"PAPARELLA Ear Hook, 6 1/2"", (165 mm), malleable shaft, #13, 1 x 4 mm, non-sterile, reusable"

"ROSEN FENESTROMETER GRADUATED IN MILLIMETERS, TO 4MM MAXIMUM OVERALL LENGTH 6-3/8"" (16.2CM)"

"MCCABE MEASURING INSTRUMENT SLIGHTLY CURVED ROUND SHAFT W/CALIBRATIONS AT 3, 4 & 5MM OVERALL LENGTH 6-1/8""(15.6CM)"

"PAPARELLA FENESTROMETER NO 13 MEASURING 4MM WIDE OVERALL LENGTH 6-1/2""(16.5CM)"

A surgical instrument designed to accurately determine the depth of a recess (usually a drilled hole). It typically consists of a moveable (sliding) centrepiece (a prong), the tip of which is inserted into the recess; when the tip makes contact with the bottom a reading is visually taken from a scale marked on the side of the device. It is often used to measure the depth of holes being drilled in bone so that the surgeon can determine the length of the bone screw to be used. It is made of corrosive resistant materials [e.g., stainless steel, titanium (Ti)]. This is a reusable device intended to be sterilized prior to use.

A surgical instrument designed to accurately determine the depth of a recess (usually a drilled hole). It typically consists of a moveable (sliding) centrepiece (a prong), the tip of which is inserted into the recess; when the tip makes contact with the bottom a reading is visually taken from a scale marked on the side of the device. It is often used to measure the depth of holes being drilled in bone so that the surgeon can determine the length of the bone screw to be used. It is made of corrosive resistant materials [e.g., stainless steel, titanium (Ti)]. This is a reusable device intended to be sterilized prior to use.

A surgical instrument designed to accurately determine the depth of a recess (usually a drilled hole). It typically consists of a moveable (sliding) centrepiece (a prong), the tip of which is inserted into the recess; when the tip makes contact with the bottom a reading is visually taken from a scale marked on the side of the device. It is often used to measure the depth of holes being drilled in bone so that the surgeon can determine the length of the bone screw to be used. It is made of corrosive resistant materials [e.g., stainless steel, titanium (Ti)]. This is a reusable device intended to be sterilized prior to use.

SILVERSTEIN ALTO TOTAL W/TACK SIZERS INCLUDED TITANIUM/SILICONE

OWENS ASSURE ALTO TOTAL W/INTEGRATED SHOE - SIZERS INCLUDED TITANIUM/SILICONE

OFFSET NANO ALTO TOTAL SIZERS INCLUDED TITANIUM/SILICONE

CENTERED ALTO TOTAL W/INTEGRATED SHOE/SIZERS INCLUDED TITANIUM/SILICONE

CENTERED ALTO TOTAL 15MM LENGTH, SIZERS INCLUDED TITANIUM/SILICONE

BOJRAB ALTO TOTAL W/INTEGRATED SHOE SIZERS INCLUDED HA/TITANIUM/SILICONE

DORNHOFFER ALTO TOTAL W/SHOE & WINDOWS-SIZERS INCLUDED HA/TITANIUM/SILICONE

HA LITE ALTO TOTAL SIZERS INCLUDED HA/TITANIUM/SILICONE

HA LITE ALTO TOTAL 15MM LENGTH, SIZERS INCLUDED HA/TITANIUM/SILICONE

HA LITE ALTO TOTAL W/INTEGRATED SHOE SIZERS INCLUDED HA/TITANIUM/SILICONE

DORNHOFFER ALTO TOTAL SIZERS INCLUDED HA/TITANIUM/SILICONE

DORNHOFFER ALTO TOTAL W/WINDOWS SIZERS INCLUDED HA/TITANIUM/SILICONE

BOJRAB ALTO PRECUT TOTAL 5.00 - 6.25MM L SIZERS INCLUDED HA/TITANIUM/SILICONE

2 IN 1 ALTO SIZERS INCLUDED HA/TITANIUM/SILICONE

GLUTH ALTO TOTAL SIZERS INCLUDED TITANIUM/SILICONE

CENTERED ALTO PARTIAL 7MM LENGTH, SIZERS INCLUDED TITANIUM/SILICONE

WEDGE INCUS STRUT SHORT SIZERS INCLUDED TITANIUM/SILICONE

Integra® Micro-Worktable Piston Trimming Gauge

FENESTROMETER MCO38

for stapes prostheses 3.5 / 4.0 / 4.5 mm, 16 cm

for middle ear prostheses, slidable 0-8 mm, 18.5 cm, non-dismountable

for middle ear prostheses, slideable from 0-8 mm, 18.5 cm, dismountable

for stapes prostheses, straight 3.5/4.0/4.5 mm, 16 cm

for stapes prostheses, curved 3.5 / 4.0 / 4.5 mm, 16 cm

for middle ear prostheses length 2.5 mm, 16 cm

for middle ear prostheses length 2.75 mm, 16 cm

for middle ear prostheses length 3.0 mm, 16 cm

for middle ear prostheses length 3.25 mm, 16 cm

for middle ear prostheses length 3.5 mm, 16 cm

for middle ear prostheses length 3.75 mm, 16 cm

for middle ear prostheses length 4.0 mm, 16 cm

for middle ear prostheses length 4.25 mm, 16 cm

for middle ear prostheses length 4.5 mm, 16 cm

for middle ear prostheses length 4.75 mm, 16 cm

for middle ear prostheses length 5.0 mm, 16 cm

for stapes prostheses 0.4 mm, 16 cm

for stapes prostheses 0.6 mm, 16 cm

for stapes prostheses 0.8 mm, 16 cm

20 mm scale 8 cm

for rhinoplasty, angled 17 cm