Healing Abutment
STERNGOLD DENTAL LLC
Devices are used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. Healing Abutments are intended for placement onto the implant during stage II surgery. As the tissue heals, it conforms to the contours of the abutment. As the gingiva heals, the tissue adapts to the form of the healing abutment, creating permanent oral access to the implant and prepares the gingiva for restoration.
0
-
Natural Profile Healing Abutment 7.0mm x 3.0mm, RP, Ti
STERNGOLD DENTAL LLC
Devices are used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. Healing Abutments are intended for placement onto the implant during stage II surgery. As the tissue heals, it conforms to the contours of the abutment. As the gingiva heals, the tissue adapts to the form of the healing abutment, creating permanent oral access to the implant and prepares the gingiva for restoration.
0
-
Natural Profile Healing Abutment 7.0mm x 2.0mm, RP, Ti
STERNGOLD DENTAL LLC
Devices are used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. Healing Abutments are intended for placement onto the implant during stage II surgery. As the tissue heals, it conforms to the contours of the abutment. As the gingiva heals, the tissue adapts to the form of the healing abutment, creating permanent oral access to the implant and prepares the gingiva for restoration.
0
-
Natural Profile Healing Abutment 7.0mm x 1.0mm, RP, Ti
STERNGOLD DENTAL LLC
Devices are used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. Healing Abutments are intended for placement onto the implant during stage II surgery. As the tissue heals, it conforms to the contours of the abutment. As the gingiva heals, the tissue adapts to the form of the healing abutment, creating permanent oral access to the implant and prepares the gingiva for restoration.
0
-
Natural Profile Healing Abutment 6.0mm x 4.0mm, RP, Ti
STERNGOLD DENTAL LLC
Devices are used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. Healing Abutments are intended for placement onto the implant during stage II surgery. As the tissue heals, it conforms to the contours of the abutment. As the gingiva heals, the tissue adapts to the form of the healing abutment, creating permanent oral access to the implant and prepares the gingiva for restoration.
0
-
Natural Profile Healing Abutment 6.0mm x 3.0mm, RP, Ti
STERNGOLD DENTAL LLC
Devices are used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. Healing Abutments are intended for placement onto the implant during stage II surgery. As the tissue heals, it conforms to the contours of the abutment. As the gingiva heals, the tissue adapts to the form of the healing abutment, creating permanent oral access to the implant and prepares the gingiva for restoration.
0
-
Natural Profile Healing Abutment 6.0mm x 2.0mm, RP, Ti
STERNGOLD DENTAL LLC
Devices are used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. Healing Abutments are intended for placement onto the implant during stage II surgery. As the tissue heals, it conforms to the contours of the abutment. As the gingiva heals, the tissue adapts to the form of the healing abutment, creating permanent oral access to the implant and prepares the gingiva for restoration.
0
-
Natural Profile Healing Abutment 6.0mm x 1.0mm, RP, Ti
STERNGOLD DENTAL LLC
Devices are used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. Healing Abutments are intended for placement onto the implant during stage II surgery. As the tissue heals, it conforms to the contours of the abutment. As the gingiva heals, the tissue adapts to the form of the healing abutment, creating permanent oral access to the implant and prepares the gingiva for restoration.
0
-
Natural Profile Healing Abutment 5.0mm x 4.0mm, RP, Ti
STERNGOLD DENTAL LLC
Devices are used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. Healing Abutments are intended for placement onto the implant during stage II surgery. As the tissue heals, it conforms to the contours of the abutment. As the gingiva heals, the tissue adapts to the form of the healing abutment, creating permanent oral access to the implant and prepares the gingiva for restoration.
0
-
Natural Profile Healing Abutment 5.0mm x 3.0mm, RP, Ti
STERNGOLD DENTAL LLC
Devices are used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. Healing Abutments are intended for placement onto the implant during stage II surgery. As the tissue heals, it conforms to the contours of the abutment. As the gingiva heals, the tissue adapts to the form of the healing abutment, creating permanent oral access to the implant and prepares the gingiva for restoration.
0
-
Natural Profile Healing Abutment
STERNGOLD DENTAL LLC
Devices are used in dental implant applications for oral rehabilitation of edentulous and partially denture less patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. Healing Abutments are intended for placement onto the implant during stage II surgery. As the tissue heals, it conforms to the contours of the abutment. As the gingiva heals, the tissue adapts to the form of the healing abutment, creating permanent oral access to the implant and prepares the gingiva for restoration.
0
-
Natural Profile Healing Abutment 5.0mm x 1.0mm, RP, Ti
STERNGOLD DENTAL LLC
Devices are used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. Healing Abutments are intended for placement onto the implant during stage II surgery. As the tissue heals, it conforms to the contours of the abutment. As the gingiva heals, the tissue adapts to the form of the healing abutment, creating permanent oral access to the implant and prepares the gingiva for restoration.
0
-
RP Prosthetic Screw Noble Alloy, High Torque
STERNGOLD DENTAL LLC
For use with Natural Profile and UCLA-Type Abutments.Install with large external hex drivers (.048").
0
-
RP Angled Abutment Screw, Hexed
STERNGOLD DENTAL LLC
Angled abutments are available for cases where implants are not able to provide alignments leading to clinical parallelism. 15° Angled Abutments in two cuff heights for pre-angulation. Angled abutments are designed to be used with cemented prostheses. They offer the clinician a wide range of three-dimensional options.
0
-
RP Prosthetic Screw Titanium
STERNGOLD DENTAL LLC
For use with Natural Profile and UCLA-Type Abutments.Install with large external hex drivers (.048").
0
-
RP Plastic Prosthetic Cylinder 4.0mm height
STERNGOLD DENTAL LLC
Gold Cylinder (64% Gold, 22% Palladium) provides precision fit to abutment. Melting Range 1320°C-1370°C (2400°F-2500°F). Used for Fabrication of Final Restoration. Plastic Cylinders are fabricated to assure clean burnout.
0
-
RP Plastic Prosthetic Cylinder 3.0mm height
STERNGOLD DENTAL LLC
Gold Cylinder (64% Gold, 22% Palladium) provides precision fit to abutment. Melting Range 1320°C-1370°C (2400°F-2500°F). Used for Fabrication of Final Restoration. Plastic Cylinders are fabricated to assure clean burnout.
0
-
RP Gold Prosthetic Cylinder 4.0mm height
STERNGOLD DENTAL LLC
Gold Cylinder (64% Gold, 22% Palladium) provides precision fit to abutment. Melting Range 1320°C-1370°C (2400°F-2500°F). Used for Fabrication of Final Restoration. Plastic Cylinders are fabricated to assure clean burnout.
0
-
RP Gold Prosthetic Cylinder 3.0mm height
STERNGOLD DENTAL LLC
Gold Cylinder (64% Gold, 22% Palladium) provides precision fit to abutment. Melting Range 1320°C-1370°C (2400°F-2500°F). Used for Fabrication of Final Restoration. Plastic Cylinders are fabricated to assure clean burnout.
0
-
Stern AC Implant 5.0 x 10mm, Ti
STERNGOLD DENTAL LLC
The Stern AC Implant is a self-tapping, double thread screw implant, manufactured from pure grade 4 titanium. The implant is acid etched except for the neck, which is machined to a smooth finish. Stern AC Implants are manufactured with a flared neck, used for one-stage, transgingival implantation. The neck and body include an internal taper and octagon. The implants are manufactured with three body 0085diameters, 3.3 mm, 4.0 mm, and 5.0 mm, all with the same prosthetic head. Intended to be used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. The Stern AC Dental Implant System is intended for delayed loading. It is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern AC Implant 5.0 x 8.5mm, Ti
STERNGOLD DENTAL LLC
The Stern AC Implant is a self-tapping, double thread screw implant, manufactured from pure grade 4 titanium. The implant is acid etched except for the neck, which is machined to a smooth finish. Stern AC Implants are manufactured with a flared neck, used for one-stage, transgingival implantation. The neck and body include an internal taper and octagon. The implants are manufactured with three body diameters, 3.3 mm, 4.0 mm, and 5.0 mm, all with the same prosthetic head. Intended to be used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. The Stern AC Dental Implant System is intended for delayed loading. It is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern AC Implant 4.0 x 11.5mm, Ti
STERNGOLD DENTAL LLC
The Stern AC Implant is a self-tapping, double thread screw implant, manufactured from pure grade 4 titanium. The implant is acid etched except for the neck, which is machined to a smooth finish. Stern AC Implants are manufactured with a flared neck, used for one-stage, transgingival implantation. The neck and body include an internal taper and octagon. The implants are manufactured with three body diameters, 3.3 mm, 4.0 mm, and 5.0 mm, all with the same prosthetic head. Intended to be used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. The Stern AC Dental Implant System is intended for delayed loading. It is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern AC Implant 4.0 x 10mm, Ti
STERNGOLD DENTAL LLC
The Stern AC Implant is a self-tapping, double thread screw implant, manufactured from pure grade 4 titanium. The implant is acid etched except for the neck, which is machined to a smooth finish. Stern AC Implants are manufactured with a flared neck, used for one-stage, transgingival implantation. The neck and body include an internal taper and octagon. The implants are manufactured with three body diameters, 3.3 mm, 4.0 mm, and 5.0 mm, all with the same prosthetic head. Intended to be used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. The Stern AC Dental Implant System is intended for delayed loading. It is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern AC Implant 4.0 x 8.5mm, Ti
STERNGOLD DENTAL LLC
The Stern AC Implant is a self-tapping, double thread screw implant, manufactured from pure grade 4 titanium. The implant is acid etched except for the neck, which is machined to a smooth finish. Stern AC Implants are manufactured with a flared neck, used for one-stage, transgingival implantation. The neck and body include an internal taper and octagon. The implants are manufactured with three body diameters, 3.3 mm, 4.0 mm, and 5.0 mm, all with the same prosthetic head. Intended to be used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. The Stern AC Dental Implant System is intended for delayed loading. It is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern AC Implant 3.3 x 13mm, Ti
STERNGOLD DENTAL LLC
The Stern AC Implant is a self-tapping, double thread screw implant, manufactured from pure grade 4 titanium. The implant is acid etched except for the neck, which is machined to a smooth finish. Stern AC Implants are manufactured with a flared neck, used for one-stage, transgingival implantation. The neck and body include an internal taper and octagon. The implants are manufactured with three body diameters, 3.3 mm, 4.0 mm, and 5.0 mm, all with the same prosthetic head. Intended to be used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. The Stern AC Dental Implant System is intended for delayed loading. It is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern AC Implant 3.3 x 11.5mm, Ti
STERNGOLD DENTAL LLC
The Stern AC Implant is a self-tapping, double thread screw implant, manufactured from pure grade 4 titanium. The implant is acid etched except for the neck, which is machined to a smooth finish. Stern AC Implants are manufactured with a flared neck, used for one-stage, transgingival implantation. The neck and body include an internal taper and octagon. The implants are manufactured with three body diameters, 3.3 mm, 4.0 mm, and 5.0 mm, all with the same prosthetic head. Intended to be used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. The Stern AC Dental Implant System is intended for delayed loading. It is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern AC Implant 3.3 x 10mm, Ti
STERNGOLD DENTAL LLC
The Stern AC Implant is a self-tapping, double thread screw implant, manufactured from pure grade 4 titanium. The implant is acid etched except for the neck, which is machined to a smooth finish. Stern AC Implants are manufactured with a flared neck, used for one-stage, transgingival implantation. The neck and body include an internal taper and octagon. The implants are manufactured with three body diameters, 3.3 mm, 4.0 mm, and 5.0 mm, all with the same prosthetic head. Intended to be used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. The Stern AC Dental Implant System is intended for delayed loading. It is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern IC Acid Etched Implant 4.8mm RN, 1.8mm collar, 10mm, Ti
STERNGOLD DENTAL LLC
The Stern IC Dental Implant device is a root-form dental implant with a screw-type body, acid etched except for the neck of the implant, which is machined to a smooth finish. It is manufactured from pure grade 4 titanium with a flared neck, used for one-stage, transgingival or subgingival implantation. The neck and body include an internal taper and octagon. The implants are composed of grade 4 commercially pure titanium and are available in a range of lengths and diameters.The Stern IC Dental implant System is intended for long term surgical implantation in the bone of the patient’s upper or lower arch to provide immediate load or delayed load of prosthetic systems, such as artificial teeth, in order to restore the patient’s chewing function. It is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern IC Acid Etched Implant 4.8mm RN, 1.8mm collar, 8mm, Ti
STERNGOLD DENTAL LLC
The Stern IC Dental Implant device is a root-form dental implant with a screw-type body, acid etched except for the neck of the implant, which is machined to a smooth finish. It is manufactured from pure grade 4 titanium with a flared neck, used for one-stage, transgingival or subgingival implantation. The neck and body include an internal taper and octagon. The implants are composed of grade 4 commercially pure titanium and are available in a range of lengths and diameters.The Stern IC Dental implant System is intended for long term surgical implantation in the bone of the patient’s upper or lower arch to provide immediate load or delayed load of prosthetic systems, such as artificial teeth, in order to restore the patient’s chewing function. It is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern IC Acid Etched Implant 3.3mm RN, 1.8mm collar, 14mm, Ti
STERNGOLD DENTAL LLC
The Stern IC Dental Implant device is a root-form dental implant with a screw-type body, acid etched except for the neck of the implant, which is machined to a smooth finish. It is manufactured from pure grade 4 titanium with a flared neck, used for one-stage, transgingival or subgingival implantation. The neck and body include an internal taper and octagon. The implants are composed of grade 4 commercially pure titanium and are available in a range of lengths and diameters.The Stern IC Dental implant System is intended for long term surgical implantation in the bone of the patient’s upper or lower arch to provide immediate load or delayed load of prosthetic systems, such as artificial teeth, in order to restore the patient’s chewing function. It is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern IC Acid Etched Implant 3.3mm RN, 1.8mm collar, 12mm, Ti
STERNGOLD DENTAL LLC
The Stern IC Dental Implant device is a root-form dental implant with a screw-type body, acid etched except for the neck of the implant, which is machined to a smooth finish. It is manufactured from pure grade 4 titanium with a flared neck, used for one-stage, transgingival or subgingival implantation. The neck and body include an internal taper and octagon. The implants are composed of grade 4 commercially pure titanium and are available in a range of lengths and diameters.The Stern IC Dental implant System is intended for long term surgical implantation in the bone of the patient’s upper or lower arch to provide immediate load or delayed load of prosthetic systems, such as artificial teeth, in order to restore the patient’s chewing function. It is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern IC Acid Etched Implant 3.3mm RN, 1.8mm collar, 10mm, Ti
STERNGOLD DENTAL LLC
The Stern IC Dental Implant device is a root-form dental implant with a screw-type body, acid etched except for the neck of the implant, which is machined to a smooth finish. It is manufactured from pure grade 4 titanium with a flared neck, used for one-stage, transgingival or subgingival implantation. The neck and body include an internal taper and octagon. The implants are composed of grade 4 commercially pure titanium and are available in a range of lengths and diameters.The Stern IC Dental implant System is intended for long term surgical implantation in the bone of the patient’s upper or lower arch to provide immediate load or delayed load of prosthetic systems, such as artificial teeth, in order to restore the patient’s chewing function. It is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern IC Acid Etched Implant 3.3mm RN, 1.8mm collar, 8mm, Ti
STERNGOLD DENTAL LLC
The Stern IC Dental Implant device is a root-form dental implant with a screw-type body, acid etched except for the neck of the implant, which is machined to a smooth finish. It is manufactured from pure grade 4 titanium with a flared neck, used for one-stage, transgingival or subgingival implantation. The neck and body include an internal taper and octagon. The implants are composed of grade 4 commercially pure titanium and are available in a range of lengths and diameters.The Stern IC Dental implant System is intended for long term surgical implantation in the bone of the patient’s upper or lower arch to provide immediate load or delayed load of prosthetic systems, such as artificial teeth, in order to restore the patient’s chewing function. It is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern IC Acid Etched Implant 4.1mm RN, 1.8mm collar, 14mm, Ti
STERNGOLD DENTAL LLC
The Stern IC Dental Implant device is a root-form dental implant with a screw-type body, acid etched except for the neck of the implant, which is machined to a smooth finish. It is manufactured from pure grade 4 titanium with a flared neck, used for one-stage, transgingival or subgingival implantation. The neck and body include an internal taper and octagon. The implants are composed of grade 4 commercially pure titanium and are available in a range of lengths and diameters.The Stern IC Dental implant System is intended for long term surgical implantation in the bone of the patient’s upper or lower arch to provide immediate load or delayed load of prosthetic systems, such as artificial teeth, in order to restore the patient’s chewing function. It is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern IC Acid Etched Implant 4.1mm RN, 1.8mm collar, 12mm, Ti
STERNGOLD DENTAL LLC
The Stern IC Dental Implant device is a root-form dental implant with a screw-type body, acid etched except for the neck of the implant, which is machined to a smooth finish. It is manufactured from pure grade 4 titanium with a flared neck, used for one-stage, transgingival or subgingival implantation. The neck and body include an internal taper and octagon. The implants are composed of grade 4 commercially pure titanium and are available in a range of lengths and diameters.The Stern IC Dental implant System is intended for long term surgical implantation in the bone of the patient’s upper or lower arch to provide immediate load or delayed load of prosthetic systems, such as artificial teeth, in order to restore the patient’s chewing function. It is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern IC Acid Etched Implant 4.1mm RN, 1.8mm collar, 10mm, Ti
STERNGOLD DENTAL LLC
The Stern IC Dental Implant device is a root-form dental implant with a screw-type body, acid etched except for the neck of the implant, which is machined to a smooth finish. It is manufactured from pure grade 4 titanium with a flared neck, used for one-stage, transgingival or subgingival implantation. The neck and body include an internal taper and octagon. The implants are composed of grade 4 commercially pure titanium and are available in a range of lengths and diameters. It is intended for long term surgical implantation in the bone of the patient’s upper or lower arch to provide immediate load or delayed load of prosthetic systems, such as artificial teeth, in order to restore the patient’s chewing function. The Stern IC Dental Implant System is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern IC Acid Etched Implant 4.1mm RN, 1.8mm collar, 8mm, Ti
STERNGOLD DENTAL LLC
The Stern IC Dental Implant device is a root-form dental implant with a screw-type body, acid etched except for the neck of the implant, which is machined to a smooth finish. It is manufactured from pure grade 4 titanium with a flared neck, used for one-stage, transgingival or subgingival implantation. The neck and body include an internal taper and octagon. The implants are composed of grade 4 commercially pure titanium and are available in a range of lengths and diameters. It is intended for long term surgical implantation in the bone of the patient’s upper or lower arch to provide immediate load or delayed load of prosthetic systems, such as artificial teeth, in order to restore the patient’s chewing function. The Stern IC Dental Implant System is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern IC Acid Etched Implant 3.3mm RN, 1.8mm, 14mm,Biomain, Ti
STERNGOLD DENTAL LLC
The Stern IC Dental Implant device is a root-form dental implant with a screw-type body, acid etched except for the neck of the implant, which is machined to a smooth finish. It is manufactured from pure grade 4 titanium with a flared neck, used for one-stage, transgingival or subgingival implantation. The neck and body include an internal taper and octagon. The implants are composed of grade 4 commercially pure titanium and are available in a range of lengths and diameters. It is intended for long term surgical implantation in the bone of the patient’s upper or lower arch to provide immediate load or delayed load of prosthetic systems, such as artificial teeth, in order to restore the patient’s chewing function. The Stern IC Dental Implant System is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern IC Acid Etched Implant 3.3mm RN, 1.8mm, 12mm,Biomain, Ti
STERNGOLD DENTAL LLC
The Stern IC Dental Implant device is a root-form dental implant with a screw-type body, acid etched except for the neck of the implant, which is machined to a smooth finish. It is manufactured from pure grade 4 titanium with a flared neck, used for one-stage, transgingival or subgingival implantation. The neck and body include an internal taper and octagon. The implants are composed of grade 4 commercially pure titanium and are available in a range of lengths and diameters. It is intended for long term surgical implantation in the bone of the patient’s upper or lower arch to provide immediate load or delayed load of prosthetic systems, such as artificial teeth, in order to restore the patient’s chewing function. The Stern IC Dental Implant System is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern IC Acid Etched Implant 3.3mm RN, 1.8mm, 10mm,Biomain, Ti
STERNGOLD DENTAL LLC
The Stern IC Dental Implant device is a root-form dental implant with a screw-type body, acid etched except for the neck of the implant, which is machined to a smooth finish. It is manufactured from pure grade 4 titanium with a flared neck, used for one-stage, transgingival or subgingival implantation. The neck and body include an internal taper and octagon. The implants are composed of grade 4 commercially pure titanium and are available in a range of lengths and diameters. It is intended for long term surgical implantation in the bone of the patient’s upper or lower arch to provide immediate load or delayed load of prosthetic systems, such as artificial teeth, in order to restore the patient’s chewing function. The Stern IC Dental Implant System is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern IC Acid Etched Implant 3.3mm RN, 1.8mm, 8mm, Biomain, Ti
STERNGOLD DENTAL LLC
The Stern IC Dental Implant device is a root-form dental implant with a screw-type body, acid etched except for the neck of the implant, which is machined to a smooth finish. It is manufactured from pure grade 4 titanium with a flared neck, used for one-stage, transgingival or subgingival implantation. The neck and body include an internal taper and octagon. The implants are composed of grade 4 commercially pure titanium and are available in a range of lengths and diameters. It is intended for long term surgical implantation in the bone of the patient’s upper or lower arch to provide immediate load or delayed load of prosthetic systems, such as artificial teeth, in order to restore the patient’s chewing function. The Stern IC Dental Implant System is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern IC Acid Etched Implant 4.1mm RN, 1.8mm, 14mm, Biomain, Ti
STERNGOLD DENTAL LLC
The Stern IC Dental Implant device is a root-form dental implant with a screw-type body, acid etched except for the neck of the implant, which is machined to a smooth finish. It is manufactured from pure grade 4 titanium with a flared neck, used for one-stage, transgingival or subgingival implantation. The neck and body include an internal taper and octagon. The implants are composed of grade 4 commercially pure titanium and are available in a range of lengths and diameters. It is intended for long term surgical implantation in the bone of the patient’s upper or lower arch to provide immediate load or delayed load of prosthetic systems, such as artificial teeth, in order to restore the patient’s chewing function. The Stern IC Dental Implant System is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern IC Acid Etched Implant 4.1mm RN, 1.8mm, 12mm, Biomain, Ti
STERNGOLD DENTAL LLC
The Stern IC Dental Implant device is a root-form dental implant with a screw-type body, acid etched except for the neck of the implant, which is machined to a smooth finish. It is manufactured from pure grade 4 titanium with a flared neck, used for one-stage, transgingival or subgingival implantation. The neck and body include an internal taper and octagon. The implants are composed of grade 4 commercially pure titanium and are available in a range of lengths and diameters. It is intended for long term surgical implantation in the bone of the patient’s upper or lower arch to provide immediate load or delayed load of prosthetic systems, such as artificial teeth, in order to restore the patient’s chewing function. The Stern IC Dental Implant System is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern IC Acid Etched Implant 4.1mm RN, 1.8mm, 10mm, Biomain, Ti
STERNGOLD DENTAL LLC
The Stern IC Dental Implant device is a root-form dental implant with a screw-type body, acid etched except for the neck of the implant, which is machined to a smooth finish. It is manufactured from pure grade 4 titanium with a flared neck, used for one-stage, transgingival or subgingival implantation. The neck and body include an internal taper and octagon. The implants are composed of grade 4 commercially pure titanium and are available in a range of lengths and diameters. It is intended for long term surgical implantation in the bone of the patient’s upper or lower arch to provide immediate load or delayed load of prosthetic systems, such as artificial teeth, in order to restore the patient’s chewing function. The Stern IC Dental Implant System is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
Stern IC Acid Etched Implant 4.1mm RN, 1.8mm, 8mm, Biomain, Ti
STERNGOLD DENTAL LLC
The Stern IC Dental Implant device is a root-form dental implant with a screw-type body, acid etched except for the neck of the implant, which is machined to a smooth finish. It is manufactured from pure grade 4 titanium with a flared neck, used for one-stage, transgingival or subgingival implantation. The neck and body include an internal taper and octagon. The implants are composed of grade 4 commercially pure titanium and are available in a range of lengths and diameters.It is intended for long term surgical implantation in the bone of the patient’s upper or lower arch to provide immediate load or delayed load of prosthetic systems, such as artificial teeth, in order to restore the patient’s chewing function. The Stern IC Dental Implant System is also indicated for immediate loading with good primary stability and appropriate occlusal loading.
0
-
ERA 3.25MM IMP 0DEG MICRO HEAD 15X4MM ACID ETCH, Ti
STERNGOLD DENTAL LLC
Designed for both transitional and long-term denture stabilization, the ERA Micro Dental Implant features the capability to correct implant mis-angulation. Four unique angle options offer flexibility to achieve the desired path of insertion for denture stabilization, even when implants are placed in narrow, resorbed ridges. The ERA implant enables the transitional function of a denture during the osseointegration of traditional implants, as well as long term, affordable chairside denture stabilization. This multi-dimensional system comprises the ERA implant, prosthetic components, including the angulation-correction, vertically resilient properties of the ERA Attachments. For surgical implantation in the maxillary or mandibular arch to support dental restorations such as artificial teeth, in order to restore the patient’s chewing function. Intended for long-term as well as temporary surgical implantation in the bone of the patient’s upper or lower arch to provide immediate load or delayed load of prosthetic systems. Immediate loading should only occur when the position of the implants provides adequate bone quantity and quality to allow proper immediate mechanical stabilization of the self-tapping screw into the bone.
0
-
ERA 3.25MM IMP 0DEG MICRO HEAD 15X3MM ACID ETCH, Ti
STERNGOLD DENTAL LLC
Designed for both transitional and long-term denture stabilization, the ERA Micro Dental Implant features the capability to correct implant mis-angulation. Four unique angle options offer flexibility to achieve the desired path of insertion for denture stabilization, even when implants are placed in narrow, resorbed ridges. The ERA implant enables the transitional function of a denture during the osseointegration of traditional implants, as well as long term, affordable chairside denture stabilization. This multi-dimensional system comprises the ERA implant, prosthetic components, including the angulation-correction, vertically resilient properties of the ERA Attachments. For surgical implantation in the maxillary or mandibular arch to support dental restorations such as artificial teeth, in order to restore the patient’s chewing function. Intended for long-term as well as temporary surgical implantation in the bone of the patient’s upper or lower arch to provide immediate load or delayed load of prosthetic systems. Immediate loading should only occur when the position of the implants provides adequate bone quantity and quality to allow proper immediate mechanical stabilization of the self-tapping screw into the bone.